[App_rpt-users] aprs password for app_gps

[Jim Duuuude]

Okay, the web site now has automatic APRS password generation for Web-based
configurations, and a page to do it manually (under "server").

JIM WB6NIL

From: telesistant at hotmail.com
To: yo3iiu at yo3iiu.ro; rpt2 at chuck.midlandsnetworking.com
Date: Sun, 23 Jan 2011 08:13:51 -0800
CC: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] aprs password for app_gps








The heck with all this confusion regarding APRS passwords!!

I just reverse engineered the password algorithm and will make
a password generator (and will also automatically generate a password
for Portal-generate configurations).

JIM

> Date: Sun, 23 Jan 2011 15:49:55 +0200
> From: yo3iiu at yo3iiu.ro
> To: rpt2 at chuck.midlandsnetworking.com
> CC: app_rpt-users at ohnosec.org
> Subject: Re: [App_rpt-users] aprs password for app_gps
> 
> The APRS-IS password could be generated using the callpass utility that
> comes with xastir.
> 
> Bogdan - YO3IIU
> 
> > I would like to set up my allstarlink system to report position
> > information
> > to the aprs system.
> >
> > Can someone tell me how to set up this password?  Also, are the default
> > server and port listed in the example below what should be used?
> > I have searched the aprs site and couldn't find who to request this
> > information from.
> >
> > Chuck Henderson,  WB9UUS
> >
> >
> >>
> >> ; Configuration for app_gps
> >> ;
> >> [general]
> >>
> >> call = wb9uus-2   ; callsign (including SSID) for APRS purposes*password
> >> = 12345 ; Password for APRS-IS server for above callsign*
> >> comment = AllStar Node 27468 ; Text to be displayed associated with this
> >> station*server = second.aprs.net  ; APRS-IS server to report information
> >> to**port = 10151 ; port on server to send data*
> >> icon = r  ; A CAR (default)   Icon do be displayed for station on APRS
> >> display (see below)
> >> comport = /dev/ttyS0  ; Serial port for GPS receiver (specify this only
> >> if using GPS receiver)
> >> baudrate = 4800  ; Baud rate for GPS receiver (specify this only if
> >> using GPS receiver)
> >> ;debug = y ; set this for debug output
> >> freq=442.700  ; Display Frequency of station
> >> tone=107.2    ; CTCSS tone of station (0.0 for none)
> >> lat=40.508    ; Fixed (default) latitude in decimal degrees
> >> lon=-88.988   ; Fixed (default) longitude in decimal degrees
> >> elev=123.4    ; Elevation of Antenna in Meters (*NOT* HAAT)
> >> power=9       ; Power level (see below)
> >> height=5      ; Antenna Height in HAAT (see below)
> >> gain=8        ; Antenna Gain (see below)
> >> dir=0         ; Antenna Direction (see below)
> >>
> >> On Sat, Jan 22, 2011 at 10:30 PM, Jim Duuuude
> >> <telesistant at hotmail.com>wrote:
> >>
> >>>  There have (obviously) been some changes/improvements made to the
> >>> Echolink and APRS/GPS subsystems within app_rpt.
> >>>
> >>> Included in these is the ability for a node to report its "fixed" GPS
> >>> coordinates
> >>> to the APRS network, even if it does not have a GPS receiver connected.
> >>>
> >>> Please see the following:
> >>>
> >>> Setting up Echolink Connectivity
> >>> http://209.159.155.200/drupal/node/56
> >>>
> >>> Setting Up APRS and GPS Configuration
> >>> http://209.159.155.200/drupal/node/179
> >>>
> >>> Of course, the latest copies of app_gps and chan_echolink need to be
> >>> downloaded from the SVN.
> >>>
> >>> JIM WB6NIL
> >>>
> >>>
> >>>
> >>
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
 		 	   		  

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20110123/23c42108/attachment.html>