[App_rpt-users] CDM/GM300 as Remote Base

[Jeffrey S. Carrier]

I'm planning the same thing Monty.  I just removed the transmitter and
receiver from the RC210 and put them directly on the node.  I still have
the other node connected to the RC210 for channel steering.  It looks
like the parallel GPIO's would be active high so I need to reprogram my
radio.  I'll let you know if I get there before you do.

 

 

73 de K0JSC Jeff

 

 

________________________________

From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Monty
Sent: Tuesday, July 03, 2012 4:06 PM
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] CDM/GM300 as Remote Base

 

Hello Everyone,

 

Has anyone used a Motorola CDM or GM300 as a remote base and used the
GPIOs to control which channel?


Monty

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20120703/5e35626e/attachment.html>