[App_rpt-users] Squelch Tail

Sat Feb 12 12:37:20 UTC 2011

Well - as I said, that is "my understanding"

And my understanding comes from this section in the sample config file

ctcssfrom=dsp        ; no,usb,dsp

                     ; no - CTCSS decoding, system will be carrier squelch

                     ; usb - CTCSS decoding using input from USB FOB 

                     ; (currently not supported)

                     ; dsp - CTCSS decoding using RX audio in DSP.

                     ; rxdemod option must be set to flat for this to work.

Ken

From: Jim Duuuude [mailto:telesistant at hotmail.com] 
Sent: Friday, February 11, 2011 10:59 PM
To: ke2n at cs.com; kf4gta at amsat.org; app_rpt mailing list
Subject: RE: [App_rpt-users] Squelch Tail

what makes you think that??

  _____  

From: ke2n at cs.com
To: kf4gta at amsat.org; app_rpt-users at ohnosec.org
Date: Fri, 11 Feb 2011 19:59:07 -0500
Subject: Re: [App_rpt-users] Squelch Tail

I don't know if it has any bearing on your problem but my understanding is
that 

ctcssfrom=usb 

is not supported

you need to use DSP or "no"

Ken

From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Bobby Lacey
Sent: Friday, February 11, 2011 7:39 PM
To: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Squelch Tail

I thought rxondelay=25 fixed the problem, but I connected up to another
allstar node tonight and the ping pong effect started again. I also seem to
have instances of audio dropping out when I'm listening over a link with my
HT or mobile. If I listen to the audio through my SIP phone extension, it
sounds fine.

I'm running version 0.281 if that helps.

Would there be anyone brave enough to help me tweak my system?

Thanks for any advice & 73

Bobby

KF4GTA

On Fri, Feb 4, 2011 at 4:33 PM, Tim Sawyer <tim.sawyer at me.com> wrote:

See if this helps...

http://209.159.155.200/drupal/node/170
--
Tim
:wq

On Feb 4, 2011, at 8:53 AM, Bobby Lacey wrote:

> Hi,
>
> I am a newcomer to Allstar and have just set up my node this week. I had a
few wrinkles that I was able to iron out in time by reading the archives,
but I haven't been able to fix the following problem.
>
> My node has a squelch tail that won't go away and seems to cycle
constantly once it gets going. I'm using a URI to a Kenwood TM-D700a and my
node is in simplex mode. I still think I may have bugs in my tuning area. My
config is pasted below and I would love any help that anyone could provide.
Thanks & 73.
>
> Bobby KF4GTA
>
> ## rpt.conf ##
>
>
> [27633]                                 ; Change this to your assigned
node number
>
> rxchannel=Radio/usb27633
> duplex=0
> erxgain=-3
> etxgain=3
> ;controlstates=controlstates
> scheduler=schedule27633
> morse=morse27633
> macro=macro27633
> functions=functions27633
> phone_functions=functions27633
> link_functions=functions27633
> telemetry=telemetry
> wait_times=wait-times
> context =  radio
> callerid = "Repeater" <0000000000>
> idrecording = |iKF4GTA
> accountcode=RADIO
> hangtime=100
> althangtime=100
> totime=170000
> idtime=540000
> politeid=3000
>
> idtalkover=|iKF4GTA
> unlinkedct=ct2
> remotect=ct3
> linkunkeyct=ct8
> ;nolocallinkct=0
> ;eannmode=1
> ;connpgm=yourconnectprogram
> ;discpgm=yourdisconnectprogram
> ;lnkactenable=0
> ;lnkacttime=1800
> ;lnkactmacro=*52
> ;lnkacttimerwarn=30seconds
> ;remote_inact_timeout=1800
> ;remote_timeout=3600
> nounkeyct=0
> ;holdofftelem=0
> beaconing=0
>
>
> ## usbradio.conf ##
>
> [general]
>
> [usb27633]
>
> hdwtype=0
> rxboost=0
> txboost=1
> rxctcssrelax=1
> txctcssdefault=100.0
> rxctcssfreqs=100.0
> txctcssfreqs=100.0
> ;rxctcssoverride=0
> carrierfrom=usb
> ctcssfrom=usb
> rxdemod=speaker
> txprelim=yes
> txlimonly=no
> txtoctype=notone
> txmixa=composite
> txmixb=no
> invertptt=0
> duplex=0
> rxondelay=0
> rxnoisefiltype=0
> eeprom=0
>
> #includeifexists custom/usbradio.conf
>
>
>
> ## usbradio_tune_usb27633.conf ##
>
> [usb27633]
> ; name=usb27633
> ; devicenum=0
> devstr=3-1
> rxmixerset=1000
> txmixaset=200
> txmixbset=500
> rxvoiceadj=0.149018
> rxctcssadj=0.500000
> txctcssadj=200
> rxsquelchadj=1
>

> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

_______________________________________________ App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20110212/59058eb3/attachment.html>