[App_rpt-users] Parallel port I/O withchan_simpleusb/usbradiounder Limey Linux

[George Csahanin]

And I can confirm, that change did it. I compiled the new source and my test limey box indeed responds to cos on parallel port pins. 

Thanks!!!!!

GeorgeC
W2DB
2360

  ----- Original Message ----- 
  From: Jim Duuuude 
  To: george at dyb.com ; jd0 at broadsci.com ; app_rpt mailing list 
  Sent: Tuesday, August 30, 2011 9:55 PM
  Subject: Re: [App_rpt-users] Parallel port I/O withchan_simpleusb/usbradiounder Limey Linux


  that will be correct *after* I update them into SVN.

  You can follow the upgrade from SVN procedure in the 'support'
  section of the allstarlink.org website.

  JIM



------------------------------------------------------------------------------
  From: george at dyb.com
  To: telesistant at hotmail.com; jd0 at broadsci.com; app_rpt-users at ohnosec.org
  Subject: Re: [App_rpt-users] Parallel port I/O withchan_simpleusb/usbradiounder Limey Linux
  Date: Tue, 30 Aug 2011 21:37:06 -0500


  So...(I'm a hacker, not a programmer)...as I understand this, if I get the new sources into my limey box I can compile them with the new source? 

  I have a slackware linux laptop where I made my own limey one time, and it worked fine (on a D201 board before you folkis combined that with the D945 stuff)

  The ACID distro I downloaded on Saturday has to be right, it works like a champ on the printer port. Also, in the docs it does not mention that pin 11 is available, and I peeked at the source and found that it was, and it did work. The controller I married it to has COS on pin 11, I didn't feel like soldering.

  OK, Jim, thanks for the info/insight.

  GeorgeC
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20110831/bde5c3ed/attachment.html>