From adamson_alan at hotmail.com Fri Jun 1 02:47:26 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Thu, 31 May 2012 22:47:26 -0400 Subject: [App_rpt-users] Looking for a hardwired rpt.conf section Message-ID: I want to create a completely tone(s) less connection on a uri. It's a hardwired connection that I don't want ID's, announcements, hangtime, CT's etc. Besides using the duplex=0, what else do I need to do to turn all of that off on that node? If you have rpt.conf section that you could share it would be appreciated. Thanks Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From tim.sawyer at me.com Fri Jun 1 04:19:33 2012 From: tim.sawyer at me.com (Tim Sawyer) Date: Thu, 31 May 2012 21:19:33 -0700 Subject: [App_rpt-users] Looking for a hardwired rpt.conf section In-Reply-To: References: Message-ID: <622C70FE-5D20-4303-8343-0A0155F13678@me.com> duplex = 0 ; Half duplex with no telemetry, courtesy tones or hang time linktolink = yes ; in case whatever you're hooking to likes full duplex ; these attempt to kill IDs but I have no idea if they would work. experiment! totime=0 idrecording=|i idtalkover=|i Can't think of anything else you have to stop at the moment. Maybe others will chime in. -- Tim :wq On May 31, 2012, at 7:47 PM, Alan Adamson wrote: > I want to create a completely tone(s) less connection on a uri. It?s a hardwired connection that I don't want ID's, announcements, hangtime, CT's etc? Besides using the duplex=0, what else do I need to do to turn all of that off on that node? > > If you have rpt.conf section that you could share it would be appreciated. > > > Thanks > > Alan > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From kc9gqr at gmail.com Fri Jun 1 05:01:09 2012 From: kc9gqr at gmail.com (Bradley Haney) Date: Fri, 1 Jun 2012 00:01:09 -0500 Subject: [App_rpt-users] NO audio through web transceiver Message-ID: <6B2C83C4-44A1-4991-83EE-2B49F546808A@gmail.com> Hello all. Got a odd one here.. not sure what happened but i do not get any audio from the node to my web transceiver. I get audio when i test it coming to my echo link node on my iPhone, but nothing through the web trans. I can TX on the web trans at it works fine but no rx. any thought? Bradley From njgarbenis at gmail.com Fri Jun 1 11:51:59 2012 From: njgarbenis at gmail.com (Neal Garbenis) Date: Fri, 1 Jun 2012 07:51:59 -0400 Subject: [App_rpt-users] Looking for a hardwired rpt.conf section In-Reply-To: <622C70FE-5D20-4303-8343-0A0155F13678@me.com> References: <622C70FE-5D20-4303-8343-0A0155F13678@me.com> Message-ID: If you don't want to here the connect and disconnect messages you'll need to turn telemetry off. If I recall you can do that with a cop command Neal Garbenis Jr. NG8Y On Jun 1, 2012, at 12:19 AM, Tim Sawyer wrote: > duplex = 0 ; Half duplex with no telemetry, courtesy tones or hang time > linktolink = yes ; in case whatever you're hooking to likes full duplex > > ; these attempt to kill IDs but I have no idea if they would work. experiment! > totime=0 > idrecording=|i > idtalkover=|i > > Can't think of anything else you have to stop at the moment. Maybe others will chime in. > -- > Tim > :wq > > On May 31, 2012, at 7:47 PM, Alan Adamson wrote: > >> I want to create a completely tone(s) less connection on a uri. It?s a hardwired connection that I don't want ID's, announcements, hangtime, CT's etc? Besides using the duplex=0, what else do I need to do to turn all of that off on that node? >> >> If you have rpt.conf section that you could share it would be appreciated. >> >> >> Thanks >> >> Alan >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From adamson_alan at hotmail.com Fri Jun 1 13:26:48 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Fri, 1 Jun 2012 09:26:48 -0400 Subject: [App_rpt-users] Looking for a hardwired rpt.conf section In-Reply-To: <07a001cd3fae$1e808150$5b8183f0$@me.com> References: <07a001cd3fae$1e808150$5b8183f0$@me.com> Message-ID: FYI Setting the |I values to not have a callsign will crash the asterisk app as quick as you press the transmit button the first time, Settiong totime to 0 will lock out the channel completely with a timeout message that happens immediate upon startup Just figured I'd try these and pass along the info. So far the telemdefault = 0 is the best approach. Alan From: Tim Sawyer [mailto:tim.sawyer at me.com] Sent: Friday, June 01, 2012 12:20 AM To: Alan Adamson Cc: App_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] Looking for a hardwired rpt.conf section duplex = 0 ; Half duplex with no telemetry, courtesy tones or hang time linktolink = yes ; in case whatever you're hooking to likes full duplex ; these attempt to kill IDs but I have no idea if they would work. experiment! totime=0 idrecording=|i idtalkover=|i Can't think of anything else you have to stop at the moment. Maybe others will chime in. -- Tim :wq On May 31, 2012, at 7:47 PM, Alan Adamson wrote: I want to create a completely tone(s) less connection on a uri. It's a hardwired connection that I don't want ID's, announcements, hangtime, CT's etc. Besides using the duplex=0, what else do I need to do to turn all of that off on that node? If you have rpt.conf section that you could share it would be appreciated. Thanks Alan _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From adamson_alan at hotmail.com Fri Jun 1 14:12:10 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Fri, 1 Jun 2012 10:12:10 -0400 Subject: [App_rpt-users] My new challenge Message-ID: Ok, this can't be as hard as it appears. How on earth can you pass dtmf through once you are linked to a node? Scenario User connects to node A, node A is connected to a box that wants DTMF to control it. User A wants to go into some form of *mode*, where they can enter DTMF from a mic keypad and have it sent (not mutted) to the box connected on node A. I at first thought it was command mode, but no, that just sends the command sequences (not dtmf) in the software to deal with remote commanding. I want to send live DTMF. Another option, is perhaps there is a way to not mute DTMF on a node stanza basis? Thanks, Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From adamson_alan at hotmail.com Fri Jun 1 16:01:06 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Fri, 1 Jun 2012 12:01:06 -0400 Subject: [App_rpt-users] RTCM - current draw? Message-ID: Anyone happen to know the specs on the RTCM? How much current does it require? Thanks, Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From monty at ke7jvx.com Fri Jun 1 16:41:28 2012 From: monty at ke7jvx.com (Monty) Date: Fri, 1 Jun 2012 09:41:28 -0700 Subject: [App_rpt-users] My new challenge In-Reply-To: References: Message-ID: http://ohnosec.org/drupal/node/134 Monty On Fri, Jun 1, 2012 at 7:12 AM, Alan Adamson wrote: > ** > > Ok, this can't be as hard as it appears? How on earth can you pass dtmf > through once you are linked to a node? > > Scenario > > User connects to node A, node A is connected to a box that wants DTMF to > control it. User A wants to go into some form of *mode*, where they can > enter DTMF from a mic keypad and have it sent (not mutted) to the box > connected on node A? > > I at first thought it was command mode, but no, that just sends the > command sequences (not dtmf) in the software to deal with remote commanding? > I want to send live DTMF. > > Another option, is perhaps there is a way to not mute DTMF on a node > stanza basis? > > Thanks, > > Alan > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From yokshs at gmail.com Fri Jun 1 22:51:36 2012 From: yokshs at gmail.com (K&R Yoksh) Date: Fri, 1 Jun 2012 17:51:36 -0500 Subject: [App_rpt-users] NO audio through web transceiver Message-ID: <3DFFA55A5EF84929BC4E2BBBBF14E960@main> Hello Bradley,Might be a problem with the Web Transceiver itself. I can't seem to connect to anyone at the moment.73Kyle K0KN--- Original Message ---Hello all. Got a odd one here.. not sure what happened but i do not get any audio from the node to my web transceiver. I get audio when i test it coming to my echo link node on my iPhone, but nothing through the web trans. I canTX on the web trans at it works fine but no rx. any thought? Bradley From ke2n at cs.com Fri Jun 1 23:50:51 2012 From: ke2n at cs.com (Ken) Date: Fri, 1 Jun 2012 19:50:51 -0400 Subject: [App_rpt-users] My new challenge In-Reply-To: References: Message-ID: <00bb01cd4051$60511e70$20f35b50$@cs.com> See http://ohnosec.org/drupal/node/134 propagate_dtmf= Ken From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Monty Sent: Friday, June 01, 2012 12:41 PM To: Alan Adamson Cc: App_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] My new challenge http://ohnosec.org/drupal/node/134 Monty On Fri, Jun 1, 2012 at 7:12 AM, Alan Adamson wrote: Ok, this can't be as hard as it appears. How on earth can you pass dtmf through once you are linked to a node? Scenario User connects to node A, node A is connected to a box that wants DTMF to control it. User A wants to go into some form of *mode*, where they can enter DTMF from a mic keypad and have it sent (not mutted) to the box connected on node A. I at first thought it was command mode, but no, that just sends the command sequences (not dtmf) in the software to deal with remote commanding. I want to send live DTMF. Another option, is perhaps there is a way to not mute DTMF on a node stanza basis? Thanks, Alan _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From jay at unixwolf.net Sat Jun 2 03:50:53 2012 From: jay at unixwolf.net (Jay Urish) Date: Fri, 01 Jun 2012 22:50:53 -0500 Subject: [App_rpt-users] USB Hubs Message-ID: <4FC98D9D.7010103@unixwolf.net> Folks, I will be running a panasonic CF-29 Mk4 for my server at the repeater site. The issue is lack of USB ports. Is anybody running a hub successfully and if so, which make / model? Jay, W5GM From adamson_alan at hotmail.com Sat Jun 2 03:58:45 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Fri, 1 Jun 2012 23:58:45 -0400 Subject: [App_rpt-users] RTCM question Message-ID: Got my RTCM working as I'd like. but had a question. It will be up at repeater site, one that has its own internet connectivity. That internet is *NOT* on my lan, it's on the public internet. I understand that I need to poke a hole in my firewall for the rtcm udp port, but does the repeater site also need a hole poked in its (I'm not 100% sure if it's natted or not, but suspect it is. The docs just mention the *server* needs, but it suggests that the RTCM does *not* need any specific incoming port access. Figured I'd check with those that may know. Thanks in advance, Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From telesistant at hotmail.com Sat Jun 2 04:01:49 2012 From: telesistant at hotmail.com (Jim Duuuude) Date: Fri, 1 Jun 2012 21:01:49 -0700 Subject: [App_rpt-users] USB Hubs In-Reply-To: <4FC98D9D.7010103@unixwolf.net> References: <4FC98D9D.7010103@unixwolf.net> Message-ID: You will have nothing but problems with a USB hub. If you can keep the kernel from randomly (or even worse predictably) crashing, you will find that the performance even with a multiple-TT hub is horrific. chan_simpleusb seems to cause way less problems, but still is VERY problematic. Its a Linux issue. JIM > Date: Fri, 1 Jun 2012 22:50:53 -0500 > From: jay at unixwolf.net > To: app_rpt-users at ohnosec.org > Subject: [App_rpt-users] USB Hubs > > Folks, > I will be running a panasonic CF-29 Mk4 for my server at the repeater > site. The issue is lack of USB ports. > > Is anybody running a hub successfully and if so, which make / model? > > Jay, W5GM > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From telesistant at hotmail.com Sat Jun 2 04:03:25 2012 From: telesistant at hotmail.com (Jim Duuuude) Date: Fri, 1 Jun 2012 21:03:25 -0700 Subject: [App_rpt-users] RTCM question In-Reply-To: References: Message-ID: The RTCM requires no ports to be forwarded. If you can "surf" from the internet that you plug the RTCM into, then you can talk from it too. JIM WB6NIL From: adamson_alan at hotmail.com To: App_rpt-users at ohnosec.org Date: Fri, 1 Jun 2012 23:58:45 -0400 Subject: [App_rpt-users] RTCM question RTCM question Got my RTCM working as I'd like? but had a question? It will be up at repeater site, one that has its own internet connectivity. That internet is *NOT* on my lan, it's on the public internet. I understand that I need to poke a hole in my firewall for the rtcm udp port, but does the repeater site also need a hole poked in its (I'm not 100% sure if it's natted or not, but suspect it is? The docs just mention the *server* needs, but it suggests that the RTCM does *not* need any specific incoming port access? Figured I'd check with those that may know. Thanks in advance, Alan _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From adamson_alan at hotmail.com Sat Jun 2 04:17:48 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Sat, 2 Jun 2012 00:17:48 -0400 Subject: [App_rpt-users] RTCM question In-Reply-To: <001f01cd4075$5fe1fe90$1fa5fbb0$@hotmail.com> References: <001f01cd4075$5fe1fe90$1fa5fbb0$@hotmail.com> Message-ID: Thanks Jim.. hoping to have all this in *service* next week. Levels still need a tweak or two. I complicated things a bunch because the repeater is a new Icom IDas digital NXDN repeater, but it's running in hybrid mode with 25khz analog and 6.25khz digital. For now the Allstar side via the RTCM will be connected via analog, but at some point, I hope to move it to the digital side, not to do anything with the digital bitstream, more because the range of the repeater is so much greater when in digital, audio will still come out to the allstar side via analog, but decoded from digital when I get to that stage (course I have no idea if DTMF will decode when I get there or not :).) Alan From: Jim Duuuude [mailto:telesistant at hotmail.com] Sent: Saturday, June 02, 2012 12:03 AM To: adamson_alan at hotmail.com; app_rpt mailing list Subject: RE: [App_rpt-users] RTCM question The RTCM requires no ports to be forwarded. If you can "surf" from the internet that you plug the RTCM into, then you can talk from it too. JIM WB6NIL _____ From: adamson_alan at hotmail.com To: App_rpt-users at ohnosec.org Date: Fri, 1 Jun 2012 23:58:45 -0400 Subject: [App_rpt-users] RTCM question Got my RTCM working as I'd like. but had a question. It will be up at repeater site, one that has its own internet connectivity. That internet is *NOT* on my lan, it's on the public internet. I understand that I need to poke a hole in my firewall for the rtcm udp port, but does the repeater site also need a hole poked in its (I'm not 100% sure if it's natted or not, but suspect it is. The docs just mention the *server* needs, but it suggests that the RTCM does *not* need any specific incoming port access. Figured I'd check with those that may know. Thanks in advance, Alan _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From adamson_alan at hotmail.com Sat Jun 2 18:16:11 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Sat, 2 Jun 2012 14:16:11 -0400 Subject: [App_rpt-users] Hmm, did I just fine another bug? Message-ID: So I have a node that I can connect to another node on the same box. This is a hardwired connection so I have telemdefault=0 set on it. I was testing time outs and found what appears to be an issue, but then again, maybe not if I set the time out value on node A to something really short. say 5 seconds. When I have node A connected to Node B (the hardwired node), if I transmit on node A for more than 5 seconds, I get the timeout message and then the transmitter shuts off.. HOWEVER, the linked node keeps transmitting and follows the PTT of the transmitter that caused the timeout. Now what I'm about to go test is that I'll be that the above is by design and what will time out the node B is when it's totimer expires.. Did I find an issue or is it working as designed and the 2 TO timers are totally independent of one another (as they should be), but also connected to the originating cause - meaning the tx that is held keydown for longer than node A's timer but still holds node B in a PTT state? Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From w6reb at hammradio.us Sat Jun 2 20:09:08 2012 From: w6reb at hammradio.us (w6reb) Date: Sat, 2 Jun 2012 13:09:08 -0700 Subject: [App_rpt-users] command mode Message-ID: <589E7838B28A4C2B9B2173BDFDBB0DA2@BobPC> How do you change the command mode to something other than *4 ? Commented it out but still works, so there?s something somewhere else that directs this to *4 other than in the rpt.conf stanza. I?ve got someone that likes to play around. -------------- next part -------------- An HTML attachment was scrubbed... URL: From tim.sawyer at me.com Sat Jun 2 22:51:31 2012 From: tim.sawyer at me.com (Tim Sawyer) Date: Sat, 02 Jun 2012 15:51:31 -0700 Subject: [App_rpt-users] Hmm, did I just fine another bug? In-Reply-To: References: Message-ID: Uhh? That's not making any sense. Did you hard wire to Allstar nodes together? -- Tim :wq On Jun 2, 2012, at 11:16 AM, Alan Adamson wrote: > So I have a node that I can connect to another node on the same box. This is a hardwired connection so I have telemdefault=0 set on it. > > I was testing time outs and found what appears to be an issue, but then again, maybe not > > if I set the time out value on node A to something really short? say 5 seconds. When I have node A connected to Node B (the hardwired node), if I transmit on node A for more than 5 seconds, I get the timeout message and then the transmitter shuts off?. HOWEVER, the linked node keeps transmitting and follows the PTT of the transmitter that caused the timeout. > > > Now what I'm about to go test is that I'll be that the above is by design and what will time out the node B is when it's totimer expires?. > > Did I find an issue or is it working as designed and the 2 TO timers are totally independent of one another (as they should be), but also connected to the originating cause - meaning the tx that is held keydown for longer than node A's timer but still holds node B in a PTT state? > > > Alan > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From adamson_alan at hotmail.com Sun Jun 3 14:02:31 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Sun, 3 Jun 2012 10:02:31 -0400 Subject: [App_rpt-users] Thinking out loud Message-ID: I've been wanting to build a *mobile* node. On the surface, this seems pretty easy. What makes it complicated is the internet or network connections. I'm a tmobile subscriber for cell and mobile data. I decided recently to start building my mobile data carry alongs based upon a cradlepoint router, so far so good. So my Tmobile mobile device is comprised of a cradlepoint, and their 4G usb FOB. This works great for what I need it for.. Recently I found myself in an area where I didn't have very good tmo coverage so I grabbed a Verizon 4G lte FOB. I haven't thought about *incoming* data until working on my linking projects. This is where my mobile plan fell apart. It appears that most all of these 4G/LTE providers are going to a Natted private network on the 4G/LTE side. This isn't true of their 3G network, but is of their 4G side. Well as you might imagine if you don't have control of the NAT ad port forwarding, you can't put a server on user side of a 4G device :(. BUT then I had an epiphany (probably late because everyone else is already there). The RTCM works so well for remoting my repeater.. Why not just use it as the mobile controller and instead of running a server remotely, just run an RTCM remotely back to a server. I think this will solve my problem. And perhaps make this even simpler to deal with along with a 4G type data connection. Anyone already wandered this path and what are you using? Thanks, Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From kc9gqr at gmail.com Sun Jun 3 14:29:00 2012 From: kc9gqr at gmail.com (Bradley Haney) Date: Sun, 3 Jun 2012 09:29:00 -0500 Subject: [App_rpt-users] Hooking URI to accessory port of Yaesu vx7000 Message-ID: I have got some good info from the group on pin outs on the DB25 side of a vx 5000 repeater, I know mine is a 7000 but close but I am having a little trouble on what should i set the URI up to.. not sure if it shoudl be duplex 3 or 2, 1, or 0.. The allstarbox i do NOT want to be doing the repeat functions so i am adding this to the repeater as the add on. so that way if the box crashes the repeater just keeps working. By Chance does anyone have a good set up USBRADIO.CONF file they would like to share how they connected to a yaesu repeater ? Thanks bradley From telesistant at hotmail.com Sun Jun 3 15:46:30 2012 From: telesistant at hotmail.com (Jim Duuuude) Date: Sun, 3 Jun 2012 08:46:30 -0700 Subject: [App_rpt-users] Hooking URI to accessory port of Yaesu vx7000 In-Reply-To: References: Message-ID: duplex = 0 linktolink = yes Jim WB6NIL > Date: Sun, 3 Jun 2012 09:29:00 -0500 > From: kc9gqr at gmail.com > To: app_rpt-users at ohnosec.org > Subject: [App_rpt-users] Hooking URI to accessory port of Yaesu vx7000 > > I have got some good info from the group on pin outs on the DB25 side > of a vx 5000 repeater, I know mine is a 7000 but close but I am > having a little trouble on what should i set the URI up to.. not sure > if it shoudl be duplex 3 or 2, 1, or 0.. The allstarbox i do NOT > want to be doing the repeat functions so i am adding this to the > repeater as the add on. so that way if the box crashes the repeater > just keeps working. By Chance does anyone have a good set up > USBRADIO.CONF file they would like to share how they connected to a > yaesu repeater ? > > Thanks > > bradley > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From telesistant at hotmail.com Sun Jun 3 16:13:45 2012 From: telesistant at hotmail.com (Jim Duuuude) Date: Sun, 3 Jun 2012 09:13:45 -0700 Subject: [App_rpt-users] Thinking out loud In-Reply-To: References: Message-ID: well, yes, that was exactly one of the things it was designed for... On the way to Dayton recently, we (Mark K7IZA, Hans AE6TV and I) had exactly that.. An RTCM connected to a cradlepoint router with a T-mobile USB datacard and a Motorola HT on a 440 channel. It worked very well. And for this type of an application, if you REALLY want a "no brainer" setup, Micro-Node offers a subscription-based hosting platform for Allstar Nodes using an RTCM in this manner. In other words, for people who just want a simple, hassle-free mobile/portable node without having to "hassle" with a Linux host, etc, they can also buy the service through Mark's company. Regardless of how you host the node, having the RTCM in a mobile/portable environment is a GREAT way to go. Its low power consumption (72ma @ 12VDC), small size, and general ruggedness, not to mention its very simple requirements for Internet connectivity (including its ability to be behind any number of NATs, etc) make it the optimum solution for this type of operation. I highly recommend you giving this a try. You will definitely like it. BTW, I am in the process of getting access to a picture of the device we took with us to Dayton, and will post it once I get it. JIM WB6NIL From: adamson_alan at hotmail.com To: app_rpt-users at ohnosec.org Date: Sun, 3 Jun 2012 10:02:31 -0400 Subject: [App_rpt-users] Thinking out loud Thinking out loud I've been wanting to build a *mobile* node. On the surface, this seems pretty easy? What makes it complicated is the internet or network connections. I'm a tmobile subscriber for cell and mobile data. I decided recently to start building my mobile data carry alongs based upon a cradlepoint router, so far so good. So my Tmobile mobile device is comprised of a cradlepoint, and their 4G usb FOB. This works great for what I need it for?. Recently I found myself in an area where I didn't have very good tmo coverage so I grabbed a Verizon 4G lte FOB. I haven't thought about *incoming* data until working on my linking projects. This is where my mobile plan fell apart. It appears that most all of these 4G/LTE providers are going to a Natted private network on the 4G/LTE side. This isn't true of their 3G network, but is of their 4G side. Well as you might imagine if you don't have control of the NAT ad port forwarding, you can't put a server on user side of a 4G device :(. BUT then I had an epiphany (probably late because everyone else is already there)? The RTCM works so well for remoting my repeater?. Why not just use it as the mobile controller and instead of running a server remotely, just run an RTCM remotely back to a server. I think this will solve my problem. And perhaps make this even simpler to deal with along with a 4G type data connection. Anyone already wandered this path and what are you using? Thanks, Alan _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From adamson_alan at hotmail.com Sun Jun 3 19:26:06 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Sun, 3 Jun 2012 15:26:06 -0400 Subject: [App_rpt-users] RTCM falsing DTMF Message-ID: ok, so is it normal for the RTCM to get false DTMF when voice is doing over the link? I adjusted the RX audio so that the 2 lights were off with a 3khz tone generated from a service monitor. I see oh between 6-8 DTMF's detected over the voter channel during use.. How do you fix that issue? Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From telesistant at hotmail.com Sun Jun 3 19:48:17 2012 From: telesistant at hotmail.com (Jim Duuuude) Date: Sun, 3 Jun 2012 12:48:17 -0700 Subject: [App_rpt-users] RTCM falsing DTMF In-Reply-To: References: Message-ID: This has nothing to do with the RTCM. The DTMF receiver is the same one that is used in all the other channel drivers for the other types of interfaces also. When the app_rpt stuff was first being developed (10+ years ago), the default parameters for the DTMF receiver seemed too "tight" for radio use. There were a number of combinations that were found of receivers and transmitting devices (HT's mobiles, etc) that did not seem to work reliably with the parameters the way they were, so we developed the "RADIO_RELAX" set of parameters, which are more "relaxed" then the normal ones. As time has gone on, there have been cases where using these "relaxed" parameters have seemed to do more harm then good. I dont know if your case is one of those. If you wish to try, I suggest re-compiling Asterisk with the RADIO_RELAX compile parameter turned off, and see if you like it that way better. I can guarantee you that you will have less "falsing" if you do that. What I can not guarantee is that you will get all the "real" digits decoded reliably (if you do that). Jim WB6NIL From: adamson_alan at hotmail.com To: app_rpt-users at ohnosec.org Date: Sun, 3 Jun 2012 15:26:06 -0400 Subject: [App_rpt-users] RTCM falsing DTMF RTCM falsing DTMF ok, so is it normal for the RTCM to get false DTMF when voice is doing over the link? I adjusted the RX audio so that the 2 lights were off with a 3khz tone generated from a service monitor. I see oh between 6-8 DTMF's detected over the voter channel during use?. How do you fix that issue? Alan _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From tim.sawyer at me.com Sun Jun 3 20:51:15 2012 From: tim.sawyer at me.com (Tim Sawyer) Date: Sun, 03 Jun 2012 13:51:15 -0700 Subject: [App_rpt-users] RTCM falsing DTMF In-Reply-To: References: Message-ID: <7C76EA27-4415-4796-97CD-7B92F1169BA5@me.com> I am one of those that found setting RADIO_RELAX off works much better. TT falsing has been reduced to near zero and decoding is still as fast as I can push the buttons. One thing I found was that I had to turn on the PL filter. Before I did that TT decoding was unbearably show with RADIO_RELAX off. -- Tim :wq On Jun 3, 2012, at 12:48 PM, Jim Duuuude wrote: > This has nothing to do with the RTCM. The DTMF receiver is the same one that is used in all the other > channel drivers for the other types of interfaces also. > > When the app_rpt stuff was first being developed (10+ years ago), the default parameters > for the DTMF receiver seemed too "tight" for radio use. There were a number of combinations > that were found of receivers and transmitting devices (HT's mobiles, etc) that did not seem to > work reliably with the parameters the way they were, so we developed the "RADIO_RELAX" set > of parameters, which are more "relaxed" then the normal ones. > > As time has gone on, there have been cases where using these "relaxed" parameters have seemed > to do more harm then good. I dont know if your case is one of those. If you wish to try, I suggest > re-compiling Asterisk with the RADIO_RELAX compile parameter turned off, and see if you like it > that way better. I can guarantee you that you will have less "falsing" if you do that. What I can not > guarantee is that you will get all the "real" digits decoded reliably (if you do that). > > Jim WB6NIL > > From: adamson_alan at hotmail.com > To: app_rpt-users at ohnosec.org > Date: Sun, 3 Jun 2012 15:26:06 -0400 > Subject: [App_rpt-users] RTCM falsing DTMF > > ok, so is it normal for the RTCM to get false DTMF when voice is doing over the link? I adjusted the RX audio so that the 2 lights were off with a 3khz tone generated from a service monitor. > I see oh between 6-8 DTMF's detected over the voter channel during use?. How do you fix that issue? > Alan > > _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From ke6sth at ke6sth.ampr.org Sun Jun 3 20:53:45 2012 From: ke6sth at ke6sth.ampr.org (Sione Ragle) Date: Sun, 03 Jun 2012 13:53:45 -0700 Subject: [App_rpt-users] RTCM falsing DTMF In-Reply-To: <7C76EA27-4415-4796-97CD-7B92F1169BA5@me.com> References: <7C76EA27-4415-4796-97CD-7B92F1169BA5@me.com> Message-ID: <4FCBCED9.4080806@ke6sth.ampr.org> How we go about making this change? I have been having this issue at all my sites. On 6/3/2012 1:51 PM, Tim Sawyer wrote: > I am one of those that found setting RADIO_RELAX off works much > better. TT falsing has been reduced to near zero and decoding is still > as fast as I can push the buttons. > > One thing I found was that I had to turn on the PL filter. Before I > did that TT decoding was unbearably show with RADIO_RELAX off. > -- > Tim > :wq > > On Jun 3, 2012, at 12:48 PM, Jim Duuuude wrote: > >> This has nothing to do with the RTCM. The DTMF receiver is the same >> one that is used in all the other >> channel drivers for the other types of interfaces also. >> >> When the app_rpt stuff was first being developed (10+ years ago), the >> default parameters >> for the DTMF receiver seemed too "tight" for radio use. There were a >> number of combinations >> that were found of receivers and transmitting devices (HT's mobiles, >> etc) that did not seem to >> work reliably with the parameters the way they were, so we developed >> the "RADIO_RELAX" set >> of parameters, which are more "relaxed" then the normal ones. >> >> As time has gone on, there have been cases where using these >> "relaxed" parameters have seemed >> to do more harm then good. I dont know if your case is one of those. >> If you wish to try, I suggest >> re-compiling Asterisk with the RADIO_RELAX compile parameter turned >> off, and see if you like it >> that way better. I can guarantee you that you will have less >> "falsing" if you do that. What I can not >> guarantee is that you will get all the "real" digits decoded reliably >> (if you do that). >> >> Jim WB6NIL >> >> ------------------------------------------------------------------------ >> From: adamson_alan at hotmail.com >> To: app_rpt-users at ohnosec.org >> Date: Sun, 3 Jun 2012 15:26:06 -0400 >> Subject: [App_rpt-users] RTCM falsing DTMF >> >> ok, so is it normal for the RTCM to get false DTMF when voice is >> doing over the link? I adjusted the RX audio so that the 2lightswere >> off with a 3khz tone generated from a service monitor. >> >> I see oh between 6-8 DTMF's detected over the voter channel during >> use.... How do you fix that issue? >> Alan >> >> _______________________________________________ App_rpt-users mailing >> list App_rpt-users at ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From tim.sawyer at me.com Sun Jun 3 21:01:25 2012 From: tim.sawyer at me.com (Tim Sawyer) Date: Sun, 03 Jun 2012 14:01:25 -0700 Subject: [App_rpt-users] RTCM falsing DTMF In-Reply-To: <7C76EA27-4415-4796-97CD-7B92F1169BA5@me.com> References: <7C76EA27-4415-4796-97CD-7B92F1169BA5@me.com> Message-ID: First I would update from svn, might as well as you have to recompile anyway. The instructions to update from svn are at https://allstarlink.org/support.html#astupgrade Before you do the make up grade edit /usr/src/astsrc/asterisk/menuselect.makeopts change the line that says MENUSELECT_CFLAGS=RADIO_RELAX LOADABLE_MODULES to MENUSELECT_CFLAGS=LOADABLE_MODULES then do make upgrade or make upgrade-acid as appropriate. -- Tim :wq On Jun 3, 2012, at 1:51 PM, Tim Sawyer wrote: > I am one of those that found setting RADIO_RELAX off works much better. TT falsing has been reduced to near zero and decoding is still as fast as I can push the buttons. > > One thing I found was that I had to turn on the PL filter. Before I did that TT decoding was unbearably show with RADIO_RELAX off. > -- > Tim > :wq > > On Jun 3, 2012, at 12:48 PM, Jim Duuuude wrote: > >> This has nothing to do with the RTCM. The DTMF receiver is the same one that is used in all the other >> channel drivers for the other types of interfaces also. >> >> When the app_rpt stuff was first being developed (10+ years ago), the default parameters >> for the DTMF receiver seemed too "tight" for radio use. There were a number of combinations >> that were found of receivers and transmitting devices (HT's mobiles, etc) that did not seem to >> work reliably with the parameters the way they were, so we developed the "RADIO_RELAX" set >> of parameters, which are more "relaxed" then the normal ones. >> >> As time has gone on, there have been cases where using these "relaxed" parameters have seemed >> to do more harm then good. I dont know if your case is one of those. If you wish to try, I suggest >> re-compiling Asterisk with the RADIO_RELAX compile parameter turned off, and see if you like it >> that way better. I can guarantee you that you will have less "falsing" if you do that. What I can not >> guarantee is that you will get all the "real" digits decoded reliably (if you do that). >> >> Jim WB6NIL >> >> From: adamson_alan at hotmail.com >> To: app_rpt-users at ohnosec.org >> Date: Sun, 3 Jun 2012 15:26:06 -0400 >> Subject: [App_rpt-users] RTCM falsing DTMF >> >> ok, so is it normal for the RTCM to get false DTMF when voice is doing over the link? I adjusted the RX audio so that the 2 lights were off with a 3khz tone generated from a service monitor. >> I see oh between 6-8 DTMF's detected over the voter channel during use?. How do you fix that issue? >> Alan >> >> _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From k5try73 at gmail.com Sun Jun 3 21:35:31 2012 From: k5try73 at gmail.com (Tony Youngblood) Date: Sun, 3 Jun 2012 16:35:31 -0500 Subject: [App_rpt-users] Thinking out loud In-Reply-To: References: Message-ID: <928FACFA-D2DE-4780-BC84-FD741A24AE15@gmail.com> Kewl! Just my future my plans with my rtcm too, I wanting to get it portable. Look forward to the pic. And any further insight on mark's subscription based hosting platform? Last I heard it was still prototype not available? Price? Patiently waiting to see what all is entailed ... 73 sir! Tony ;(;) AllStar 28384 Irlp 7998 / 7766 / 7926 Echo 563329 / 685499 / 722517 :(:) On Jun 3, 2012, at 3:51 PM, app_rpt-users-request at ohnosec.org wrote: > Send App_rpt-users mailing list submissions to > app_rpt-users at ohnosec.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > or, via email, send a message with subject or body 'help' to > app_rpt-users-request at ohnosec.org > > You can reach the person managing the list at > app_rpt-users-owner at ohnosec.