[App_rpt-users] Voting

[Jim Duuuude]

Unfortunately physics does not allow (for several reasons) data to be decoded from the audio
as a result of any type of voting system. The only way to accomplish voting using digital audio
is to decode the digital stream (at least into digital data) at the voting receiver site, *then* send
the decoded audio data as packets for voting etc.

JIM WB6NIL


From: ke2n at cs.com
To: telesistant at hotmail.com; app_rpt-users at ohnosec.org
Subject: Voting
Date: Mon, 30 May 2011 19:55:51 -0400



 Jim – any chance that the voting system could have an option to run the receiver sound conversion at a higher sampling rate (>8000)? I am thinking it could also be used for a Dstar system – that means you need to reproduce what is coming out of the discriminator from near 0 Hz up to about 5.5 KHz with a relatively flat pass band. Ken 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20110531/61f59a46/attachment.html>