[App_rpt-users] Syntor X Remote Base

[Tim Sawyer]

Yes! Here's the applicable settings from the rpt.conf node stanza:

[your node number]
rxchannel = Simpleusb/usb		; Rx audio/signalling channel
remote = xcat
civaddr = 32
functions = functions-remote
;lconn = PP3=1
;ldisc = PP3=0
memory = memory				; Section to hold memory entries (optional)
					; remote=ft897 for Yaesu FT-897 or
					; remote=rbi for Doug Hall RBI1
					; remote=kenwood for Kenwood mobiles such as the TMG707A
					; remote=ic706 for the Icom IC-706
ioport = /dev/ttyS0			; Specify port for serial port (optional)
iospeed = 19200
dusbabek = yes                 ; either you need it or you don't

;iobase = 0x378				; Specify IO port for parallel port (optional)
authlevel = 2				; Remote base authentication level
;; authlevel = 0 : Anyone can use it
;; authlevel = 1 : Requires log in, Waits for Tx key to ask for it
;; authlevel = 2 : Requires log in, asks for it automously
;mars = 0                   ; set=1 for IC-706 w/MARS mods (optional)

remote_inact_timeout=0             ; Inactivity timer for remote base nodes only (set to 0 to disable).
remote_timeout=5400                  ; Session time out for remote base. (set to 0 to disable)


--
Tim
:wq

On Oct 28, 2011, at 2:23 PM, Monty wrote:

> Hello Everyone,
> I am wondering if anyone on the list has successfully integrated a Syntor X with an Xcat to app_rpt?  I have 2m and a 10m/6m flavor.  Would the 10m/6m have trouble?
> 
> Monty
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users