[App_rpt-users] Dtmf passthrough?

[Anthony Percy]

Hi Mars,
Sorry for the delay and thanks for the reply. I thought it may have
been a design feature....!
I will start debugging it....

regards

Anthony, VK2ACP

On Thu, Mar 29, 2012 at 3:47 AM, ALERTradio ERC | N0PCO
<n0pco at alertradio.net> wrote:
>
> Hello Anthony,  here is a link from VoIP-Info that should help some (check
> into inband settings that is mentioned):
>
> http://www.voip-info.org/wiki/view/Asterisk+DTMF
>
> The system that I have here, is working with a separate PBX (that handles
> phone / vmail duties) and RF Gateway (handles radio and paging duties).
> The only time everything was on one server was when we were working with the
> original XIPAR package.   In the long run it is just easier to have two
> separate servers that can communicate with each other.    The inband DTMF
> settings should help to get those commands through to the vmail though.
>
> Mars - N0PCO
> ALERTradio ERC
> www.alertradio.net | www.asteriskradio.net | www.darnsimple.net
> Technology resources for public safety.  It's all about being ready.
>
>
>
> Remember reality sometimes bites, to prevent reality bites quit pulling its
> tale.
>
>
>
>
> On 03/28/2012 06:23 AM, Anthony Percy wrote:
>
> Hi all, no one commented on my message so i have resent it below just  in
> case it was missed....
> Any comments anyone???
>
> Regards
> Anthony, VK2ACP
>
>
> Hi all,
> I have setup voicemail on our Allstar repeater e.g i can call the voicemail
> by doing a *69999 with 9999 being the voicemail. I can hear the voicemail
> menu but none of my dtmf commands are accepted.. I thought that if i used
> the dtmf transmit comand it may work but it still does not work...
> Any ideas on how to pass dtmf to the voicemail?
>
> Regards
> Anthony, VK2ACP
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>