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of App_rpt-users digest..." > > > Today's Topics: > > 1. Re: Thinking out loud (Jim Duuuude) > 2. RTCM falsing DTMF (Alan Adamson) > 3. Re: RTCM falsing DTMF (Jim Duuuude) > 4. Re: RTCM falsing DTMF (Tim Sawyer) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 3 Jun 2012 09:13:45 -0700 > From: Jim Duuuude > To: , app_rpt mailing list > > Subject: Re: [App_rpt-users] Thinking out loud > Message-ID: > Content-Type: text/plain; charset="windows-1252" > > > well, yes, that was exactly one of the things it was designed for... > > On the way to Dayton recently, we (Mark K7IZA, Hans AE6TV and I) had exactly that.. An RTCM > connected to a cradlepoint router with a T-mobile USB datacard and a Motorola HT on a 440 > channel. It worked very well. > > And for this type of an application, if you REALLY want a "no brainer" setup, Micro-Node > offers a subscription-based hosting platform for Allstar Nodes using an RTCM in this manner. > In other words, for people who just want a simple, hassle-free mobile/portable node without > having to "hassle" with a Linux host, etc, they can also buy the service through Mark's company. > > Regardless of how you host the node, having the RTCM in a mobile/portable environment is > a GREAT way to go. Its low power consumption (72ma @ 12VDC), small size, and general > ruggedness, not to mention its very simple requirements for Internet connectivity (including > its ability to be behind any number of NATs, etc) make it the optimum solution for this type > of operation. > > I highly recommend you giving this a try. You will definitely like it. > > BTW, I am in the process of getting access to a picture of the device we took with us to > Dayton, and will post it once I get it. > > JIM WB6NIL > > > From: adamson_alan at hotmail.com > To: app_rpt-users at ohnosec.org > Date: Sun, 3 Jun 2012 10:02:31 -0400 > Subject: [App_rpt-users] Thinking out loud > > > > > > > Thinking out loud > > > > > I've been wanting to build a *mobile* node. On the surface, this seems pretty easy? What makes it complicated is the internet or network connections. > > > > I'm a tmobile subscriber for cell and mobile data. I decided recently to start building my mobile data carry alongs based upon a cradlepoint router, so far so good. So my Tmobile mobile device is comprised of a cradlepoint, and their 4G usb FOB. This works great for what I need it for?. Recently I found myself in an area where I didn't have very good tmo coverage so I grabbed a Verizon 4G lte FOB. I haven't thought about *incoming* data until working on my linking projects. > > > > This is where my mobile plan fell apart. > > It appears that most all of these 4G/LTE providers are going to a Natted private network on the 4G/LTE side. This isn't true of their 3G network, but is of their 4G side. Well as you might imagine if you don't have control of the NAT ad port forwarding, you can't put a server on user side of a 4G device :(. > > BUT then I had an epiphany (probably late because everyone else is already there)? > > The RTCM works so well for remoting my repeater?. Why not just use it as the mobile controller and instead of running a server remotely, just run an RTCM remotely back to a server. I think this will solve my problem. And perhaps make this even simpler to deal with along with a 4G type data connection. > > Anyone already wandered this path and what are you using? > > > > Thanks, > > Alan > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > > ------------------------------ > > Message: 2 > Date: Sun, 3 Jun 2012 15:26:06 -0400 > From: Alan Adamson > To: > Subject: [App_rpt-users] RTCM falsing DTMF > Message-ID: > Content-Type: text/plain; charset="us-ascii" > > ok, so is it normal for the RTCM to get false DTMF when voice is doing over > the link? I adjusted the RX audio so that the 2 lights were off with a 3khz > tone generated from a service monitor. > > I see oh between 6-8 DTMF's detected over the voter channel during use.. How > do you fix that issue? > > Alan > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > > ------------------------------ > > Message: 3 > Date: Sun, 3 Jun 2012 12:48:17 -0700 > From: Jim Duuuude > To: , app_rpt mailing list > > Subject: Re: [App_rpt-users] RTCM falsing DTMF > Message-ID: > Content-Type: text/plain; charset="windows-1252" > > > This has nothing to do with the RTCM. The DTMF receiver is the same one that is used in all the other > channel drivers for the other types of interfaces also. > > When the app_rpt stuff was first being developed (10+ years ago), the default parameters > for the DTMF receiver seemed too "tight" for radio use. There were a number of combinations > that were found of receivers and transmitting devices (HT's mobiles, etc) that did not seem to > work reliably with the parameters the way they were, so we developed the "RADIO_RELAX" set > of parameters, which are more "relaxed" then the normal ones. > > As time has gone on, there have been cases where using these "relaxed" parameters have seemed > to do more harm then good. I dont know if your case is one of those. If you wish to try, I suggest > re-compiling Asterisk with the RADIO_RELAX compile parameter turned off, and see if you like it > that way better. I can guarantee you that you will have less "falsing" if you do that. What I can not > guarantee is that you will get all the "real" digits decoded reliably (if you do that). > > Jim WB6NIL > > From: adamson_alan at hotmail.com > To: app_rpt-users at ohnosec.org > Date: Sun, 3 Jun 2012 15:26:06 -0400 > Subject: [App_rpt-users] RTCM falsing DTMF > > > > > > > RTCM falsing DTMF > > > > > ok, so is it normal for the RTCM to get false DTMF when voice is doing over the link? I adjusted the RX audio so that the 2 lights were off with a 3khz tone generated from a service monitor. > > > > I see oh between 6-8 DTMF's detected over the voter channel during use?. How do you fix that issue? > > Alan > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > > ------------------------------ > > Message: 4 > Date: Sun, 03 Jun 2012 13:51:15 -0700 > From: Tim Sawyer > To: app_rpt mailing list > Subject: Re: [App_rpt-users] RTCM falsing DTMF > Message-ID: <7C76EA27-4415-4796-97CD-7B92F1169BA5 at me.com> > Content-Type: text/plain; charset="windows-1252" > > I am one of those that found setting RADIO_RELAX off works much better. TT falsing has been reduced to near zero and decoding is still as fast as I can push the buttons. > > One thing I found was that I had to turn on the PL filter. Before I did that TT decoding was unbearably show with RADIO_RELAX off. > -- > Tim > :wq > > On Jun 3, 2012, at 12:48 PM, Jim Duuuude wrote: > >> This has nothing to do with the RTCM. The DTMF receiver is the same one that is used in all the other >> channel drivers for the other types of interfaces also. >> >> When the app_rpt stuff was first being developed (10+ years ago), the default parameters >> for the DTMF receiver seemed too "tight" for radio use. There were a number of combinations >> that were found of receivers and transmitting devices (HT's mobiles, etc) that did not seem to >> work reliably with the parameters the way they were, so we developed the "RADIO_RELAX" set >> of parameters, which are more "relaxed" then the normal ones. >> >> As time has gone on, there have been cases where using these "relaxed" parameters have seemed >> to do more harm then good. I dont know if your case is one of those. If you wish to try, I suggest >> re-compiling Asterisk with the RADIO_RELAX compile parameter turned off, and see if you like it >> that way better. I can guarantee you that you will have less "falsing" if you do that. What I can not >> guarantee is that you will get all the "real" digits decoded reliably (if you do that). >> >> Jim WB6NIL >> >> From: adamson_alan at hotmail.com >> To: app_rpt-users at ohnosec.org >> Date: Sun, 3 Jun 2012 15:26:06 -0400 >> Subject: [App_rpt-users] RTCM falsing DTMF >> >> ok, so is it normal for the RTCM to get false DTMF when voice is doing over the link? I adjusted the RX audio so that the 2 lights were off with a 3khz tone generated from a service monitor. >> I see oh between 6-8 DTMF's detected over the voter channel during use?. How do you fix that issue? >> Alan >> >> _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > > ------------------------------ > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > End of App_rpt-users Digest, Vol 40, Issue 6 > ******************************************** From telesistant at hotmail.com Sun Jun 3 22:11:09 2012 From: telesistant at hotmail.com (Jim Duuuude) Date: Sun, 3 Jun 2012 15:11:09 -0700 Subject: [App_rpt-users] Thinking out loud In-Reply-To: <928FACFA-D2DE-4780-BC84-FD741A24AE15@gmail.com> References: , <928FACFA-D2DE-4780-BC84-FD741A24AE15@gmail.com> Message-ID: I just talked to Mark (Micro-Node). The server is not yet in its "production" location. The "billing" interface is not yet implemented. You are more then welcome to have a node or 2 on the server as it currently exists (free, of course) until such time as it gets properly deployed in a "production" environment. Be aware, that it might not be online 100% of the time, and there may be some problems that you find that we do not know about. It would be nice, actually, for everyone involved if you did this, since it would give us good experience with a "real" user. I am positive that it will not be long until the server/service is up and running in its "production" form. JIM > From: k5try73 at gmail.com > Date: Sun, 3 Jun 2012 16:35:31 -0500 > To: app_rpt-users at ohnosec.org > Subject: Re: [App_rpt-users] Thinking out loud > > Kewl! Just my future my plans with my rtcm too, I wanting to get it portable. Look forward to the pic. And any further insight on mark's subscription based hosting platform? Last I heard it was still prototype not available? Price? Patiently waiting to see what all is entailed ... > > 73 sir! > > Tony > > ;(;) > AllStar 28384 > Irlp 7998 / 7766 / 7926 > Echo 563329 / 685499 / 722517 > :(:) > > > > On Jun 3, 2012, at 3:51 PM, app_rpt-users-request at ohnosec.org wrote: > > > Send App_rpt-users mailing list submissions to > > app_rpt-users at ohnosec.org > > > > To subscribe or unsubscribe via the World Wide Web, visit > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > or, via email, send a message with subject or body 'help' to > > app_rpt-users-request at ohnosec.org > > > > You can reach the person managing the list at > > app_rpt-users-owner at ohnosec.org > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of App_rpt-users digest..." > > > > > > Today's Topics: > > > > 1. Re: Thinking out loud (Jim Duuuude) > > 2. RTCM falsing DTMF (Alan Adamson) > > 3. Re: RTCM falsing DTMF (Jim Duuuude) > > 4. Re: RTCM falsing DTMF (Tim Sawyer) > > > > > > ---------------------------------------------------------------------- > > > > Message: 1 > > Date: Sun, 3 Jun 2012 09:13:45 -0700 > > From: Jim Duuuude > > To: , app_rpt mailing list > > > > Subject: Re: [App_rpt-users] Thinking out loud > > Message-ID: > > Content-Type: text/plain; charset="windows-1252" > > > > > > well, yes, that was exactly one of the things it was designed for... > > > > On the way to Dayton recently, we (Mark K7IZA, Hans AE6TV and I) had exactly that.. An RTCM > > connected to a cradlepoint router with a T-mobile USB datacard and a Motorola HT on a 440 > > channel. It worked very well. > > > > And for this type of an application, if you REALLY want a "no brainer" setup, Micro-Node > > offers a subscription-based hosting platform for Allstar Nodes using an RTCM in this manner. > > In other words, for people who just want a simple, hassle-free mobile/portable node without > > having to "hassle" with a Linux host, etc, they can also buy the service through Mark's company. > > > > Regardless of how you host the node, having the RTCM in a mobile/portable environment is > > a GREAT way to go. Its low power consumption (72ma @ 12VDC), small size, and general > > ruggedness, not to mention its very simple requirements for Internet connectivity (including > > its ability to be behind any number of NATs, etc) make it the optimum solution for this type > > of operation. > > > > I highly recommend you giving this a try. You will definitely like it. > > > > BTW, I am in the process of getting access to a picture of the device we took with us to > > Dayton, and will post it once I get it. > > > > JIM WB6NIL > > > > > > From: adamson_alan at hotmail.com > > To: app_rpt-users at ohnosec.org > > Date: Sun, 3 Jun 2012 10:02:31 -0400 > > Subject: [App_rpt-users] Thinking out loud > > > > > > > > > > > > > > Thinking out loud > > > > > > > > > > I've been wanting to build a *mobile* node. On the surface, this seems pretty easy? What makes it complicated is the internet or network connections. > > > > > > > > I'm a tmobile subscriber for cell and mobile data. I decided recently to start building my mobile data carry alongs based upon a cradlepoint router, so far so good. So my Tmobile mobile device is comprised of a cradlepoint, and their 4G usb FOB. This works great for what I need it for?. Recently I found myself in an area where I didn't have very good tmo coverage so I grabbed a Verizon 4G lte FOB. I haven't thought about *incoming* data until working on my linking projects. > > > > > > > > This is where my mobile plan fell apart. > > > > It appears that most all of these 4G/LTE providers are going to a Natted private network on the 4G/LTE side. This isn't true of their 3G network, but is of their 4G side. Well as you might imagine if you don't have control of the NAT ad port forwarding, you can't put a server on user side of a 4G device :(. > > > > BUT then I had an epiphany (probably late because everyone else is already there)? > > > > The RTCM works so well for remoting my repeater?. Why not just use it as the mobile controller and instead of running a server remotely, just run an RTCM remotely back to a server. I think this will solve my problem. And perhaps make this even simpler to deal with along with a 4G type data connection. > > > > Anyone already wandered this path and what are you using? > > > > > > > > Thanks, > > > > Alan > > > > > > > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users at ohnosec.org > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > -------------- next part -------------- > > An HTML attachment was scrubbed... > > URL: > > > > ------------------------------ > > > > Message: 2 > > Date: Sun, 3 Jun 2012 15:26:06 -0400 > > From: Alan Adamson > > To: > > Subject: [App_rpt-users] RTCM falsing DTMF > > Message-ID: > > Content-Type: text/plain; charset="us-ascii" > > > > ok, so is it normal for the RTCM to get false DTMF when voice is doing over > > the link? I adjusted the RX audio so that the 2 lights were off with a 3khz > > tone generated from a service monitor. > > > > I see oh between 6-8 DTMF's detected over the voter channel during use.. How > > do you fix that issue? > > > > Alan > > -------------- next part -------------- > > An HTML attachment was scrubbed... > > URL: > > > > ------------------------------ > > > > Message: 3 > > Date: Sun, 3 Jun 2012 12:48:17 -0700 > > From: Jim Duuuude > > To: , app_rpt mailing list > > > > Subject: Re: [App_rpt-users] RTCM falsing DTMF > > Message-ID: > > Content-Type: text/plain; charset="windows-1252" > > > > > > This has nothing to do with the RTCM. The DTMF receiver is the same one that is used in all the other > > channel drivers for the other types of interfaces also. > > > > When the app_rpt stuff was first being developed (10+ years ago), the default parameters > > for the DTMF receiver seemed too "tight" for radio use. There were a number of combinations > > that were found of receivers and transmitting devices (HT's mobiles, etc) that did not seem to > > work reliably with the parameters the way they were, so we developed the "RADIO_RELAX" set > > of parameters, which are more "relaxed" then the normal ones. > > > > As time has gone on, there have been cases where using these "relaxed" parameters have seemed > > to do more harm then good. I dont know if your case is one of those. If you wish to try, I suggest > > re-compiling Asterisk with the RADIO_RELAX compile parameter turned off, and see if you like it > > that way better. I can guarantee you that you will have less "falsing" if you do that. What I can not > > guarantee is that you will get all the "real" digits decoded reliably (if you do that). > > > > Jim WB6NIL > > > > From: adamson_alan at hotmail.com > > To: app_rpt-users at ohnosec.org > > Date: Sun, 3 Jun 2012 15:26:06 -0400 > > Subject: [App_rpt-users] RTCM falsing DTMF > > > > > > > > > > > > > > RTCM falsing DTMF > > > > > > > > > > ok, so is it normal for the RTCM to get false DTMF when voice is doing over the link? I adjusted the RX audio so that the 2 lights were off with a 3khz tone generated from a service monitor. > > > > > > > > I see oh between 6-8 DTMF's detected over the voter channel during use?. How do you fix that issue? > > > > Alan > > > > > > > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users at ohnosec.org > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > -------------- next part -------------- > > An HTML attachment was scrubbed... > > URL: > > > > ------------------------------ > > > > Message: 4 > > Date: Sun, 03 Jun 2012 13:51:15 -0700 > > From: Tim Sawyer > > To: app_rpt mailing list > > Subject: Re: [App_rpt-users] RTCM falsing DTMF > > Message-ID: <7C76EA27-4415-4796-97CD-7B92F1169BA5 at me.com> > > Content-Type: text/plain; charset="windows-1252" > > > > I am one of those that found setting RADIO_RELAX off works much better. TT falsing has been reduced to near zero and decoding is still as fast as I can push the buttons. > > > > One thing I found was that I had to turn on the PL filter. Before I did that TT decoding was unbearably show with RADIO_RELAX off. > > -- > > Tim > > :wq > > > > On Jun 3, 2012, at 12:48 PM, Jim Duuuude wrote: > > > >> This has nothing to do with the RTCM. The DTMF receiver is the same one that is used in all the other > >> channel drivers for the other types of interfaces also. > >> > >> When the app_rpt stuff was first being developed (10+ years ago), the default parameters > >> for the DTMF receiver seemed too "tight" for radio use. There were a number of combinations > >> that were found of receivers and transmitting devices (HT's mobiles, etc) that did not seem to > >> work reliably with the parameters the way they were, so we developed the "RADIO_RELAX" set > >> of parameters, which are more "relaxed" then the normal ones. > >> > >> As time has gone on, there have been cases where using these "relaxed" parameters have seemed > >> to do more harm then good. I dont know if your case is one of those. If you wish to try, I suggest > >> re-compiling Asterisk with the RADIO_RELAX compile parameter turned off, and see if you like it > >> that way better. I can guarantee you that you will have less "falsing" if you do that. What I can not > >> guarantee is that you will get all the "real" digits decoded reliably (if you do that). > >> > >> Jim WB6NIL > >> > >> From: adamson_alan at hotmail.com > >> To: app_rpt-users at ohnosec.org > >> Date: Sun, 3 Jun 2012 15:26:06 -0400 > >> Subject: [App_rpt-users] RTCM falsing DTMF > >> > >> ok, so is it normal for the RTCM to get false DTMF when voice is doing over the link? I adjusted the RX audio so that the 2 lights were off with a 3khz tone generated from a service monitor. > >> I see oh between 6-8 DTMF's detected over the voter channel during use?. How do you fix that issue? > >> Alan > >> > >> _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > >> _______________________________________________ > >> App_rpt-users mailing list > >> App_rpt-users at ohnosec.org > >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > -------------- next part -------------- > > An HTML attachment was scrubbed... > > URL: > > > > ------------------------------ > > > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users at ohnosec.org > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > > > End of App_rpt-users Digest, Vol 40, Issue 6 > > ******************************************** > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From rpt2 at chuck.midlandsnetworking.com Mon Jun 4 05:00:17 2012 From: rpt2 at chuck.midlandsnetworking.com (Chuck Henderson) Date: Mon, 4 Jun 2012 00:00:17 -0500 Subject: [App_rpt-users] RTCM falsing DTMF In-Reply-To: References: <7C76EA27-4415-4796-97CD-7B92F1169BA5@me.com> Message-ID: // My fix for the DTMF falsing problem is to make one change to the file dsp.c // /usr/src/trunk/asterisk/main/dsp.c // Change this line in dsp.c (find the line by searching for 26.0) #define DTMF_TO_TOTAL_ENERGY ((digitmode & DSP_DIGITMODE_RELAXDTMF) ? 