[App_rpt-users] GPIO fan control

[Jim Duuuude]

Well, if you *really* want old school, how about an Amperite time delay tube??

If it was good enough for Collins and the like, it should be good enough for ham radio :-).

JIM WB6NIL

> Date: Fri, 27 Jan 2012 15:41:32 +0900
> From: a.errington at lancaster.ac.uk
> To: yokshs at gmail.com
> CC: app_rpt-users at ohnosec.org
> Subject: Re: [App_rpt-users] GPIO fan control
> 
> On Fri, January 27, 2012 12:43, K&R Yoksh wrote:
> > I forgot to mention that I've also had good luck assigning multiple
> > Parallel
> > port pins to PTT in usbradio.conf or simpleusb.conf, such as:
> >
> > pp3 = ptt pp4 = ptt
> >
> > Again, I'd rather not cycle a relay with every PTT. I'd much prefer the
> > fan run for 2 minutes or so after the last PTT, then shut off. That would
> > save a lot of wear and tear on the fan and relay.
> 
> How about a 555 timer IC hooked up to PTT in one-shot mode with a 2 minute
> timer?
> 
> Very old skool, but might do the job.
> 
> 73,
> 
> Andrew
> ZL3AME
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20120126/fdbc2bd0/attachment.html>