[App_rpt-users] Echolink

[Tim Sawyer]

Sorry for the slow response, I've been out of town. Put telemdefault=2 under your node stanza, not the telemetry stanza. ie...

[1999]
telemdefault=2

--
Tim
:wq

On Nov 25, 2011, at 4:12 AM, Lu Vencl wrote:

> Ok, I thing I understand.
> So I put this in under my current telemetry entry
> [telemetry]
> telemdefault=2 
> It however does not seem to work according to the value specified in the
> docs..
> 
> But it seems like it broke my courtesy beeps configuration now oddly enough.
> 
> -----Original Message-----
> From: Tim Sawyer [mailto:tim.sawyer at me.com] 
> Sent: Friday, November 25, 2011 1:13 AM
> To: Lu Vencl; App_rpt-users at ohnosec.org list
> Subject: Re: [App_rpt-users] Echolink
> 
> No, not just anywhere. Stanzas are parts of an Asterisk file denoted by
> square brackets []. See http://ohnosec.org/drupal/node/39
> 
> So, the node stanza is the part of the rpt.conf file after [your node
> number] and before the next set of square brackets.
> 
> Hope that helps. Have a Happy Thanksgiving.
> --
> Tim
> :wq
> 
> On Nov 24, 2011, at 10:20 AM, Lu Vencl wrote:
> 
>> Tim. Sorry I guess I am not well educated in this. So I just add a line
> anywhere in the file?
>> Happy Thanksgiving
>> 
>> Sent from my iPhone, Lu Vencl
>> 
>> On Nov 24, 2011, at 11:51 AM, Tim Sawyer <tim.sawyer at me.com> wrote:
>> 
>>> You'll need to add it to the node stanza of rpt.conf. 
>>> --
>>> Tim
>>> :wq
>>> 
>>> On Nov 24, 2011, at 2:29 AM, Lu Vencl wrote:
>>> 
>>>> Tim, 
>>>> Thanks for the info.. Which conf file will I find this in?  I looked in
> rpt
>>>> and could not find it.
>>>> Thanks
>>>> 
>>>> -----Original Message-----
>>>> From: Tim Sawyer [mailto:tim.sawyer at me.com] 
>>>> Sent: Wednesday, November 23, 2011 10:06 AM
>>>> To: Lu Vencl
>>>> Cc: App_rpt-users at ohnosec.org list
>>>> Subject: Re: [App_rpt-users] Echolink
>>>> 
>>>> Sure. Take a look at this link. http://ohnosec.org/drupal/node/103
>>>> 
>>>> --
>>>> Tim
>>>> :wq
>>>> 
>>>> On Nov 23, 2011, at 3:17 AM, Lu Vencl wrote:
>>>> 
>>>>> Hey Tim,
>>>>> Did not know about this "timed telemetry". Can you tell me more about
> it?
>>>>> How do I set it up?
>>>>> Thanks
>>>>> Lu
>>>>> KA4EPS
>>>>> 
>>>>> -----Original Message-----
>>>>> From: app_rpt-users-bounces at ohnosec.org
>>>>> [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Tim Sawyer
>>>>> Sent: Monday, November 21, 2011 9:32 PM
>>>>> To: Matt Roberts
>>>>> Cc: App_rpt-users at ohnosec.org
>>>>> Subject: Re: [App_rpt-users] Echolink
>>>>> 
>>>>> Timed telemetry will announce when you initiate a connection and for a
>>>> short
>>>>> time thereafter. Incoming connections are not announced except when one
>>>>> happens to come in during the timeout period.  
>>>>> --
>>>>> Tim
>>>>> :wq
>>>>> 
>>>>> On Nov 21, 2011, at 11:40 AM, Matt Roberts wrote:
>>>>> 
>>>>>> If I don't want to have all Echolink incoming connections announced,
> is
>>>>> there a way to have outgoing connections announced? If I set Echolink
>>>>> telemetry to timed, how does that work?
>>>>>> 
>>>>>> Matt Roberts
>>>>>> n9gmr at me.com
>>>>>> 
>>>>>> Sent from my iPhone
>>>>>> _______________________________________________
>>>>>> App_rpt-users mailing list
>>>>>> App_rpt-users at ohnosec.org
>>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>> 
>>>>> _______________________________________________
>>>>> App_rpt-users mailing list
>>>>> App_rpt-users at ohnosec.org
>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>> 
>>>> 
>>> 
>