26.0 : 42.0) // To look like this line #define DTMF_TO_TOTAL_ENERGY ((digitmode & DSP_DIGITMODE_RELAXDTMF) ? 38.0 : 42.0) // The result for our 2 repeaters, // one on VHF using the USB fob, // and the other on UHF using multiple RTCM's, // is a reduction of DTMF falsing from hundreds per day to only 2 or 3 per day and // no problems decoding DTMF. // I do not turn off RADIO_RELAX because doing so caused problems with DTMF decode. // The only problem with my fix is that I have to re-edit dsp.c every time I update. // Remember to do the usual "makes" after editing this file. On Sun, Jun 3, 2012 at 4:01 PM, Tim Sawyer wrote: > First I would update from svn, might as well as you have to recompile > anyway. The instructions to update from svn are at > https://allstarlink.org/support.html#astupgrade > > Before you do the make up grade edit > /usr/src/astsrc/asterisk/menuselect.makeopts > change the line that says > > MENUSELECT_CFLAGS=RADIO_RELAX LOADABLE_MODULES > to > MENUSELECT_CFLAGS=LOADABLE_MODULES > > then do make upgrade or make upgrade-acid as appropriate. > -- > Tim > :wq > > On Jun 3, 2012, at 1:51 PM, Tim Sawyer wrote: > > I am one of those that found setting RADIO_RELAX off works much better. TT > falsing has been reduced to near zero and decoding is still as fast as I > can push the buttons. > > One thing I found was that I had to turn on the PL filter. Before I did > that TT decoding was unbearably show with RADIO_RELAX off. > -- > Tim > :wq > > On Jun 3, 2012, at 12:48 PM, Jim Duuuude wrote: > > This has nothing to do with the RTCM. The DTMF receiver is the same one > that is used in all the other > channel drivers for the other types of interfaces also. > > When the app_rpt stuff was first being developed (10+ years ago), the > default parameters > for the DTMF receiver seemed too "tight" for radio use. There were a > number of combinations > that were found of receivers and transmitting devices (HT's mobiles, etc) > that did not seem to > work reliably with the parameters the way they were, so we developed the > "RADIO_RELAX" set > of parameters, which are more "relaxed" then the normal ones. > > As time has gone on, there have been cases where using these "relaxed" > parameters have seemed > to do more harm then good. I dont know if your case is one of those. If > you wish to try, I suggest > re-compiling Asterisk with the RADIO_RELAX compile parameter turned off, > and see if you like it > that way better. I can guarantee you that you will have less "falsing" if > you do that. What I can not > guarantee is that you will get all the "real" digits decoded reliably (if > you do that). > > Jim WB6NIL > > ------------------------------ > From: adamson_alan at hotmail.com > To: app_rpt-users at ohnosec.org > Date: Sun, 3 Jun 2012 15:26:06 -0400 > Subject: [App_rpt-users] RTCM falsing DTMF > > ok, so is it normal for the RTCM to get false DTMF when voice is doing > over the link? I adjusted the RX audio so that the 2 lights were off > with a 3khz tone generated from a service monitor. > > I see oh between 6-8 DTMF's detected over the voter channel during use?. > How do you fix that issue? > Alan > > _______________________________________________ App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dave_k_420 at yahoo.com Mon Jun 4 13:16:18 2012 From: dave_k_420 at yahoo.com (dave k) Date: Mon, 4 Jun 2012 06:16:18 -0700 (PDT) Subject: [App_rpt-users] debian install.. almost there.. Message-ID: <1338815778.18709.YahooMailClassic@web114012.mail.gq1.yahoo.com> im converint my server from ACID to custom debian squeeze. I managed to get svn-trunk.tar.gz compiled and installed correctly. i still need to get the following working. send portal heartbeat protal triggered downloading of configs usb device detection incoming call connection Here my asterisk startup log - it looks like its unable to find the URIx usb device? http://pastebin.com/uMXhKie1 I don't know whats causing it, but If i force load the java web applet - i can get 1 ring - then asterisk disconnects. Here is the asterisk logs. http://pastebin.com/UNGrBa3X Would be very thankfull on any suggestion on how to proceed with getting these issues resolved. thanks dave From ajp26 at buffalo.edu Mon Jun 4 13:37:00 2012 From: ajp26 at buffalo.edu (Pawlowski, Adam) Date: Mon, 4 Jun 2012 09:37:00 -0400 Subject: [App_rpt-users] Thinking Out Loud Message-ID: <1361B9676B9A41448EB672B89AA7731F0F30D740E0@MBCCR5.itorg.ad.buffalo.edu> This is one of the things that I was curious about with this device, and I'm glad to see that it works over the "4G" networks without major issues given the potential latency of those things. Our club maintains a couple of disparate repeaters and I'm not sure that a RF link between the two is needed for any particular purpose. Our UHF coverage is fairly abysmal so I was trying to suss out the merits of running a distributed repeater with lower power nodes hosted by members within our designated coverage area. That may be dangerous however. Given the (as far as I know) inability to run multiple URI's on a machine which may reboot (without re-assigning device IDs again) and that half our group seems to not trust anything that looks like a computer, the RTCM may work for them. Adam / KC2YQF From adamson_alan at hotmail.com Mon Jun 4 13:51:27 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Mon, 4 Jun 2012 09:51:27 -0400 Subject: [App_rpt-users] debian install.. almost there.. In-Reply-To: <02ea01cd4255$5f875350$1e95f9f0$@yahoo.com> References: <02ea01cd4255$5f875350$1e95f9f0$@yahoo.com> Message-ID: Here is the mod for the usb on the newer kernels... Can we somehow drive this into the sources please... http://www.kd0eav.info/downloads/asterisk-allstar-link/ Also, I made most of the changes listed in the zaptel fix too (but I don't' have zaptel hw), but the break on the kernel version is 2.6.33 for the change to generated/autoconf so fix those separately. I've had debian up and running for some time. Also you'll need to make sure and pull over some curl libraries, they will build in some other features of asterisk that the ./configure finds, it will build without them, but you'll occasionally get errors when someone connects to you from the web trans stuff. do an apt-get for this file libcurl4-openssl-dev and rebuild.... BTW, usb will build and appear to work, but it won't until you do the above. Also, you'll need to alsa/oss kernel module for your usb device. So make sure you install alsa, alsa-utils, alsa-lib - you'll have to google those to find the specific names.... I'm using the latest alsa sources for the realtek drivers and I build it with a cards=snd-had-intel, snd-usb-audio. I'm using URI's btw. Let me know if you have any other questions. I haven't pulled the latest svn and diff'd against my sources, I need to do that and then roll the worthy changes in. Alan -----Original Message----- From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of dave k Sent: Monday, June 04, 2012 9:16 AM To: App_rpt-users at ohnosec.org Subject: [App_rpt-users] debian install.. almost there.. im converint my server from ACID to custom debian squeeze. I managed to get svn-trunk.tar.gz compiled and installed correctly. i still need to get the following working. send portal heartbeat protal triggered downloading of configs usb device detection incoming call connection Here my asterisk startup log - it looks like its unable to find the URIx usb device? http://pastebin.com/uMXhKie1 I don't know whats causing it, but If i force load the java web applet - i can get 1 ring - then asterisk disconnects. Here is the asterisk logs. http://pastebin.com/UNGrBa3X Would be very thankfull on any suggestion on how to proceed with getting these issues resolved. thanks dave _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users From adamson_alan at hotmail.com Mon Jun 4 13:54:50 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Mon, 4 Jun 2012 09:54:50 -0400 Subject: [App_rpt-users] Thinking Out Loud In-Reply-To: <02f801cd4257$992fff60$cb8ffe20$@buffalo.edu> References: <02f801cd4257$992fff60$cb8ffe20$@buffalo.edu> Message-ID: So, only a very short use period... I'm currently running an RTCM at a remote repeater side, it's in full duplex mode and acts as a full node to my allstar (acid) server at my house. I'm using a cradlepoint CBR400 router with a usb 4G FOB plugged into it and the ethernet port plugged into the RTCM. It's actually amazing at how well this is working! I'll let you all know as I get more time under my belt and I wait for my actual inet connection there. Alan -----Original Message----- From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Pawlowski, Adam Sent: Monday, June 04, 2012 9:37 AM To: app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] Thinking Out Loud This is one of the things that I was curious about with this device, and I'm glad to see that it works over the "4G" networks without major issues given the potential latency of those things. Our club maintains a couple of disparate repeaters and I'm not sure that a RF link between the two is needed for any particular purpose. Our UHF coverage is fairly abysmal so I was trying to suss out the merits of running a distributed repeater with lower power nodes hosted by members within our designated coverage area. That may be dangerous however. Given the (as far as I know) inability to run multiple URI's on a machine which may reboot (without re-assigning device IDs again) and that half our group seems to not trust anything that looks like a computer, the RTCM may work for them. Adam / KC2YQF _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users From Bob at Fot.com.au Mon Jun 4 14:20:18 2012 From: Bob at Fot.com.au (Bob) Date: Mon, 04 Jun 2012 22:20:18 +0800 Subject: [App_rpt-users] Beagle Board-xM + LOX OS and power consumption In-Reply-To: References: Message-ID: <4FCCC422.5070700@Fot.com.au> I have set up a Beagle Board and DMK LOX interface I have put an entry in the Router for the port used I can get the WebTrancever to connect but not operate the PTT on the LOX If I go into the asterisk -r CLI and enter "beagle key" the PTT output activtes and of course "beagle unkey" drops PTT Can anyone confirm or suggest what I am doing wrong Bob VK6ZGN Perth, Western Australia From tim.sawyer at me.com Mon Jun 4 15:09:43 2012 From: tim.sawyer at me.com (Tim Sawyer) Date: Mon, 04 Jun 2012 08:09:43 -0700 Subject: [App_rpt-users] RTCM falsing DTMF In-Reply-To: References: <7C76EA27-4415-4796-97CD-7B92F1169BA5@me.com> Message-ID: <696D3DB4-ABC0-470A-A65D-27923E057431@me.com> What one says on the internet never goes away. I posted that before I found that not filtering PL was causing a problem. That older post is still valid if RADIO_RELAX is too loose for your system. -- Tim :wq On Jun 3, 2012, at 10:00 PM, Chuck Henderson wrote: > > // My fix for the DTMF falsing problem is to make one change to the file dsp.c > // /usr/src/trunk/asterisk/main/dsp.c > // Change this line in dsp.c (find the line by searching for 26.0) > #define DTMF_TO_TOTAL_ENERGY ((digitmode & DSP_DIGITMODE_RELAXDTMF) ? 26.0 : 42.0) > // To look like this line > #define DTMF_TO_TOTAL_ENERGY ((digitmode & DSP_DIGITMODE_RELAXDTMF) ? 38.0 : 42.0) > // The result for our 2 repeaters, > // one on VHF using the USB fob, > // and the other on UHF using multiple RTCM's, > // is a reduction of DTMF falsing from hundreds per day to only 2 or 3 per day and > // no problems decoding DTMF. > // I do not turn off RADIO_RELAX because doing so caused problems with DTMF decode. > // The only problem with my fix is that I have to re-edit dsp.c every time I update. > // Remember to do the usual "makes" after editing this file. > > > On Sun, Jun 3, 2012 at 4:01 PM, Tim Sawyer wrote: > First I would update from svn, might as well as you have to recompile anyway. The instructions to update from svn are at https://allstarlink.org/support.html#astupgrade > > Before you do the make up grade edit /usr/src/astsrc/asterisk/menuselect.makeopts > change the line that says > > MENUSELECT_CFLAGS=RADIO_RELAX LOADABLE_MODULES > to > MENUSELECT_CFLAGS=LOADABLE_MODULES > > then do make upgrade or make upgrade-acid as appropriate. > -- > Tim > :wq > > On Jun 3, 2012, at 1:51 PM, Tim Sawyer wrote: > >> I am one of those that found setting RADIO_RELAX off works much better. TT falsing has been reduced to near zero and decoding is still as fast as I can push the buttons. >> >> One thing I found was that I had to turn on the PL filter. Before I did that TT decoding was unbearably show with RADIO_RELAX off. >> -- >> Tim >> :wq >> >> On Jun 3, 2012, at 12:48 PM, Jim Duuuude wrote: >> >>> This has nothing to do with the RTCM. The DTMF receiver is the same one that is used in all the other >>> channel drivers for the other types of interfaces also. >>> >>> When the app_rpt stuff was first being developed (10+ years ago), the default parameters >>> for the DTMF receiver seemed too "tight" for radio use. There were a number of combinations >>> that were found of receivers and transmitting devices (HT's mobiles, etc) that did not seem to >>> work reliably with the parameters the way they were, so we developed the "RADIO_RELAX" set >>> of parameters, which are more "relaxed" then the normal ones. >>> >>> As time has gone on, there have been cases where using these "relaxed" parameters have seemed >>> to do more harm then good. I dont know if your case is one of those. If you wish to try, I suggest >>> re-compiling Asterisk with the RADIO_RELAX compile parameter turned off, and see if you like it >>> that way better. I can guarantee you that you will have less "falsing" if you do that. What I can not >>> guarantee is that you will get all the "real" digits decoded reliably (if you do that). >>> >>> Jim WB6NIL >>> >>> From: adamson_alan at hotmail.com >>> To: app_rpt-users at ohnosec.org >>> Date: Sun, 3 Jun 2012 15:26:06 -0400 >>> Subject: [App_rpt-users] RTCM falsing DTMF >>> >>> ok, so is it normal for the RTCM to get false DTMF when voice is doing over the link? I adjusted the RX audio so that the 2 lights were off with a 3khz tone generated from a service monitor. >>> I see oh between 6-8 DTMF's detected over the voter channel during use?. How do you fix that issue? >>> Alan >>> >>> _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users at ohnosec.org >>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From rpt2 at chuck.midlandsnetworking.com Mon Jun 4 16:26:57 2012 From: rpt2 at chuck.midlandsnetworking.com (Chuck Henderson) Date: Mon, 4 Jun 2012 11:26:57 -0500 Subject: [App_rpt-users] APRS TT and APRS BEACON rate on ALLSTAR LINK.. In-Reply-To: References: Message-ID: APRSTT on my systems works for some call signs but not for some others. Here is an example from the aprs.fi raw log. Can anyone shed some light on why N9DOA shows up as "*[Invalid object]*"? Is it a problem with aprs.fi or with the code in app_rpt, or with the way I setup rpt.conf? Chuck 2012-06-04 14:05:58 UTC: *WB9UUS-R *>APRS,TCPIP*,qAC,CORE-2:=4030.48N/08859.28WrPHG9580/AllStar Node 27468 2012-06-04 14:06:08 UTC: *WB9UUS-R * >APSTAR,TCPIP*,qAC,CORE-2:;WB9UUS-12*140608z4030.38N708859.28WAAsterisk app_rpt user 2012-06-04 14:38:05 UTC: *WB9UUS-R * >APSTAR,TCPIP*,qAC,CORE-2:;N9DOA-12*143805z4030.28N908859.28WAAsterisk app_rpt user *[Invalid object]* 2012-06-04 15:00:22 UTC: *WB9UUS-R * >APSTAR,TCPIP*,qAC,CORE-2:;WB9UUS-12*150021z4030.38N908859.28WAAsterisk app_rpt user 2012-06-04 15:13:33 UTC: *WB9UUS-R * >APSTAR,TCPIP*,qAC,CORE-2:;N9DOA-12*151333z4030.28N708859.28WAAsterisk app_rpt user *[Invalid object]* 2012-06-04 15:52:32 UTC: *WB9UUS-R * >APSTAR,TCPIP*,qAC,CORE-2:;WB9UWA-12*155231z4030.18N708859.28WAAsterisk app_rpt user 2012-06-04 15:52:39 UTC: *WB9UUS-R *>APRS,TCPIP*,qAC,CORE-2:=4030.48N/08859.28WrPHG9580/AllStar Node 27468 On Thu, May 3, 2012 at 8:09 PM, Bradley Haney wrote: > To get aprs TT working on ALLSTARLINK down load the latest from the SVN. > > Upgrading Asterisk to latest (SVN) version > > If you are using a brand-new current version of ACID or Limey Linux > (that was released after the implementation of this new Portal) you > are already upgraded sufficiently. If not ... > > Asterisk must be upgraded to the latest SVN version. > > For the ACID distribution (and other Linux platforms): > cd /usr/src > rm -rf astsrc > wget http://x.allstarlink.org/svn-trunk.tar.gz -O- | tar xzv > mv trunk astsrc > cd astsrc > make upgrade-acid > > > Then go into the rpt.conf file and add APRSTT= > > some where in that file. I made it the first line in that config file > right underneath the node number > > Then just google APRS TT and there is a link on Bob's aprs site on > everything about APRSTT.. > > > Then to get it to only beacon every 10 min's i added interval=600 > into the gps.conf file. > > 73's > > Bradley > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > -------------- next part -------------- An HTML attachment was scrubbed... URL: From george at dyb.com Mon Jun 4 16:29:03 2012 From: george at dyb.com (George Csahanin) Date: Mon, 4 Jun 2012 11:29:03 -0500 Subject: [App_rpt-users] Beagle Board-xM + LOX OS and power consumption References: <4FCCC422.5070700@Fot.com.au> Message-ID: <648B2468C1634854B571BF2A62DD92BB@lintv.com> Try