[App_rpt-users] TX Delay??

[Travis Best]

My guess there has to be a way to have it play a 2 second file of 
silence before any transmission

On 10/2/2011 10:52 PM, Ken wrote:
> Take the sound recordings that say "good morning" "Good after noon" 
> etc., and re-record them - putting 2 seconds of dead air in front of 
> the audio.
> Ken
>
>
> -----Original Message-----
> From: Matt Beasant <g4rky at yahoo.co.uk>
> To: Travis Best <w3tmb1 at gmail.com>
> Cc: App_rpt-users <App_rpt-users at ohnosec.org>
> Sent: Sun, Oct 2, 2011 11:13 pm
> Subject: Re: [App_rpt-users] TX Delay??
>
> Hi Travis,
>
> In rpt.conf there is a section called wait-times.
>
> Here is a copy of the section I have in my rpt.conf file:
>
> (located in the node definition stanza near the top of rpt.conf, under 
> the node number)
> wait_times=wait-times; Wait times
>
> (then located between the [morse] stanza and the [node] stanza)
>
>
> ;
> ; This section allows wait times for telemetry events to be adjusted
> ; A section for wait times can be defined for every repeater
> ;
>
> [wait-times]
> telemwait=500                          ; Time to wait before sending 
> most telemetry
> idwait=500                              ; Time to wait before starting ID
> unkeywait=500                          ; Time to wait after unkey 
> before sending CT's and link telemetry
> calltermwait=2000                       ; Time to wait before 
> announcing "call terminated"
>
> Adjust the telemwait delay to suit your needs.
>
> Cheers
>
> Matt
> G4RKY
>
>
> On 1 October 2011 23:34, Travis Best <w3tmb1 at gmail.com 
> <mailto:w3tmb1 at gmail.com>> wrote:
>
>     Is there a way to delay the messages the XIPAR server put over the
>     air?? The problem I am having is for example if I send the *81
>     command to get the current time I will only hear the min's because
>     it is not keyed up long enough before it starts talking.
>
>     Thanks
>     for any help
>     W3TMB
>     Travis
>     _______________________________________________
>     App_rpt-users mailing list
>     App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>     http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org  <mailto:App_rpt-users at ohnosec.org>
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20111002/9119481e/attachment.html>