[App_rpt-users] URI Configuration/Testing

[Rod Schnell]

Yeah I found that jumper when verifying the pin outs of the 16 pin plug. And
verified it in the programming for the 750.

Rod

On Mon, Feb 7, 2011 at 4:45 PM, Steve Agee <n5zua at earthlink.net> wrote:

>  Did you change JU551 on the GM300 from it's default setting of
> de-emphasized audio to get discriminator audio to pin 11 of the 16 pin
> connector instead?
>
> N5ZUA
>
> ----- Original Message -----
> *From:* Rod Schnell <n2oyj.ham at gmail.com>
> *To:* app_rpt-users at ohnosec.org
> *Sent:* Monday, February 07, 2011 4:34 PM
> *Subject:* [App_rpt-users] URI Configuration/Testing
>
> Hi all,
>
> I've gotten my (N2OYJ) system up and functioning in a simple mode so I can
> have access to the local repeater from the computer room.  A friend and I
> are trying to set up another unit for something similar. Using XIPAR as the
> base, a URI and either a CDM750 or GM300 as the radio it attached to.
>
> There appears to be an issue I haven't yet found.  Using the working
> configuration from my system as a starting point, the 'radio tune rxnoise'
> returns the error as if there is no signal on the flat audio pin (PIN 11).
> This occurs on BOTH radios.  The next step is to bring the working radio/URI
> combination to the non-working system and see it the error remains, then
> switch URI's;all to try and isolate the problem.
>
> Q: Is there a way to test the URI? Either using a signal generator or not
> using a generator (both was might be good for others).
>
> Rod
> N2OYJ
>
> ------------------------------
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20110207/af214700/attachment.html>