[App_rpt-users] Multiple nodes through one radio connection

[Ken]

The usual way to do this would be to have two nodes and link them.
The second node would not have any hardware configured (it would use a so-called psuedo channel)

GL
Ken


-----Original Message-----
From: Brett Friermood <brett.friermood at gmail.com>
To: app_rpt-users <app_rpt-users at ohnosec.org>
Sent: Mon, Aug 27, 2012 9:29 pm
Subject: [App_rpt-users] Multiple nodes through one radio connection


A hypothetical question:
Can a radio port, either URI or Piconode, be set up to have the
eceive side be associated to one node, while the transmit side is
ssociated with another? I believe a single node can have separate
eceive and transmit ports. But can a single port service two nodes,
ne transmit-only and the other receive only?
This is part of some brainstorming for a multi-operator multi-radio
onsole setup.
Thanks,
rett KQ9N
______________________________________________
pp_rpt-users mailing list
pp_rpt-users at ohnosec.org
ttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20120828/43fb0b19/attachment.html>