[App_rpt-users] cop 2 - causing PTT lock

[George Csahanin]

When you do "rpt showvars xxxx" does it show RPT_RXKEYED=0 or 1?

I've seen this if the levels/squelch setting not being right, lower noise 
being received signal, etc.

GeorgeC
W2DB

----- Original Message ----- 
From: "Lu Vencl" <vencl at att.net>
To: "'Ramesh Dhami (VA3UV)'" <Ramesh at va3uv.com>; "'app_rpt'" 
<app_rpt-users at ohnosec.org>
Sent: Saturday, October 29, 2011 8:35 PM
Subject: Re: [App_rpt-users] cop 2 - causing PTT lock


>I have been meaning to bring this up as well, but I have a little different
> scenario.
> I have a macro that runs the following: Cop 33, *71, then a series of node
> connects and then COP 34
> If this is performed on the RF side, the CLI verbose output shows a stuck 
> RX
> carrier. (I use PL decode via discriminator)
> All that is needed is a onetime quick PTT on the input and it clears. 
> Seems
> as it gets back into sync. If I issue the macro via CLI I don't get this
> issue.
> It happens to all of my nodes and it is pretty consistent.
>
>
> -----Original Message-----
> From: app_rpt-users-bounces at ohnosec.org
> [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Ramesh Dhami 
> (VA3UV)
> Sent: Saturday, October 29, 2011 9:20 PM
> To: app_rpt
> Subject: [App_rpt-users] cop 2 - causing PTT lock
>
> Hi Jim and all;
>
> Running app_rpt v0.287 (full duplex); when I issue a DTMF command to
> re-enable the repeater (from it's disabled cop 3 state), the repeater
> keys up, we hear Alison announce 'RPT ENA' and then the PTT remains
> keyed.  I have to send a '*0' to get the PTT to drop.
>
>
> This is on a system that I just rebuilt recently.  AFAIK, this problem
> did not exist with an earlier version of app_rpt (sorry, I can't be more
> specific than that!).
>
>
> Wonder if this is a bug or something that I am missing from my config
> file, etc?
>
>
> Cheers!
>
> Ramesh.
>
> www.freestar.us
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
>