[App_rpt-users] LOX and CAT 1000 Interfacing

[Monty]

Hi Bobby,

Should be like your first example.  The Goesinta to the Goesouta, and the
Goesouta to the Goesinta.  Might have a problem if it is looking for CTCSS,
I would program the controller in Carrier Squelch (COR Only) and same with
the LOX and Beagle.

Monty


On Wed, Jul 18, 2012 at 6:36 AM, Bobby Lacey <kf4gta at amsat.org> wrote:

> Hi,
>
> I just received my lox and beagle board a few weeks ago and I'm trying to
> interface it with the remote base port on our CAT 1000. I'm interfacing the
> LOX DB9 with the CAT 1000 DB9, but I'm not sure if I have the pinout done
> correctly or not.
>
> Should the pinout be:
>
> LOX <> CAT 1000
>
> GND <> GND
> CTCSS <> CTCSS
> PTT <> COR
> AUDIO OUT <> AUDIO IN
> AUDIO IN <> AUDIO OUT
> COR <> PTT
>
>
> or should the pinout be 1:1, ie:
>
> GND <> GND
> CTCSS <> CTCSS
> PTT <> PTT
> AUDIO OUT <> AUDIO OUT
> AUDIO IN <> AUDIO IN
> COR <> COR
>
>
> To interface the two boards, I'm using a DB9 to RJ45 on both ends and a
> straight through cat5 to connect the two.
>
> Thanks for any help!
>
> 73
> Bobby
> KF4GTA
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20120718/644ca799/attachment.html>