[App_rpt-users] Zoiper Android and Acid

[Ed Wilhelm]

Thanks for the info.

I must be doing something very stupid. Can not get Zoiper to register, 
get error:

NOTICE[2761]: chan_iax2.c:6839 register_verify: No registration for peer 
"xyz"

This occurs both over the 3G network or my local WLAN.

i have IAXRPT working fine.

Any ideas?

Ed W8VT
Node 27849


On 07/17/2012 12:29 PM, DARN SIMPLE | N0PCO wrote:
> Hello Ed, Zoiper should be fairly easy to get set up on Android, 
> you'll just need to add the extension information for your RF Gateway 
> once you have things set up and ready to go.
>
> For a quick reference take a look at: 
> http://scripts.asteriskradio.net   follow Scripts and Things - RF 
> Gateways ... there's a link for the PBX 2 RF Gateway Guide. Towards 
> the end of the document it talks about "RF Gateway to SIP Phone" the 
> same procedures can be done with IAX (just add the information to the 
> /etc/asterisk/iax.conf file instead of the /etc/asterisk/sip.conf file).
>
>
> Mars - N0PCO
> ALERTradio ERC
> www.alertradio.net | www.asteriskradio.net | www.darnsimple.net
> Technology resources for public safety.  It's all about being ready.
>
> ALN: 2095 KC0SOK UHF 443.275+ 156.7
>
>
>
>
>
>
>
> On 07/17/2012 09:06 AM, Ed Wilhelm wrote:
>> Looking for information on configuring Zoiper on Android and app_rpt 
>> on Acid distro. Found some stuff on the Xipar distro but don't know 
>> how much difference there is between them. Any assistance greatly 
>> appreciated.
>>
>> Ed W8VT
>> Node 27849
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>