rpt stats and rpt showvars, see if you're "timed out" and/or what the COS/CTCSS status is. GeorgeC ----- Original Message ----- From: "Bob" To: Sent: Monday, June 04, 2012 9:20 AM Subject: Re: [App_rpt-users] Beagle Board-xM + LOX OS and power consumption >I have set up a Beagle Board and DMK LOX interface > I have put an entry in the Router for the port used > I can get the WebTrancever to connect but not operate the PTT on the LOX > > If I go into the asterisk -r CLI and enter "beagle key" the PTT output > activtes > and of course "beagle unkey" drops PTT > Can anyone confirm or suggest what I am doing wrong > > Bob > VK6ZGN Perth, Western Australia > > > > From tom.km5vy at gmail.com Mon Jun 4 16:44:03 2012 From: tom.km5vy at gmail.com (Tom Russo) Date: Mon, 4 Jun 2012 10:44:03 -0600 Subject: [App_rpt-users] APRS TT and APRS BEACON rate on ALLSTAR LINK.. In-Reply-To: References: Message-ID: On Mon, Jun 4, 2012 at 10:26 AM, Chuck Henderson < rpt2 at chuck.midlandsnetworking.com> wrote: > APRSTT on my systems works for some call signs but not for some others. > Here is an example from the aprs.fi raw log. > Can anyone shed some light on why N9DOA shows up as "*[Invalid object]*"? > > Is it a problem with aprs.fi or with the code in app_rpt, or with the way > I setup rpt.conf? > Chuck > > 2012-06-04 14:05:58 UTC: *WB9UUS-R > *>APRS,TCPIP*,qAC,CORE-2:=4030.48N/08859.28WrPHG9580/AllStar Node 27468 > 2012-06-04 14:06:08 UTC: *WB9UUS-R > * > >APSTAR,TCPIP*,qAC,CORE-2:;WB9UUS-12*140608z4030.38N708859.28WAAsterisk app_rpt user > 2012-06-04 14:38:05 UTC: *WB9UUS-R > * > >APSTAR,TCPIP*,qAC,CORE-2:;N9DOA-12*143805z4030.28N908859.28WAAsterisk app_rpt user > *[Invalid object]* > 2012-06-04 15:00:22 UTC: *WB9UUS-R > * > >APSTAR,TCPIP*,qAC,CORE-2:;WB9UUS-12*150021z4030.38N908859.28WAAsterisk app_rpt user > 2012-06-04 15:13:33 UTC: *WB9UUS-R > * > >APSTAR,TCPIP*,qAC,CORE-2:;N9DOA-12*151333z4030.28N708859.28WAAsterisk app_rpt user > *[Invalid object]* > 2012-06-04 15:52:32 UTC: *WB9UUS-R > * > >APSTAR,TCPIP*,qAC,CORE-2:;WB9UWA-12*155231z4030.18N708859.28WAAsterisk app_rpt user > 2012-06-04 15:52:39 UTC: *WB9UUS-R > *>APRS,TCPIP*,qAC,CORE-2:=4030.48N/08859.28WrPHG9580/AllStar Node 27468 > > The reason is that APRS object names must be padded on the right to be exactly 9 characters. WB9UUS-12 is 9 characters, but N9DOA-12 is only 8 --- you need to pad it out with spaces so the payload is: ;N9DOA-12 *151333z4030.28N708859.28WAAsterisk app_rpt user (note the extra space before the "*") -- Tom Russo KM5VY SAR502 DM64ux http://www.swcp.com/~russo/ Tijeras, NM QRPL#1592 K2#398 SOC#236 http://kevan.org/brain.cgi?DDTNM "One man alone can be pretty dumb sometimes, but for real bona fide stupidity, there ain't nothin' can beat teamwork." - Edward Abbey -------------- next part -------------- An HTML attachment was scrubbed... URL: From telesistant at hotmail.com Mon Jun 4 17:35:28 2012 From: telesistant at hotmail.com (Jim Duuuude) Date: Mon, 4 Jun 2012 10:35:28 -0700 Subject: [App_rpt-users] APRS TT and APRS BEACON rate on ALLSTAR LINK.. In-Reply-To: References: , , Message-ID: Boy, *that* was just painfully obvious... (NOT!) Okay, I'll fix it. :-) Thanks for letting me know. JIM From: tom.km5vy at gmail.com Date: Mon, 4 Jun 2012 10:44:03 -0600 To: rpt2 at chuck.midlandsnetworking.com CC: kc9gqr at gmail.com; app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] APRS TT and APRS BEACON rate on ALLSTAR LINK.. On Mon, Jun 4, 2012 at 10:26 AM, Chuck Henderson wrote: APRSTT on my systems works for some call signs but not for some others. Here is an example from the aprs.fi raw log. Can anyone shed some light on why N9DOA shows up as "[Invalid object]"? Is it a problem with aprs.fi or with the code in app_rpt, or with the way I setup rpt.conf? Chuck 2012-06-04 14:05:58 UTC: WB9UUS-R>APRS,TCPIP*,qAC,CORE-2:=4030.48N/08859.28WrPHG9580/AllStar Node 27468 2012-06-04 14:06:08 UTC: WB9UUS-R>APSTAR,TCPIP*,qAC,CORE-2:;WB9UUS-12*140608z4030.38N708859.28WAAsterisk app_rpt user 2012-06-04 14:38:05 UTC: WB9UUS-R>APSTAR,TCPIP*,qAC,CORE-2:;N9DOA-12*143805z4030.28N908859.28WAAsterisk app_rpt user [Invalid object] 2012-06-04 15:00:22 UTC: WB9UUS-R>APSTAR,TCPIP*,qAC,CORE-2:;WB9UUS-12*150021z4030.38N908859.28WAAsterisk app_rpt user 2012-06-04 15:13:33 UTC: WB9UUS-R>APSTAR,TCPIP*,qAC,CORE-2:;N9DOA-12*151333z4030.28N708859.28WAAsterisk app_rpt user [Invalid object] 2012-06-04 15:52:32 UTC: WB9UUS-R>APSTAR,TCPIP*,qAC,CORE-2:;WB9UWA-12*155231z4030.18N708859.28WAAsterisk app_rpt user 2012-06-04 15:52:39 UTC: WB9UUS-R>APRS,TCPIP*,qAC,CORE-2:=4030.48N/08859.28WrPHG9580/AllStar Node 27468 The reason is that APRS object names must be padded on the right to be exactly 9 characters. WB9UUS-12 is 9 characters, but N9DOA-12 is only 8 --- you need to pad it out with spaces so the payload is: ;N9DOA-12 *151333z4030.28N708859.28WAAsterisk app_rpt user (note the extra space before the "*") -- Tom Russo KM5VY SAR502 DM64ux http://www.swcp.com/~russo/ Tijeras, NM QRPL#1592 K2#398 SOC#236 http://kevan.org/brain.cgi?DDTNM "One man alone can be pretty dumb sometimes, but for real bona fide stupidity, there ain't nothin' can beat teamwork." - Edward Abbey _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From tom.km5vy at gmail.com Mon Jun 4 17:42:20 2012 From: tom.km5vy at gmail.com (Tom Russo) Date: Mon, 4 Jun 2012 11:42:20 -0600 Subject: [App_rpt-users] APRS TT and APRS BEACON rate on ALLSTAR LINK.. In-Reply-To: References: Message-ID: On Mon, Jun 4, 2012 at 11:35 AM, Jim Duuuude wrote: > Boy, *that* was just painfully obvious... (NOT!) > > Heh. It's documented pretty clearly in the APRS spec, once you find it. Unfortunately the spec is divided between an official PDF document and a collection of HTML "addenda". All can be found (with a little eye strain) on www.aprs.org. > Okay, I'll fix it. :-) > Excellent. > Thanks for letting me know. > NP. ------------------------------ From: tom.km5vy at gmail.com Date: Mon, 4 Jun 2012 10:44:03 -0600 To: rpt2 at chuck.midlandsnetworking.com CC: kc9gqr at gmail.com; app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] APRS TT and APRS BEACON rate on ALLSTAR LINK.. On Mon, Jun 4, 2012 at 10:26 AM, Chuck Henderson < rpt2 at chuck.midlandsnetworking.com> wrote: APRSTT on my systems works for some call signs but not for some others. Here is an example from the aprs.fi raw log. Can anyone shed some light on why N9DOA shows up as "*[Invalid object]*"? Is it a problem with aprs.fi or with the code in app_rpt, or with the way I setup rpt.conf? Chuck 2012-06-04 14:05:58 UTC: *WB9UUS-R *>APRS,TCPIP*,qAC,CORE-2:=4030.48N/08859.28WrPHG9580/AllStar Node 27468 2012-06-04 14:06:08 UTC: *WB9UUS-R * >APSTAR,TCPIP*,qAC,CORE-2:;WB9UUS-12*140608z4030.38N708859.28WAAsterisk app_rpt user 2012-06-04 14:38:05 UTC: *WB9UUS-R * >APSTAR,TCPIP*,qAC,CORE-2:;N9DOA-12*143805z4030.28N908859.28WAAsterisk app_rpt user *[Invalid object]* 2012-06-04 15:00:22 UTC: *WB9UUS-R * >APSTAR,TCPIP*,qAC,CORE-2:;WB9UUS-12*150021z4030.38N908859.28WAAsterisk app_rpt user 2012-06-04 15:13:33 UTC: *WB9UUS-R * >APSTAR,TCPIP*,qAC,CORE-2:;N9DOA-12*151333z4030.28N708859.28WAAsterisk app_rpt user *[Invalid object]* 2012-06-04 15:52:32 UTC: *WB9UUS-R * >APSTAR,TCPIP*,qAC,CORE-2:;WB9UWA-12*155231z4030.18N708859.28WAAsterisk app_rpt user 2012-06-04 15:52:39 UTC: *WB9UUS-R *>APRS,TCPIP*,qAC,CORE-2:=4030.48N/08859.28WrPHG9580/AllStar Node 27468 The reason is that APRS object names must be padded on the right to be exactly 9 characters. WB9UUS-12 is 9 characters, but N9DOA-12 is only 8 --- you need to pad it out with spaces so the payload is: ;N9DOA-12 *151333z4030.28N708859.28WAAsterisk app_rpt user (note the extra space before the "*") -- Tom Russo KM5VY SAR502 DM64ux http://www.swcp.com/~russo/ Tijeras, NM QRPL#1592 K2#398 SOC#236 http://kevan.org/brain.cgi?DDTNM "One man alone can be pretty dumb sometimes, but for real bona fide stupidity, there ain't nothin' can beat teamwork." - Edward Abbey -------------- next part -------------- An HTML attachment was scrubbed... URL: From rpt2 at chuck.midlandsnetworking.com Mon Jun 4 17:55:00 2012 From: rpt2 at chuck.midlandsnetworking.com (Chuck Henderson) Date: Mon, 4 Jun 2012 12:55:00 -0500 Subject: [App_rpt-users] APRS TT and APRS BEACON rate on ALLSTAR LINK.. In-Reply-To: References: Message-ID: Well I don't think I can enter a space using touchtone so it must need to be fixed in the app_rpt software. I am running the latest software as of May 9 2012. I'm not sure where in the C code to fix this but I think maybe it would be in gps.c sprintf(buf,"%s>APSTAR:;%s-12*%02d%02d%02dz%s%c%sA%s\n", call,theircall,tm->tm_hour,tm->tm_min,tm->tm_sec,lat,overlay,lon,comment); if theircall is less than 6 char then theircall-12 needs to be padded on the right with spaces to make it a total of 9 char in length. I think that it will be easy for Jim to fix, he might even have it fixed faster than I can type this email. Chuck On Mon, Jun 4, 2012 at 11:44 AM, Tom Russo wrote: > > > On Mon, Jun 4, 2012 at 10:26 AM, Chuck Henderson < > rpt2 at chuck.midlandsnetworking.com> wrote: > >> APRSTT on my systems works for some call signs but not for some others. >> Here is an example from the aprs.fi raw log. >> Can anyone shed some light on why N9DOA shows up as "*[Invalid object]*"? >> >> Is it a problem with aprs.fi or with the code in app_rpt, or with the >> way I setup rpt.conf? >> Chuck >> >> 2012-06-04 14:05:58 UTC: *WB9UUS-R >> *>APRS,TCPIP*,qAC,CORE-2:=4030.48N/08859.28WrPHG9580/AllStar Node 27468 >> 2012-06-04 14:06:08 UTC: *WB9UUS-R >> * >> >APSTAR,TCPIP*,qAC,CORE-2:;WB9UUS-12*140608z4030.38N708859.28WAAsterisk app_rpt user >> 2012-06-04 14:38:05 UTC: *WB9UUS-R >> * >> >APSTAR,TCPIP*,qAC,CORE-2:;N9DOA-12*143805z4030.28N908859.28WAAsterisk app_rpt user >> *[Invalid object]* >> 2012-06-04 15:00:22 UTC: *WB9UUS-R >> * >> >APSTAR,TCPIP*,qAC,CORE-2:;WB9UUS-12*150021z4030.38N908859.28WAAsterisk app_rpt user >> 2012-06-04 15:13:33 UTC: *WB9UUS-R >> * >> >APSTAR,TCPIP*,qAC,CORE-2:;N9DOA-12*151333z4030.28N708859.28WAAsterisk app_rpt user >> *[Invalid object]* >> 2012-06-04 15:52:32 UTC: *WB9UUS-R >> * >> >APSTAR,TCPIP*,qAC,CORE-2:;WB9UWA-12*155231z4030.18N708859.28WAAsterisk app_rpt user >> 2012-06-04 15:52:39 UTC: *WB9UUS-R >> *>APRS,TCPIP*,qAC,CORE-2:=4030.48N/08859.28WrPHG9580/AllStar Node 27468 >> >> > The reason is that APRS object names must be padded on the right to be > exactly 9 characters. WB9UUS-12 is 9 characters, but N9DOA-12 is only 8 > --- you need to pad it out with spaces so the payload is: > > ;N9DOA-12 *151333z4030.28N708859.28WAAsterisk app_rpt user > > (note the extra space before the "*") > > > -- > Tom Russo KM5VY SAR502 DM64ux http://www.swcp.com/~russo/ > Tijeras, NM QRPL#1592 K2#398 SOC#236 http://kevan.org/brain.cgi?DDTNM > "One man alone can be pretty dumb sometimes, but for real bona fide > stupidity, there ain't nothin' can beat teamwork." - Edward Abbey > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From tom.km5vy at gmail.com Mon Jun 4 18:06:10 2012 From: tom.km5vy at gmail.com (Tom Russo) Date: Mon, 4 Jun 2012 12:06:10 -0600 Subject: [App_rpt-users] APRS TT and APRS BEACON rate on ALLSTAR LINK.. In-Reply-To: References: Message-ID: On Mon, Jun 4, 2012 at 11:55 AM, Chuck Henderson < rpt2 at chuck.midlandsnetworking.com> wrote: > Well I don't think I can enter a space using touchtone so it must need to > be fixed in the app_rpt software. > I am running the latest software as of May 9 2012. I'm not sure where in > the C code to fix this but I think maybe it would be in gps.c > sprintf(buf,"%s>APSTAR:;%s-12*%02d%02d%02dz%s%c%sA%s\n", > > call,theircall,tm->tm_hour,tm->tm_min,tm->tm_sec,lat,overlay,lon,comment); > > if theircall is less than 6 char then theircall-12 needs to be padded on > the right with spaces to make it a total of 9 char in length. > Yes, that's precisely where the fix needs to happen. On Mon, Jun 4, 2012 at 11:44 AM, Tom Russo wrote: > > > On Mon, Jun 4, 2012 at 10:26 AM, Chuck Henderson < > rpt2 at chuck.midlandsnetworking.com> wrote: > >> APRSTT on my systems works for some call signs but not for some others. >> Here is an example from the aprs.fi raw log. >> Can anyone shed some light on why N9DOA shows up as "*[Invalid object]*"? >> >> Is it a problem with aprs.fi or with the code in app_rpt, or with the >> way I setup rpt.conf? >> Chuck >> >> 2012-06-04 14:05:58 UTC: *WB9UUS-R >> *>APRS,TCPIP*,qAC,CORE-2:=4030.48N/08859.28WrPHG9580/AllStar Node 27468 >> 2012-06-04 14:06:08 UTC: *WB9UUS-R >> * >> >APSTAR,TCPIP*,qAC,CORE-2:;WB9UUS-12*140608z4030.38N708859.28WAAsterisk app_rpt user >> 2012-06-04 14:38:05 UTC: *WB9UUS-R >> * >> >APSTAR,TCPIP*,qAC,CORE-2:;N9DOA-12*143805z4030.28N908859.28WAAsterisk app_rpt user >> *[Invalid object]* >> 2012-06-04 15:00:22 UTC: *WB9UUS-R >> * >> >APSTAR,TCPIP*,qAC,CORE-2:;WB9UUS-12*150021z4030.38N908859.28WAAsterisk app_rpt user >> 2012-06-04 15:13:33 UTC: *WB9UUS-R >> * >> >APSTAR,TCPIP*,qAC,CORE-2:;N9DOA-12*151333z4030.28N708859.28WAAsterisk app_rpt user >> *[Invalid object]* >> 2012-06-04 15:52:32 UTC: *WB9UUS-R >> * >> >APSTAR,TCPIP*,qAC,CORE-2:;WB9UWA-12*155231z4030.18N708859.28WAAsterisk app_rpt user >> 2012-06-04 15:52:39 UTC: *WB9UUS-R >> *>APRS,TCPIP*,qAC,CORE-2:=4030.48N/08859.28WrPHG9580/AllStar Node 27468 >> >> > The reason is that APRS object names must be padded on the right to be > exactly 9 characters. WB9UUS-12 is 9 characters, but N9DOA-12 is only 8 > --- you need to pad it out with spaces so the payload is: > > ;N9DOA-12 *151333z4030.28N708859.28WAAsterisk app_rpt user > > (note the extra space before the "*") > > > -- > Tom Russo KM5VY SAR502 DM64ux http://www.swcp.com/~russo/ > Tijeras, NM QRPL#1592 K2#398 SOC#236 http://kevan.org/brain.cgi?DDTNM > "One man alone can be pretty dumb sometimes, but for real bona fide > stupidity, there ain't nothin' can beat teamwork." - Edward Abbey > > > > -- Tom Russo KM5VY SAR502 DM64ux http://www.swcp.com/~russo/ Tijeras, NM QRPL#1592 K2#398 SOC#236 http://kevan.org/brain.cgi?DDTNM "One man alone can be pretty dumb sometimes, but for real bona fide stupidity, there ain't nothin' can beat teamwork." - Edward Abbey -------------- next part -------------- An HTML attachment was scrubbed... URL: From pete.elke at esquared.com Mon Jun 4 20:34:54 2012 From: pete.elke at esquared.com (Peter Elke) Date: Mon, 4 Jun 2012 20:34:54 -0000 Subject: [App_rpt-users] Thinking Out Loud In-Reply-To: References: <02f801cd4257$992fff60$cb8ffe20$@buffalo.edu> Message-ID: <8035B62A7B044D4B81015D5C49D1627D7EDE61@webmail.esquared.net> Alan/Adam, I have been doing this all over the world with my RTCM (S/N 2 or 3) and two MiFi units (one US, one EU) and it works great. Driving around Athens on 434mhz coming out in SFO full time is way cool. I take it all over, I think the RTCM had 80K Frequent Flyer Miles at this point. The only tricky part is that the home users can't tell if you drop out of cell range. Jim added an option so I can tell on the RTCM side but the far end users can tell why you just disappear from time to time. 73's Pete/wi6h -----Original Message----- From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Alan Adamson Sent: Monday, June 04, 2012 6:55 AM To: 'Pawlowski, Adam'; app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] Thinking Out Loud So, only a very short use period... I'm currently running an RTCM at a remote repeater side, it's in full duplex mode and acts as a full node to my allstar (acid) server at my house. I'm using a cradlepoint CBR400 router with a usb 4G FOB plugged into it and the ethernet port plugged into the RTCM. It's actually amazing at how well this is working! I'll let you all know as I get more time under my belt and I wait for my actual inet connection there. Alan -----Original Message----- From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Pawlowski, Adam Sent: Monday, June 04, 2012 9:37 AM To: app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] Thinking Out Loud This is one of the things that I was curious about with this device, and I'm glad to see that it works over the "4G" networks without major issues given the potential latency of those things. Our club maintains a couple of disparate repeaters and I'm not sure that a RF link between the two is needed for any particular purpose. Our UHF coverage is fairly abysmal so I was trying to suss out the merits of running a distributed repeater with lower power nodes hosted by members within our designated coverage area. That may be dangerous however. Given the (as far as I know) inability to run multiple URI's on a machine which may reboot (without re-assigning device IDs again) and that half our group seems to not trust anything that looks like a computer, the RTCM may work for them. Adam / KC2YQF _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users From tim.sawyer at me.com Tue Jun 5 02:33:07 2012 From: tim.sawyer at me.com (Tim Sawyer) Date: Mon, 04 Jun 2012 19:33:07 -0700 Subject: [App_rpt-users] RTCM falsing DTMF In-Reply-To: <00a101cd42af$d7891e10$869b5a30$@cs.com> References: <7C76EA27-4415-4796-97CD-7B92F1169BA5@me.com> <696D3DB4-ABC0-470A-A65D-27923E057431@me.com> <00a101cd42af$d7891e10$869b5a30$@cs.com> Message-ID: <4BFC5069-D107-4C0D-923D-C58D3D1BC79A@me.com> In simpleusb.conf or voter.conf or as in your case, usbradio.conf you can add a statement: plfilter = yes which will place a 300Hz high pass filter on the receive audio. -- Tim :wq On Jun 4, 2012, at 5:12 PM, Ken wrote: > Tim ? what do you mean by ?filtering PL?? > > Do you just mean ctcssfrom=dsp > Or is it something else? > > Ken > > > From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Tim Sawyer > Sent: Monday, June 04, 2012 11:10 AM > To: Chuck Henderson > Cc: app_rpt mailing list > Subject: Re: [App_rpt-users] RTCM falsing DTMF > > What one says on the internet never goes away. I posted that before I found that not filtering PL was causing a problem. That older post is still valid if RADIO_RELAX is too loose for your system. > -- > Tim > :wq > > On Jun 3, 2012, at 10:00 PM, Chuck Henderson wrote: > > > > // My fix for the DTMF falsing problem is to make one change to the file dsp.c > // /usr/src/trunk/asterisk/main/dsp.c > // Change this line in dsp.c (find the line by searching for 26.0) > #define DTMF_TO_TOTAL_ENERGY ((digitmode & DSP_DIGITMODE_RELAXDTMF) ? 26.0 : 42.0) > // To look like this line > #define DTMF_TO_TOTAL_ENERGY ((digitmode & DSP_DIGITMODE_RELAXDTMF) ? 