[App_rpt-users] dead nodes

[Ken]

two boxes behind a common router need to have different port numbers - have you done that?

you  use the "bindport" parameter in the iax config file.

in the [nodes] stanza you need to specifically mention the new port number as part of the addressing

Ken





-----Original Message-----
From: k8khw <k8khw at att.net>
To: app_rpt-users <app_rpt-users at ohnosec.org>
Sent: Thu, Sep 22, 2011 2:52 am
Subject: [App_rpt-users] dead nodes


Hi Guys
 
  I have a couple Nodes on one box one as a hub
and the other as a regular Node, Radio ect I can log
into the box ok, It boots up fine, I can ping out of the box
ok so it is seeing the internet ok but will not take any 
commands from the Asterisk CLI prompt at all. If I type
any command it simply does nothing. Any ideas on what
could be wrong
 
 
                           Randy 

_______________________________________________
pp_rpt-users mailing list
pp_rpt-users at ohnosec.org
ttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20110922/f87c49a9/attachment.html>