[App_rpt-users] echolink stuff

[KP4TR (Ramon Gonzalez)]

If that were the case, the node numbers would also be incorrect. I didnt put too much attention to this, but ill test again and report exactly the callsigns reported. 


Sent from my iPhone

On Jul 11, 2012, at 4:23 PM, Monty <monty at ke7jvx.com> wrote:

> They are probably connecting through an echolink proxy and it is giving you the proxy's Callsign.
> 
> Monty
> 
> 
> On Wed, Jul 11, 2012 at 1:09 PM, KP4TR (Ramon Gonzalez) <kp4tr.ramon at gmail.com> wrote:
> It reports the wrong callsign. The node connecting or disconnectng from echolink is some off the wall callsign that does not correspond with the node number. But it connects fine.
> 
> Sent from my iPhone
> 
> On Jul 11, 2012, at 3:47 PM, pete M <petem001 at hotmail.com> wrote:
> 
>> What do you mean by incorrect callsing?
>>  
>>  
>> From: KP4TR (Ramon Gonzalez)
>> Sent: Wednesday, July 11, 2012 3:41 PM
>> To: Monty
>> Cc: pete M ; APP RPT
>> Subject: Re: [App_rpt-users] echolink stuff
>>  
>> Ive used this but the incorrect callsign is being reported. I downloaded latest code from svn but problem still there.
>>  
>> 
>> 
>> Sent from my iPhone
>> 
>> On Jul 11, 2012, at 2:50 PM, Monty <monty at ke7jvx.com> wrote:
>> 
>>> It is a setting in /etc/asterisk/rpt.conf:
>>>  
>>> eannmode=3                     ; Default: 1 = Say only node number on echolink connects
>>>                                         ; 2 = say phonetic call sign only on echolink connects
>>>                                         ; 3 = say phonetic call sign and node number on echolink connects
>>>  
>>> 
>>> Monty
>>> 
>>> 
>>> On Wed, Jul 11, 2012 at 11:22 AM, pete M <petem001 at hotmail.com> wrote:
>>> Is there a way for a node to specify the call sign rather then the node number whe they connect from echolink? ( I am using the acid distro)
>>>  
>>> If someone connect by the portal we can hear that ve2xx conected, but from the echolink we will hear node 12345 connected..
>>>  
>>> And where can I write information, like on echolink, that describe the repeater and stuff..
>>>  
>>> And finally is there a how to for the echolink part, did not found much..
>>>  
>>> Pierre
>>> VE2PF
>>>  
>>>  
>>>  
>>>  
>>> 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> 
>>>  
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>>  
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20120711/42798634/attachment.html>