38.0 : 42.0) > // The result for our 2 repeaters, > // one on VHF using the USB fob, > // and the other on UHF using multiple RTCM's, > // is a reduction of DTMF falsing from hundreds per day to only 2 or 3 per day and > // no problems decoding DTMF. > // I do not turn off RADIO_RELAX because doing so caused problems with DTMF decode. > // The only problem with my fix is that I have to re-edit dsp.c every time I update. > // Remember to do the usual "makes" after editing this file. > > > On Sun, Jun 3, 2012 at 4:01 PM, Tim Sawyer wrote: > First I would update from svn, might as well as you have to recompile anyway. The instructions to update from svn are at https://allstarlink.org/support.html#astupgrade > > Before you do the make up grade edit /usr/src/astsrc/asterisk/menuselect.makeopts > change the line that says > > MENUSELECT_CFLAGS=RADIO_RELAX LOADABLE_MODULES > to > MENUSELECT_CFLAGS=LOADABLE_MODULES > > then do make upgrade or make upgrade-acid as appropriate. > -- > Tim > :wq > > On Jun 3, 2012, at 1:51 PM, Tim Sawyer wrote: > > > I am one of those that found setting RADIO_RELAX off works much better. TT falsing has been reduced to near zero and decoding is still as fast as I can push the buttons. > > One thing I found was that I had to turn on the PL filter. Before I did that TT decoding was unbearably show with RADIO_RELAX off. > -- > Tim > :wq > > On Jun 3, 2012, at 12:48 PM, Jim Duuuude wrote: > > > This has nothing to do with the RTCM. The DTMF receiver is the same one that is used in all the other > channel drivers for the other types of interfaces also. > > When the app_rpt stuff was first being developed (10+ years ago), the default parameters > for the DTMF receiver seemed too "tight" for radio use. There were a number of combinations > that were found of receivers and transmitting devices (HT's mobiles, etc) that did not seem to > work reliably with the parameters the way they were, so we developed the "RADIO_RELAX" set > of parameters, which are more "relaxed" then the normal ones. > > As time has gone on, there have been cases where using these "relaxed" parameters have seemed > to do more harm then good. I dont know if your case is one of those. If you wish to try, I suggest > re-compiling Asterisk with the RADIO_RELAX compile parameter turned off, and see if you like it > that way better. I can guarantee you that you will have less "falsing" if you do that. What I can not > guarantee is that you will get all the "real" digits decoded reliably (if you do that). > > Jim WB6NIL > > From: adamson_alan at hotmail.com > To: app_rpt-users at ohnosec.org > Date: Sun, 3 Jun 2012 15:26:06 -0400 > Subject: [App_rpt-users] RTCM falsing DTMF > > ok, so is it normal for the RTCM to get false DTMF when voice is doing over the link? I adjusted the RX audio so that the 2 lights were off with a 3khz tone generated from a service monitor. > I see oh between 6-8 DTMF's detected over the voter channel during use?. How do you fix that issue? > Alan > > _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From bob at w5evh.org Tue Jun 5 04:38:35 2012 From: bob at w5evh.org (Bob Roszkowski) Date: Mon, 4 Jun 2012 23:38:35 -0500 Subject: [App_rpt-users] EchoLink info in CLI Message-ID: Group, I recently updated my SVN to the latest on my HUB node. It was no older than 6 months. Anyway, I monitor the status of the hub via the CLI. I was able to tell what nodes are connecting and got updates about once a few minutes that the EchoLink db was updated. After the update, I do not see anything from EchoLink in the CLI. I know it working as I can connect. When I do connect, it no longer shows the callsign of who is connecting. Is there any more info on some CLI commands for echolink. I set the debug level to 7 but I get nothing more. -- boB - W5EVH -------------- next part -------------- An HTML attachment was scrubbed... URL: From tim.sawyer at me.com Tue Jun 5 13:02:37 2012 From: tim.sawyer at me.com (Tim Sawyer) Date: Tue, 05 Jun 2012 06:02:37 -0700 Subject: [App_rpt-users] EchoLink info in CLI In-Reply-To: References: Message-ID: try using the verbose option: asterisk -rvvv -- Tim :wq On Jun 4, 2012, at 9:38 PM, Bob Roszkowski wrote: > Group, I recently updated my SVN to the latest on my HUB node. It was no older than 6 months. Anyway, I monitor the status of the hub via the CLI. I was able to tell what nodes are connecting and got updates about once a few minutes that the EchoLink db was updated. After the update, I do not see anything from EchoLink in the CLI. I know it working as I can connect. When I do connect, it no longer shows the callsign of who is connecting. Is there any more info on some CLI commands for echolink. I set the debug level to 7 but I get nothing more. > > -- > boB - W5EVH > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users From telesistant at hotmail.com Tue Jun 5 14:23:15 2012 From: telesistant at hotmail.com (Jim Duuuude) Date: Tue, 5 Jun 2012 07:23:15 -0700 Subject: [App_rpt-users] FW: Quick question on usability In-Reply-To: <4FC507EA.209@cogeco.ca> References: , , <4FC507EA.209@cogeco.ca> Message-ID: I have made good attempt at re-creating this problem, to no avail. I have 2 nodes on a development server. 2007 and 2008. I can do a *22008 on 2007 and then do a *80 on 2007 and it only goes out on 2007. Is that the scenario that you were referring to? JIM Date: Tue, 29 May 2012 13:31:22 -0400 From: jrorke at cogeco.ca CC: app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] Quick question on usability I have also observed that some ids in monitoring mode do get passed on as if I was connected in transceive mode. I seem to remember that this has been like this for some time. I guess nobody posted it to the bugs page. Jon VE3RQ On 5/29/2012 1:13 PM, Jim Duuuude wrote: No, normally (non-command) initiated ID's are always local. The problem you are (most likely) seeing is that the command (the *80) in this case is getting re-distributed to all connected nodes in the normal manner, even though the link(s) is(are) connected in monitor-only mode. Darn you for finding a design flaw!! :-) I will attempt to verify that locally-initiated commands on a monitor-connected link get distributed. If they do, they wont for long.. :-) JIM From: adamson_alan at hotmail.com To: App_rpt-users at ohnosec.org Date: Tue, 29 May 2012 13:06:25 -0400 Subject: [App_rpt-users] Quick question on usability Quick question on usability I don't want to be a bad operator at the moment? As I go about checking bandwidth and jitter, etc on my setup? I'd like to connect to an active Hub, but just in eavesdrop mode. But I've noticed that if I connect with the *2 command, that if I inadvertently then do a *80, that the ID goes out on the link that was connected with the *2. Is this true anytime my node decides to ID? Alan _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From telesistant at hotmail.com Tue Jun 5 14:27:46 2012 From: telesistant at hotmail.com (Jim Duuuude) Date: Tue, 5 Jun 2012 07:27:46 -0700 Subject: [App_rpt-users] APRS TT and APRS BEACON rate on ALLSTAR LINK.. In-Reply-To: References: , , , , Message-ID: This problem has been fixed, and the new source code for app_gps.c will be available in the public SVN update at 08:15 PDT today. Jim WB6NIL From: tom.km5vy at gmail.com Date: Mon, 4 Jun 2012 12:06:10 -0600 To: rpt2 at chuck.midlandsnetworking.com CC: kc9gqr at gmail.com; app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] APRS TT and APRS BEACON rate on ALLSTAR LINK.. On Mon, Jun 4, 2012 at 11:55 AM, Chuck Henderson wrote: Well I don't think I can enter a space using touchtone so it must need to be fixed in the app_rpt software.I am running the latest software as of May 9 2012. I'm not sure where in the C code to fix this but I think maybe it would be in gps.c sprintf(buf,"%s>APSTAR:;%s-12*%02d%02d%02dz%s%c%sA%s\n", call,theircall,tm->tm_hour,tm->tm_min,tm->tm_sec,lat,overlay,lon,comment); if theircall is less than 6 char then theircall-12 needs to be padded on the right with spaces to make it a total of 9 char in length. Yes, that's precisely where the fix needs to happen. On Mon, Jun 4, 2012 at 11:44 AM, Tom Russo wrote: On Mon, Jun 4, 2012 at 10:26 AM, Chuck Henderson wrote: APRSTT on my systems works for some call signs but not for some others. Here is an example from the aprs.fi raw log. Can anyone shed some light on why N9DOA shows up as "[Invalid object]"? Is it a problem with aprs.fi or with the code in app_rpt, or with the way I setup rpt.conf? Chuck 2012-06-04 14:05:58 UTC: WB9UUS-R>APRS,TCPIP*,qAC,CORE-2:=4030.48N/08859.28WrPHG9580/AllStar Node 27468 2012-06-04 14:06:08 UTC: WB9UUS-R>APSTAR,TCPIP*,qAC,CORE-2:;WB9UUS-12*140608z4030.38N708859.28WAAsterisk app_rpt user 2012-06-04 14:38:05 UTC: WB9UUS-R>APSTAR,TCPIP*,qAC,CORE-2:;N9DOA-12*143805z4030.28N908859.28WAAsterisk app_rpt user [Invalid object] 2012-06-04 15:00:22 UTC: WB9UUS-R>APSTAR,TCPIP*,qAC,CORE-2:;WB9UUS-12*150021z4030.38N908859.28WAAsterisk app_rpt user 2012-06-04 15:13:33 UTC: WB9UUS-R>APSTAR,TCPIP*,qAC,CORE-2:;N9DOA-12*151333z4030.28N708859.28WAAsterisk app_rpt user [Invalid object] 2012-06-04 15:52:32 UTC: WB9UUS-R>APSTAR,TCPIP*,qAC,CORE-2:;WB9UWA-12*155231z4030.18N708859.28WAAsterisk app_rpt user 2012-06-04 15:52:39 UTC: WB9UUS-R>APRS,TCPIP*,qAC,CORE-2:=4030.48N/08859.28WrPHG9580/AllStar Node 27468 The reason is that APRS object names must be padded on the right to be exactly 9 characters. WB9UUS-12 is 9 characters, but N9DOA-12 is only 8 --- you need to pad it out with spaces so the payload is: ;N9DOA-12 *151333z4030.28N708859.28WAAsterisk app_rpt user (note the extra space before the "*") -- Tom Russo KM5VY SAR502 DM64ux http://www.swcp.com/~russo/ Tijeras, NM QRPL#1592 K2#398 SOC#236 http://kevan.org/brain.cgi?DDTNM "One man alone can be pretty dumb sometimes, but for real bona fide stupidity, there ain't nothin' can beat teamwork." - Edward Abbey -- Tom Russo KM5VY SAR502 DM64ux http://www.swcp.com/~russo/ Tijeras, NM QRPL#1592 K2#398 SOC#236 http://kevan.org/brain.cgi?DDTNM "One man alone can be pretty dumb sometimes, but for real bona fide stupidity, there ain't nothin' can beat teamwork." - Edward Abbey _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From adamson_alan at hotmail.com Tue Jun 5 18:57:46 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Tue, 5 Jun 2012 14:57:46 -0400 Subject: [App_rpt-users] Quick question on usability In-Reply-To: <001701cd4327$f9254fd0$eb6fef70$@hotmail.com> References: , , <4FC507EA.209@cogeco.ca> <001701cd4327$f9254fd0$eb6fef70$@hotmail.com> Message-ID: it is, I'll have to see if I can't reproduce it and let you know. Thanks for looking at it Jim! Alan From: Jim Duuuude [mailto:telesistant at hotmail.com] Sent: Tuesday, June 05, 2012 10:23 AM To: app_rpt mailing list; adamson_alan at hotmail.com Subject: FW: [App_rpt-users] Quick question on usability I have made good attempt at re-creating this problem, to no avail. I have 2 nodes on a development server. 2007 and 2008. I can do a *22008 on 2007 and then do a *80 on 2007 and it only goes out on 2007. Is that the scenario that you were referring to? JIM _____ Date: Tue, 29 May 2012 13:31:22 -0400 From: jrorke at cogeco.ca CC: app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] Quick question on usability I have also observed that some ids in monitoring mode do get passed on as if I was connected in transceive mode. I seem to remember that this has been like this for some time. I guess nobody posted it to the bugs page. Jon VE3RQ On 5/29/2012 1:13 PM, Jim Duuuude wrote: No, normally (non-command) initiated ID's are always local. The problem you are (most likely) seeing is that the command (the *80) in this case is getting re-distributed to all connected nodes in the normal manner, even though the link(s) is(are) connected in monitor-only mode. Darn you for finding a design flaw!! :-) I will attempt to verify that locally-initiated commands on a monitor-connected link get distributed. If they do, they wont for long.. :-) JIM _____ From: adamson_alan at hotmail.com To: App_rpt-users at ohnosec.org Date: Tue, 29 May 2012 13:06:25 -0400 Subject: [App_rpt-users] Quick question on usability I don't want to be a bad operator at the moment. As I go about checking bandwidth and jitter, etc on my setup. I'd like to connect to an active Hub, but just in eavesdrop mode. But I've noticed that if I connect with the *2 command, that if I inadvertently then do a *80, that the ID goes out on the link that was connected with the *2. Is this true anytime my node decides to ID? Alan _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From rpt2 at chuck.midlandsnetworking.com Tue Jun 5 19:29:15 2012 From: rpt2 at chuck.midlandsnetworking.com (Chuck Henderson) Date: Tue, 5 Jun 2012 14:29:15 -0500 Subject: [App_rpt-users] Quick question on usability In-Reply-To: References: <4FC507EA.209@cogeco.ca> <001701cd4327$f9254fd0$eb6fef70$@hotmail.com> Message-ID: I just tried it on 27468, entering *227722, then I ID'd using my hand held radio on each repeaters input (27468, then 27722), then back on 27468 I did *80, the cwid of 27468 went out on the air of both repeaters. These 2 systems do not share any hardware. Both are running the code downloaded after the Feb 9, 2012 updates. Chuck On Tue, Jun 5, 2012 at 1:57 PM, Alan Adamson wrote: > it is, I'll have to see if I can't reproduce it and let you know.**** > > ** ** > > Thanks for looking at it Jim!**** > > Alan**** > > ** ** > > *From:* Jim Duuuude [mailto:telesistant at hotmail.com] > *Sent:* Tuesday, June 05, 2012 10:23 AM > *To:* app_rpt mailing list; adamson_alan at hotmail.com > *Subject:* FW: [App_rpt-users] Quick question on usability**** > > ** ** > > I have made good attempt at re-creating this problem, to no avail. > > I have 2 nodes on a development server. 2007 and 2008. I can do a *22008 > on 2007 and then do a *80 on 2007 > and it only goes out on 2007. Is that the scenario that you were referring > to? > > JIM**** > ------------------------------ > > Date: Tue, 29 May 2012 13:31:22 -0400 > From: jrorke at cogeco.ca > CC: app_rpt-users at ohnosec.org > Subject: Re: [App_rpt-users] Quick question on usability > > > I have also observed that some ids in monitoring mode do get passed on as > if I was connected in transceive mode. > > I seem to remember that this has been like this for some time. I guess > nobody posted it to the bugs page. > > Jon VE3RQ > > On 5/29/2012 1:13 PM, Jim Duuuude wrote: **** > > No, normally (non-command) initiated ID's are always local. > > The problem you are (most likely) seeing is that the command (the *80) in > this case is getting > re-distributed to all connected nodes in the normal manner, even though > the link(s) > is(are) connected in monitor-only mode. > > Darn you for finding a design flaw!! :-) > > I will attempt to verify that locally-initiated commands on a > monitor-connected link > get distributed. If they do, they wont for long.. :-) > > JIM > ** > ****** > ------------------------------ > > From: adamson_alan at hotmail.com > To: App_rpt-users at ohnosec.org > Date: Tue, 29 May 2012 13:06:25 -0400 > Subject: [App_rpt-users] Quick question on usability**** > > I don't want to be a bad operator at the moment? As I go about checking > bandwidth and jitter, etc on my setup? I'd like to connect to an active > Hub, but just in eavesdrop mode.**** > > But I've noticed that if I connect with the *2 command, that if I > inadvertently then do a *80, that the ID goes out on the link that was > connected with the *2.**** > > Is this true anytime my node decides to ID?**** > > Alan**** > > > _______________________________________________ App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users**** > > > ** > ****** > > _______________________________________________**** > > App_rpt-users mailing list**** > > App_rpt-users at ohnosec.org**** > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users**** > > > _______________________________________________ App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users**** > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From n3fe at repeater.net Wed Jun 6 00:28:14 2012 From: n3fe at repeater.net (Corey Dean) Date: Tue, 5 Jun 2012 20:28:14 -0400 Subject: [App_rpt-users] Quick question on usability In-Reply-To: References: <4FC507EA.209@cogeco.ca> <001701cd4327$f9254fd0$eb6fef70$@hotmail.com> , Message-ID: <4BCC91CBCFD66C4489B4BD3233140C3E03C7431A1082@exchange.mail.repeater.net> I have one acid box that I had the win system on receive only recently to show some out of area hams how things sounded! They were impressed. This was a default install so I could show the differences in the two distros. With the node in receive only and hitting the touch tone to call up the ID, it also went over the win system while I was in receive only. Of course someone copied the CW and told me my repeater was id'ing on the 'reflector'. I just disconnected. Normally I change it to id locally only when called by touch tones. Corey N3FE ________________________________________ From: app_rpt-users-bounces at ohnosec.org [app_rpt-users-bounces at ohnosec.org] On Behalf Of Chuck Henderson [rpt2 at chuck.midlandsnetworking.com] Sent: Tuesday, June 05, 2012 3:29 PM To: Alan Adamson Cc: app_rpt mailing list Subject: Re: [App_rpt-users] Quick question on usability I just tried it on 27468, entering *227722, then I ID'd using my hand held radio on each repeaters input (27468, then 27722), then back on 27468 I did *80, the cwid of 27468 went out on the air of both repeaters. These 2 systems do not share any hardware. Both are running the code downloaded after the Feb 9, 2012 updates. Chuck On Tue, Jun 5, 2012 at 1:57 PM, Alan Adamson > wrote: it is, I'll have to see if I can't reproduce it and let you know. Thanks for looking at it Jim! Alan From: Jim Duuuude [mailto:telesistant at hotmail.com] Sent: Tuesday, June 05, 2012 10:23 AM To: app_rpt mailing list; adamson_alan at hotmail.com Subject: FW: [App_rpt-users] Quick question on usability I have made good attempt at re-creating this problem, to no avail. I have 2 nodes on a development server. 