[App_rpt-users] Node link on non-standard port

[Rod Schnell]

does this create the config file for my server or for the allstar network?

I've/we've manually created the machines using XIPAR.

Rod

On Sat, Feb 12, 2011 at 11:03 AM, Jim Duuuude <telesistant at hotmail.com>wrote:

>  Did you set the UDP port to 4568 in the server config on the portal??
>
> ------------------------------
> Date: Sat, 12 Feb 2011 11:02:05 -0600
> From: n2oyj.ham at gmail.com
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] Node link on non-standard port
>
>
> Got two nodes. Originally setup using standard port 4569.  Changed ports to
> 4568 1) to see how it was done & 2) to separate the asterisk machines and
> set up home phone system (again).
>
> Ports changed and connects to Allstar OK. iaxRPT works by adding port to IP
> address.  So far no problem.
>
> N0MIJ tries to connect via his Allstar node (also on non-standard port
> 4568) and he says the CLI show it trying to connect via the 4569 port.
> Q: have we missed something in changing ports? If so where and what?
> Q: the file which Allstar update: 1) can it be forced to update w/o
> restarting node? 2) are ports given in the updated file? 3) what file is it?
> so we can check/verify.
>
> Rod
> N2OYJ
>
> and for Eric - N0MIJ
>
> _______________________________________________ App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20110212/d0def1d1/attachment.html>