[App_rpt-users] Radio to Radio communication

[Zstart Zstar]

Dear Bob, Ken, and Brayn 


Thank you very much. Unfortunately, I was aware the Allstar Standard Commands (http://ohnosec.org/drupal/node/21). Your help resolves the issue. 


Thanks again. 


--
Best Regards. 

Matteo.



________________________________
From: Zstart Zstar <zstart22 at yahoo.com>
To: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
Sent: Thursday, October 27, 2011 11:30 AM
Subject: [App_rpt-users] Radio to Radio communication




Dear All, 


I am newbie to app_rpt. I have a basic question, I have searched about it, but I could not find an appropriate solution.

I have two radios which works in different frequency bands. Both are connected to Asterisk using URI. Reverse Autopatch is working fine from PSTN to the both radios. I want to establish a call between the radios. My question is that "is is possible to configure app_rpt to act as a bidirectional bridge between two radios?", i.e., when radio 1 activates PTT, its TX audio is transferred to radio 2 and vice versa.  


Any recommendation/answer would be appreciated. 


Thanks in advance. 

--
Best Regards. 

Matteo. 
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20111027/f8f20aea/attachment.html>