[App_rpt-users] cop 2 - causing PTT lock

[George Csahanin]

OK, good luck. My node is 2360

GeorgeC
W2DB

----- Original Message ----- 
From: "Ramesh Dhami (VA3UV)" <Ramesh at va3uv.com>
To: "George Csahanin" <george at dyb.com>
Cc: "'app_rpt'" <app_rpt-users at ohnosec.org>
Sent: Sunday, October 30, 2011 11:37 AM
Subject: Re: [App_rpt-users] cop 2 - causing PTT lock


> On 30/10/2011 12:34 PM, George Csahanin wrote:
> 
>> Squelch at 450 and signal 150? Yeah, that's REAL tight. But the 150
>> seems like the audio noise level into the CM108 is possibly too high.
>> I've never seen it that high( backwards to what may be thought...lower
>> signal level number = higher number, as rx quiets with signal that level
>> number goes up)
>>
> 
> <-- I'll try and re-cal' the audio levels this evening.  This is not the 
> final hardware that I'll be using (I'll be installing the dual mode DV / 
> FM repeater on a Kenwood TKR-850).
> 
> R.
>