2007 and 2008. I can do a *22008 on 2007 and then do a *80 on 2007 and it only goes out on 2007. Is that the scenario that you were referring to? JIM ________________________________ Date: Tue, 29 May 2012 13:31:22 -0400 From: jrorke at cogeco.ca CC: app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] Quick question on usability I have also observed that some ids in monitoring mode do get passed on as if I was connected in transceive mode. I seem to remember that this has been like this for some time. I guess nobody posted it to the bugs page. Jon VE3RQ On 5/29/2012 1:13 PM, Jim Duuuude wrote: No, normally (non-command) initiated ID's are always local. The problem you are (most likely) seeing is that the command (the *80) in this case is getting re-distributed to all connected nodes in the normal manner, even though the link(s) is(are) connected in monitor-only mode. Darn you for finding a design flaw!! :-) I will attempt to verify that locally-initiated commands on a monitor-connected link get distributed. If they do, they wont for long.. :-) JIM ________________________________ From: adamson_alan at hotmail.com To: App_rpt-users at ohnosec.org Date: Tue, 29 May 2012 13:06:25 -0400 Subject: [App_rpt-users] Quick question on usability I don't want to be a bad operator at the moment? As I go about checking bandwidth and jitter, etc on my setup? I'd like to connect to an active Hub, but just in eavesdrop mode. But I've noticed that if I connect with the *2 command, that if I inadvertently then do a *80, that the ID goes out on the link that was connected with the *2. Is this true anytime my node decides to ID? Alan _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -- This message was scanned and is believed to be clean. Click here to report this message as spam. From adamson_alan at hotmail.com Wed Jun 6 02:21:00 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Tue, 5 Jun 2012 22:21:00 -0400 Subject: [App_rpt-users] Pickle and LOX Message-ID: Ok, so what gives, the mac address on the Beagleboard changes every time I reboot it. I can't lock and IP address to it via MAC to IP address assignment in my DHCP server as a result :(. Is this normal, is there a way to stop it from re-enumerating the ethernet port over usb? Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From adamson_alan at hotmail.com Wed Jun 6 03:21:11 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Tue, 5 Jun 2012 23:21:11 -0400 Subject: [App_rpt-users] Pickle and LOX In-Reply-To: <011101cd438d$87acf040$9706d0c0$@gmail.com> References: <011101cd438d$87acf040$9706d0c0$@gmail.com> Message-ID: Yep, done, bummer I had having static address in devices, much easier to move thing around with mac to ip mapping? Alan From: Neal Garbenis [mailto:njgarbenis at gmail.com] Sent: Tuesday, June 05, 2012 10:32 PM To: Alan Adamson Subject: Re: [App_rpt-users] Pickle and LOX Set it as a static ip this will solve your problem Neal Garbenis Jr. NG8Y On Jun 5, 2012, at 10:21 PM, Alan Adamson wrote: Ok, so what gives, the mac address on the Beagleboard changes every time I reboot it? I can't lock and IP address to it via MAC to IP address assignment in my DHCP server as a result :(? Is this normal, is there a way to stop it from re-enumerating the ethernet port over usb? Alan _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From kp4tr.ramon at gmail.com Wed Jun 6 04:24:12 2012 From: kp4tr.ramon at gmail.com ((KP4TR)Ramon Gonzalez) Date: Wed, 06 Jun 2012 00:24:12 -0400 Subject: [App_rpt-users] Question about DMK URL and DTMF Message-ID: <4FCEDB6C.6050509@gmail.com> Hello, I recently got my node up and working great, but it was using an old IRLP board for PTT and COS. Today I got a DMK URI USB FOB and replace it, and it works fine. The only problem I have is with certain DTMF commands. For example, I can connect to another node and all works fine. But I am unable to disconnect. Looking at the log files, the DTMF sequence is being recognized ok. Simply the commands are being ignored. If I try to disconnect, it does nothing. But a status *70 works ok. Even trying to connect another node while being connected doesn't work. It works only if I am not connected to anyone. Anybody recognize this symptom? Thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL: From kc9gqr at gmail.com Wed Jun 6 16:20:31 2012 From: kc9gqr at gmail.com (Bradley Haney) Date: Wed, 6 Jun 2012 11:20:31 -0500 Subject: [App_rpt-users] audio quaility Message-ID: Was wondering if there is an EQ or something like to raise the high level in the audio. Our audio from ithe internet going out RF sounds a little muffled and on the low sounding side.. Maybe i just need to tap a different output on the repeater but didn't know if there was a software setting to raise the high end to make it sound a little more natural. Bradley From ke6sth at ke6sth.ampr.org Wed Jun 6 16:23:24 2012 From: ke6sth at ke6sth.ampr.org (Sione Ragle) Date: Wed, 06 Jun 2012 09:23:24 -0700 Subject: [App_rpt-users] RTCM falsing DTMF In-Reply-To: <4BFC5069-D107-4C0D-923D-C58D3D1BC79A@me.com> References: <7C76EA27-4415-4796-97CD-7B92F1169BA5@me.com> <696D3DB4-ABC0-470A-A65D-27923E057431@me.com> <00a101cd42af$d7891e10$869b5a30$@cs.com> <4BFC5069-D107-4C0D-923D-C58D3D1BC79A@me.com> Message-ID: <4FCF83FC.7050202@ke6sth.ampr.org> That worked, no more people's audio getting muted :) Thanks! --Sione On 6/4/2012 7:33 PM, Tim Sawyer wrote: > In simpleusb.conf or voter.conf or as in your case, usbradio.conf you > can add a statement: > > plfilter = yes > > which will place a 300Hz high pass filter on the receive audio. > -- > Tim > :wq > > On Jun 4, 2012, at 5:12 PM, Ken wrote: > >> Tim -- what do you mean by "filtering PL"? >> Do you just meanctcssfrom=dsp >> Or is it something else? >> Ken >> *From:*app_rpt-users-bounces at ohnosec.org >> >> [mailto:app_rpt-users-bounces at ohnosec.org]*On Behalf Of*Tim Sawyer >> *Sent:*Monday, June 04, 2012 11:10 AM >> *To:*Chuck Henderson >> *Cc:*app_rpt mailing list >> *Subject:*Re: [App_rpt-users] RTCM falsing DTMF >> What one says on the internet never goes away. I posted that before I >> found that not filtering PL was causing a problem. That older post is >> still valid if RADIO_RELAX is too loose for your system. >> -- >> Tim >> :wq >> On Jun 3, 2012, at 10:00 PM, Chuck Henderson wrote: >> >> >> // My fix for the DTMF falsing problem is to make one change to the >> file dsp.c >> // /usr/src/trunk/asterisk/main/dsp.c >> // Change this line in dsp.c (find the line by searching for 26.0) >> #define DTMF_TO_TOTAL_ENERGY ((digitmode & >> DSP_DIGITMODE_RELAXDTMF) ? 26.0 : 42.0) >> // To look like this line >> #define DTMF_TO_TOTAL_ENERGY ((digitmode & >> DSP_DIGITMODE_RELAXDTMF) ? 38.0 : 42.0) >> // The result for our 2 repeaters, >> // one on VHF using the USB fob, >> // and the other on UHF using multiple RTCM's, >> // is a reduction of DTMF falsing from hundreds per day to only 2 or >> 3 per day and >> // no problems decoding DTMF. >> // I do not turn off RADIO_RELAX because doing so caused problems >> with DTMF decode. >> // The only problem with my fix is that I have to re-edit dsp.c >> every time I update. >> // Remember to do the usual "makes" after editing this file. >> On Sun, Jun 3, 2012 at 4:01 PM, Tim Sawyer > > wrote: >> First I would update from svn, might as well as you have to recompile >> anyway. The instructions to update from svn are at >> https://allstarlink.org/support.html#astupgrade >> Before you do the make up grade edit >> /usr/src/astsrc/asterisk/menuselect.makeopts >> change the line that says >> MENUSELECT_CFLAGS=RADIO_RELAX LOADABLE_MODULES >> to >> MENUSELECT_CFLAGS=LOADABLE_MODULES >> then do make upgrade or make upgrade-acid as appropriate. >> -- >> Tim >> :wq >> On Jun 3, 2012, at 1:51 PM, Tim Sawyer wrote: >> >> >> I am one of those that found setting RADIO_RELAX off works much >> better. TT falsing has been reduced to near zero and decoding is >> still as fast as I can push the buttons. >> One thing I found was that I had to turn on the PL filter. Before I >> did that TT decoding was unbearably show with RADIO_RELAX off. >> -- >> Tim >> :wq >> On Jun 3, 2012, at 12:48 PM, Jim Duuuude wrote: >> >> >> This has nothing to do with the RTCM. The DTMF receiver is the same >> one that is used in all the other >> channel drivers for the other types of interfaces also. >> >> When the app_rpt stuff was first being developed (10+ years ago), the >> default parameters >> for the DTMF receiver seemed too "tight" for radio use. There were a >> number of combinations >> that were found of receivers and transmitting devices (HT's mobiles, >> etc) that did not seem to >> work reliably with the parameters the way they were, so we developed >> the "RADIO_RELAX" set >> of parameters, which are more "relaxed" then the normal ones. >> >> As time has gone on, there have been cases where using these >> "relaxed" parameters have seemed >> to do more harm then good. I dont know if your case is one of those. >> If you wish to try, I suggest >> re-compiling Asterisk with the RADIO_RELAX compile parameter turned >> off, and see if you like it >> that way better. I can guarantee you that you will have less >> "falsing" if you do that. What I can not >> guarantee is that you will get all the "real" digits decoded reliably >> (if you do that). >> >> Jim WB6NIL >> >> ------------------------------------------------------------------------ >> >> From:adamson_alan at hotmail.com >> To:app_rpt-users at ohnosec.org >> Date: Sun, 3 Jun 2012 15:26:06 -0400 >> Subject: [App_rpt-users] RTCM falsing DTMF >> >> ok, so is it normal for the RTCM to get false DTMF when voice is >> doing over the link? I adjusted the RX audio so that the >> 2lights were off with a 3khz tone generated from a service monitor. >> I see oh between 6-8 DTMF's detected over the voter channel during >> use.... How do you fix that issue? >> Alan >> >> _______________________________________________ App_rpt-users mailing >> listApp_rpt-users at ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From kuggie at kuggie.com Wed Jun 6 19:12:24 2012 From: kuggie at kuggie.com (Kevin Custer) Date: Wed, 06 Jun 2012 15:12:24 -0400 Subject: [App_rpt-users] audio quaility In-Reply-To: References: Message-ID: <4FCFAB98.7090200@kuggie.com> Bradley, There are settings in the program to select the type of audio being delivered from the receiver to the box and the type of audio being delivered from the box to the transmitter. Since you only indicate an issue with poor audio quality from the box out your local transmitter, my feeling is that you have the wrong type of audio selected in the urd file. You need to change to "txprelim=1" so to pre-emphasize and limit in the audio going to the transmitter. What are you using for an audio interface (URI, FOB, VOTER) and what type of repeater do you have? Kevin > Was wondering if there is an EQ or something like to raise the high level in the audio. Our audio from the internet going out RF sounds a little muffled and on the low sounding side.. Maybe i just need to tap a different output on the repeater but didn't know if there was a software setting to raise the high end to make it sound a little more natural. > Bradley From adamson_alan at hotmail.com Thu Jun 7 02:42:23 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Wed, 6 Jun 2012 22:42:23 -0400 Subject: [App_rpt-users] Ok, this was puzzling. Message-ID: I have a full duplex connection between my allstar server and my repeater via a RTCM acting just as a ROIP box, not a voter. When I connect that node to another node on my box and then connect it in *command mode*, it causes the repeater to stay keyed down even though I'm not bringing it up via the repeater input .. UNTIL I finish the command mode and press the "#", then it go back to tracking the repeater input. Is this normal? It works in all other modes as you would expect so no it's not an inverted COR, etc. It only does this when you put a node that's connected to the repeater node into command mode. Very bizarre. it works just fine because I'm in full duplex, but it did surprise me the first time and I never saw the PTT drop on the repeater even though I wasn't on the input of the repeater (COR wasn't active). I'm not sure if this is from the RTCM, or the allstar server, or as a result of the command mode. I know it does not do this when the node is a half duplex node Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From kb2ear at kb2ear.net Thu Jun 7 03:37:27 2012 From: kb2ear at kb2ear.net (Scott Weis) Date: Wed, 6 Jun 2012 23:37:27 -0400 Subject: [App_rpt-users] Ok, this was puzzling. In-Reply-To: References: Message-ID: <022e01cd445e$dc5a9170$950fb450$@kb2ear.net> It's normal, while in remote control mode the controlling node stays keyed until the #. From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Alan Adamson Sent: Wednesday, June 06, 2012 10:42 PM To: 'app_rpt mailing list' Subject: [App_rpt-users] Ok, this was puzzling. I have a full duplex connection between my allstar server and my repeater via a RTCM acting just as a ROIP box, not a voter. When I connect that node to another node on my box and then connect it in *command mode*, it causes the repeater to stay keyed down even though I'm not bringing it up via the repeater input .. UNTIL I finish the command mode and press the "#", then it go back to tracking the repeater input. Is this normal? It works in all other modes as you would expect so no it's not an inverted COR, etc. It only does this when you put a node that's connected to the repeater node into command mode. Very bizarre. it works just fine because I'm in full duplex, but it did surprise me the first time and I never saw the PTT drop on the repeater even though I wasn't on the input of the repeater (COR wasn't active). I'm not sure if this is from the RTCM, or the allstar server, or as a result of the command mode. I know it does not do this when the node is a half duplex node Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From adamson_alan at hotmail.com Thu Jun 7 03:50:35 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Wed, 6 Jun 2012 23:50:35 -0400 Subject: [App_rpt-users] Ok, this was puzzling. In-Reply-To: <022e01cd445e$dc5a9170$950fb450$@kb2ear.net> References: <022e01cd445e$dc5a9170$950fb450$@kb2ear.net> Message-ID: Thanks Scott! I kinda figured as much, but it was the first time I noticed it. Alan From: Scott Weis [mailto:kb2ear at kb2ear.net] Sent: Wednesday, June 06, 2012 11:37 PM To: 'Alan Adamson'; 'app_rpt mailing list' Subject: RE: [App_rpt-users] Ok, this was puzzling. It's normal, while in remote control mode the controlling node stays keyed until the #. From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Alan Adamson Sent: Wednesday, June 06, 2012 10:42 PM To: 'app_rpt mailing list' Subject: [App_rpt-users] Ok, this was puzzling. I have a full duplex connection between my allstar server and my repeater via a RTCM acting just as a ROIP box, not a voter. When I connect that node to another node on my box and then connect it in *command mode*, it causes the repeater to stay keyed down even though I'm not bringing it up via the repeater input .. UNTIL I finish the command mode and press the "#", then it go back to tracking the repeater input. Is this normal? It works in all other modes as you would expect so no it's not an inverted COR, etc. It only does this when you put a node that's connected to the repeater node into command mode. Very bizarre. it works just fine because I'm in full duplex, but it did surprise me the first time and I never saw the PTT drop on the repeater even though I wasn't on the input of the repeater (COR wasn't active). I'm not sure if this is from the RTCM, or the allstar server, or as a result of the command mode. I know it does not do this when the node is a half duplex node Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From adamson_alan at hotmail.com Thu Jun 7 23:02:47 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Thu, 7 Jun 2012 19:02:47 -0400 Subject: [App_rpt-users] New question of that day Message-ID: How are people serving live audio to the web off an allstar server? Via a scanner or other radio, or is there a way to get an combined audio out on the servers sound system that can be encoded for live broadcast? Just curious, can't be the first to have asked this question. Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From ke2n at cs.com Fri Jun 8 00:54:41 2012 From: ke2n at cs.com (Ken) Date: Thu, 7 Jun 2012 20:54:41 -0400 Subject: [App_rpt-users] New question of that day In-Reply-To: References: Message-ID: <006d01cd4511$49cdb130$dd691390$@cs.com> Look at the posts in May, where you will see a description of Icecast and shoutcast streaming using the acid-stream feature .. Outstreamcmd= Ken From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Alan Adamson Sent: Thursday, June 07, 2012 7:03 PM To: 'app_rpt mailing list' Subject: [App_rpt-users] New question of that day How are people serving live audio to the web off an allstar server? Via a scanner or other radio, or is there a way to get an combined audio out on the servers sound system that can be encoded for live broadcast? Just curious, can't be the first to have asked this question. Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From adamson_alan at hotmail.com Fri Jun 8 01:13:40 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Thu, 7 Jun 2012 21:13:40 -0400 Subject: [App_rpt-users] New question of that day In-Reply-To: <024501cd4511$d59a9250$80cfb6f0$@cs.com> References: <024501cd4511$d59a9250$80cfb6f0$@cs.com> Message-ID: Ok, now that is just too bloody cool.. Up and streaming. for now just hosted on my own icecast server :) Alan From: Ken [mailto:ke2n at cs.com] Sent: Thursday, June 07, 2012 8:55 PM To: 'Alan Adamson'; 'app_rpt mailing list' Subject: RE: [App_rpt-users] New question of that day Look at the posts in May, where you will see a description of Icecast and shoutcast streaming using the acid-stream feature .. Outstreamcmd= Ken From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Alan Adamson Sent: Thursday, June 07, 2012 7:03 PM To: 'app_rpt mailing list' Subject: [App_rpt-users] New question of that day How are people serving live audio to the web off an allstar server? Via a scanner or other radio, or is there a way to get an combined audio out on the servers sound system that can be encoded for live broadcast? Just curious, can't be the first to have asked this question. Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From adamson_alan at hotmail.com Fri Jun 8 16:16:56 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Fri, 8 Jun 2012 12:16:56 -0400 Subject: [App_rpt-users] Double ID's Message-ID: HMM. NOTE, I've recently updated to the latest svn and since then noticed this. Anyone noticed that on an initial ID after setting idle for some time, when you have 2 nodes connected. When a signal comes in on the remote node, it causes the local node to start the ID, about 2/3 through, it cuts off the first one and immediately generates a second as if it were one complete ID. Doesn't do it all the time. .. Any idea what change in the code may have done this? Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From telesistant at hotmail.com Fri Jun 8 16:26:16 2012 From: telesistant at hotmail.com (Jim Duuuude) Date: Fri, 8 Jun 2012 09:26:16 -0700 Subject: [App_rpt-users] Double ID's In-Reply-To: References: Message-ID: IF you have idrecording set to a morse id, leave idtalkover unset Jim WB6NIL From: adamson_alan at hotmail.com To: app_rpt-users at ohnosec.org Date: Fri, 8 Jun 2012 12:16:56 -0400 Subject: [App_rpt-users] Double ID's Double ID's HMM? NOTE, I've recently updated to the latest svn and since then noticed this? Anyone noticed that on an initial ID after setting idle for some time, when you have 2 nodes connected. When a signal comes in on the remote node, it causes the local node to start the ID, about 2/3 through, it cuts off the first one and immediately generates a second as if it were one complete ID. Doesn't do it all the time? ?. Any idea what change in the code may have done this? Alan _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From buddy at brannan.name Fri Jun 8 16:38:22 2012 From: buddy at brannan.name (Buddy Brannan) Date: Fri, 8 Jun 2012 12:38:22 -0400 Subject: [App_rpt-users] Double ID's In-Reply-To: References: Message-ID: <653CA443-AD04-4376-A85F-1EE2C7F7CFAF@brannan.name> This is a sort of long-standing thing, I'm also still seeing it. You'll get the talk over ID folioed by the regular ID, though not every time. -- Buddy Brannan, KB5ELV - Erie, PA Phone: (814) 860-3194 or 888-75-BUDDY On Jun 8, 2012, at 12:16 PM, Alan Adamson wrote: > HMM? > > NOTE, I've recently updated to the latest svn and since then noticed this? > > Anyone noticed that on an initial ID after setting idle for some time, when you have 2 nodes connected. When a signal comes in on the remote node, it causes the local node to start the ID, about 2/3 through, it cuts off the first one and immediately generates a second as if it were one complete ID. > > > Doesn't do it all the time? ?. > > Any idea what change in the code may have done this? > > Alan > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users From kt9ac at ameritech.net Fri Jun 8 16:50:34 2012 From: kt9ac at ameritech.net (Tony KT9AC) Date: Fri, 8 Jun 2012 09:50:34 -0700 (PDT) Subject: [App_rpt-users] Double ID's In-Reply-To: <653CA443-AD04-4376-A85F-1EE2C7F7CFAF@brannan.name> Message-ID: <1339174234.72960.YahooMailClassic@web181511.mail.ne1.yahoo.com> It's been like this for a while now (check the archives). Just comment out the "talkover" one. --- On Fri, 6/8/12, Buddy Brannan wrote: > From: Buddy Brannan > Subject: Re: [App_rpt-users] Double ID's > To: "app_rpt mailing list" > Date: Friday, June 8, 2012, 11:38 AM > This is a sort of long-standing > thing, I'm also still seeing it. You'll get the talk over ID > folioed by the regular ID, though not every time. > -- > Buddy Brannan, KB5ELV - Erie, PA > Phone: (814) 860-3194 or 888-75-BUDDY > > > > On Jun 8, 2012, at 12:16 PM, Alan Adamson > wrote: > > > HMM? > > > > NOTE, I've recently updated to the latest svn and since > then noticed this? > > > > Anyone noticed that on an initial ID after setting idle > for some time, when you have 2 nodes connected.? When a > signal comes in on the remote node, it causes the local node > to start the ID, about 2/3 through, it cuts off the first > one and immediately generates a second as if it were one > complete ID. > > > > > > Doesn't do it all the time? ?. > > > > Any idea what change in the code may have done this? > > > > Alan > > > > > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users at ohnosec.org > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > From adamson_alan at hotmail.com Fri Jun 8 16:59:34 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Fri, 8 Jun 2012 12:59:34 -0400 Subject: [App_rpt-users] Double ID's In-Reply-To: <015101cd4597$b89b0dc0$29d12940$@ameritech.net> References: <653CA443-AD04-4376-A85F-1EE2C7F7CFAF@brannan.name> <015101cd4597$b89b0dc0$29d12940$@ameritech.net> Message-ID: Funny I never noticed it until I really got my repeater on the air... glad it was a simple fix, didn't even thing about checking the archives... My bad there... :). (wish I knew of a way to search on the archives).... All rpt.conf sections fixed with commented out talkovers... Thanks all. Alan -----Original Message----- From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Tony KT9AC Sent: Friday, June 08, 2012 12:51 PM To: app_rpt mailing list; Buddy Brannan Subject: Re: [App_rpt-users] Double ID's It's been like this for a while now (check the archives). Just comment out the "talkover" one. --- On Fri, 6/8/12, Buddy Brannan wrote: > From: Buddy Brannan > Subject: Re: [App_rpt-users] Double ID's > To: "app_rpt mailing list" > Date: Friday, June 8, 2012, 11:38 AM > This is a sort of long-standing > thing, I'm also still seeing it. You'll get the talk over ID > folioed by the regular ID, though not every time. > -- > Buddy Brannan, KB5ELV - Erie, PA > Phone: (814) 860-3194 or 888-75-BUDDY > > > > On Jun 8, 2012, at 12:16 PM, Alan Adamson > wrote: > > > HMM? > > > > NOTE, I've recently updated to the latest svn and since > then noticed this? > > > > Anyone noticed that on an initial ID after setting idle > for some time, when you have 2 nodes connected. When a > signal comes in on the remote node, it causes the local node > to start the ID, about 2/3 through, it cuts off the first > one and immediately generates a second as if it were one > complete ID. > > > > > > Doesn't do it all the time? ?. > > > > Any idea what change in the code may have done this? > > > > Alan > > > > > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users at ohnosec.org > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users From n9gmr at me.com Sat Jun 9 02:25:45 2012 From: n9gmr at me.com (Matt Roberts) Date: Fri, 08 Jun 2012 22:25:45 -0400 Subject: [App_rpt-users] Thinking out loud In-Reply-To: References: Message-ID: <7EA10F25-C684-4F0C-8A63-4E4B2513648F@me.com> Will the RTCM work with a mobile WIFI hotspot? Matt Roberts n9gmr at me.com Sent from my iPhone On Jun 3, 2012, at 12:13 PM, Jim Duuuude wrote: > well, yes, that was exactly one of the things it was designed for... > > On the way to Dayton recently, we (Mark K7IZA, Hans AE6TV and I) had exactly that.. An RTCM > connected to a cradlepoint router with a T-mobile USB datacard and a Motorola HT on a 440 > channel. It worked very well. > > And for this type of an application, if you REALLY want a "no brainer" setup, Micro-Node > offers a subscription-based hosting platform for Allstar Nodes using an RTCM in this manner. > In other words, for people who just want a simple, hassle-free mobile/portable node without > having to "hassle" with a Linux host, etc, they can also buy the service through Mark's company. > > Regardless of how you host the node, having the RTCM in a mobile/portable environment is > a GREAT way to go. Its low power consumption (72ma @ 12VDC), small size, and general > ruggedness, not to mention its very simple requirements for Internet connectivity (including > its ability to be behind any number of NATs, etc) make it the optimum solution for this type > of operation. > > I highly recommend you giving this a try. You will definitely like it. > > BTW, I am in the process of getting access to a picture of the device we took with us to > Dayton, and will post it once I get it. > > JIM WB6NIL > > > From: adamson_alan at hotmail.com > To: app_rpt-users at ohnosec.org > Date: Sun, 3 Jun 2012 10:02:31 -0400 > Subject: [App_rpt-users] Thinking out loud > > I've been wanting to build a *mobile* node. On the surface, this seems pretty easy? What makes it complicated is the internet or network connections. > > > I'm a tmobile subscriber for cell and mobile data. I decided recently to start building my mobile data carry alongs based upon a cradlepoint router, so far so good. So my Tmobile mobile device is comprised of a cradlepoint, and their 4G usb FOB. This works great for what I need it for?. Recently I found myself in an area where I didn't have very good tmo coverage so I grabbed a Verizon 4G lte FOB. I haven't thought about *incoming* data until working on my linking projects. > > > This is where my mobile plan fell apart. > > It appears that most all of these 4G/LTE providers are going to a Natted private network on the 4G/LTE side. This isn't true of their 3G network, but is of their 4G side. Well as you might imagine if you don't have control of the NAT ad port forwarding, you can't put a server on user side of a 4G device :(. > > BUT then I had an epiphany (probably late because everyone else is already there)? > > The RTCM works so well for remoting my repeater?. Why not just use it as the mobile controller and instead of running a server remotely, just run an RTCM remotely back to a server. I think this will solve my problem. And perhaps make this even simpler to deal with along with a 4G type data connection. > > Anyone already wandered this path and what are you using? > > > Thanks, > > Alan > > > _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From bdboyle at bdboyle.com Sat Jun 9 02:38:39 2012 From: bdboyle at bdboyle.com (Bryan D. Boyle) Date: Fri, 08 Jun 2012 22:38:39 -0400 Subject: [App_rpt-users] Thinking out loud In-Reply-To: <7EA10F25-C684-4F0C-8A63-4E4B2513648F@me.com> References: <7EA10F25-C684-4F0C-8A63-4E4B2513648F@me.com> Message-ID: <4FD2B72F.8030209@bdboyle.com> On 6/8/2012 10:25 PM, Matt Roberts wrote: > Will the RTCM work with a mobile WIFI hotspot? > If the hotspot doesn't have an ethernet port, you'll need something like the Netgear WNCE2001 wireless bridge to get the RTCM to make the hop. And if your hotspot is not on an unlimited dataplan (as well as being at least capable of high 3G or pseudo-4G speeds), you will rapidly eat through your monthly allotment as well as not being entirely pleased with the audio quality. I have the above netgear unit on my remoterig for my TS480 setup, and while it is useable...it's not 100% reliable, certainly not at the same level you've come to expect (or not, depending on where and what your current wired service give you) from a hard link. BB WB0YLE From n9gmr at me.com Sat Jun 9 09:48:35 2012 From: n9gmr at me.com (Matt Roberts) Date: Sat, 09 Jun 2012 05:48:35 -0400 Subject: [App_rpt-users] Open Remote Bases? Message-ID: I've had several users ask about remote bases on my repeater. Does anyone have open ones? I know this is a touchy subject, but when you look at the node list, you don't know if the nodes are open or if you need a password. Matt Roberts n9gmr at me.com Call Sign N9GMR IRLP 4515 EchoLink 640860 Allstar 28142 From n3fe at repeater.net Sat Jun 9 12:40:58 2012 From: n3fe at repeater.net (Corey Dean) Date: Sat, 9 Jun 2012 08:40:58 -0400 Subject: [App_rpt-users] Open Remote Bases? In-Reply-To: References: Message-ID: <4BCC91CBCFD66C4489B4BD3233140C3E03C7431A108B@exchange.mail.repeater.net> I was actually thinking about this the other day. I have thought about setting one up but haven't got around to it yet. I don't even have the radio yet. Corey N3FE ________________________________________ From: app_rpt-users-bounces at ohnosec.org [app_rpt-users-bounces at ohnosec.org] On Behalf Of Matt Roberts [n9gmr at me.com] Sent: Saturday, June 09, 2012 5:48 AM To: app_rpt-users at ohnosec.org Subject: [App_rpt-users] Open Remote Bases? I've had several users ask about remote bases on my repeater. Does anyone have open ones? I know this is a touchy subject, but when you look at the node list, you don't know if the nodes are open or if you need a password. Matt Roberts n9gmr at me.com Call Sign N9GMR IRLP 4515 EchoLink 640860 Allstar 28142 _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -- This message was scanned and is believed to be clean. Click here to report this message as spam. http://simba.repeater.net/cgi-bin/learn-msg.cgi?id=D2DA72249.A8D16 From george at dyb.com Sat Jun 9 16:24:53 2012 From: george at dyb.com (George Csahanin) Date: Sat, 9 Jun 2012 11:24:53 -0500 Subject: [App_rpt-users] Open Remote Bases? References: Message-ID: Control operator issue??? GC ----- Original Message ----- From: "Matt Roberts" To: Sent: Saturday, June 09, 2012 4:48 AM Subject: [App_rpt-users] Open Remote Bases? > I've had several users ask about remote bases on my repeater. Does anyone > have open ones? I know this is a touchy subject, but when you look at the > node list, you don't know if the nodes are open or if you need a password. > > > Matt Roberts > n9gmr at me.com > Call Sign N9GMR > IRLP 4515 > EchoLink 640860 > Allstar 28142 > > > From adamson_alan at hotmail.com Sat Jun 9 16:27:24 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Sat, 9 Jun 2012 12:27:24 -0400 Subject: [App_rpt-users] Features/bugs Message-ID: Just curious, is there a bug tracking db to enter either bugs or feature requests? Some like Mantis, bugzilla, etc? On the feature request front. I've got a small one. A) it might be nice to have the ability enable or disable the RTCM either from a hardware pin (letting the controller in a repeater do it), or by some DTMF pattern - unique to the RTCM. I had a case where I has setup the offline mode and tested it as best as I could. It got in a mode where it was going off and back on line (not and RTCM issue, it was related to how I did my internet too it), and the way I had it configured, it was IDing, every time the connection failed for restored. (on about 5 second intervals). This happened once I was *away* from the site. I'd have loved the ability to remotely have shut off the RTCM but couldn't figure out a way to do that. Luckily I had to go back to the site the next day so I fixed my issue and reconfigured the offline mode slightly. I've kinda acid tested one of these from the connection resilience standpoint. Been running it on a somewhat flakey 4G connection that cycles connectivity quite frequently. Needless to say, the RTCM has been a rock and it's been through some very strange states :). The most strange is one where the connectivity back to it is still partially there, but as a result, it cycles the PTT on the repeater at about every syllable.. very interesting behavior, but not a bug, it's doing exactly what it should be. and as soon as connectivity comes back fully, it's just keeps on keeping on. All of this will go away as I'm about 24 hours away from having real hardwired inet at the sight, but it has proved to me that this is gonna work just great in a mobile install as another node that I'll host on my allstar server. Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From ke2n at cs.com Sat Jun 9 17:06:17 2012 From: ke2n at cs.com (Ken) Date: Sat, 9 Jun 2012 13:06:17 -0400 Subject: [App_rpt-users] Features/bugs In-Reply-To: References: Message-ID: <000901cd4662$2f207cd0$8d617670$@cs.com> If you look at the bottom of this page http://ohnosec.org/drupal/node/3 you will see where you can sign up to report bugs - it's called mantis 73 ken From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Alan Adamson Sent: Saturday, June 09, 2012 12:27 PM To: 'app_rpt mailing list' Subject: [App_rpt-users] Features/bugs Just curious, is there a bug tracking db to enter either bugs or feature requests? Some like Mantis, bugzilla, etc? On the feature request front. I've got a small one. A) it might be nice to have the ability enable or disable the RTCM either from a hardware pin (letting the controller in a repeater do it), or by some DTMF pattern - unique to the RTCM. I had a case where I has setup the offline mode and tested it as best as I could. It got in a mode where it was going off and back on line (not and RTCM issue, it was related to how I did my internet too it), and the way I had it configured, it was IDing, every time the connection failed for restored. (on about 5 second intervals). This happened once I was *away* from the site. I'd have loved the ability to remotely have shut off the RTCM but couldn't figure out a way to do that. Luckily I had to go back to the site the next day so I fixed my issue and reconfigured the offline mode slightly. I've kinda acid tested one of these from the connection resilience standpoint. Been running it on a somewhat flakey 4G connection that cycles connectivity quite frequently. Needless to say, the RTCM has been a rock and it's been through some very strange states :). The most strange is one where the connectivity back to it is still partially there, but as a result, it cycles the PTT on the repeater at about every syllable.. very interesting behavior, but not a bug, it's doing exactly what it should be. and as soon as connectivity comes back fully, it's just keeps on keeping on. All of this will go away as I'm about 24 hours away from having real hardwired inet at the sight, but it has proved to me that this is gonna work just great in a mobile install as another node that I'll host on my allstar server. Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From bdboyle at bdboyle.com Sat Jun 9 17:34:49 2012 From: bdboyle at bdboyle.com (Bryan D. Boyle) Date: Sat, 9 Jun 2012 13:34:49 -0400 Subject: [App_rpt-users] Features/bugs In-Reply-To: <000901cd4662$2f207cd0$8d617670$@cs.com> References: <000901cd4662$2f207cd0$8d617670$@cs.com> Message-ID: <0E2ECFA9-59E9-42C0-A6A1-E90F34C159EC@bdboyle.com> amazing what you can find in the docs....;) -- Bryan Sent from my iPhone please forgive misspellings... On Jun 9, 2012, at 13:06, "Ken" wrote: > If you look at the bottom of this page > > http://ohnosec.org/drupal/node/3 > > you will see where you can sign up to report bugs ? it?s called mantis > > 73 > > ken > > > > From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Alan Adamson > Sent: Saturday, June 09, 2012 12:27 PM > To: 'app_rpt mailing list' > Subject: [App_rpt-users] Features/bugs > > Just curious, is there a bug tracking db to enter either bugs or feature requests? > > Some like Mantis, bugzilla, etc? > > On the feature request front. I've got a small one. > > A) it might be nice to have the ability enable or disable the RTCM either from a hardware pin (letting the controller in a repeater do it), or by some DTMF pattern - unique to the RTCM. > > I had a case where I has setup the offline mode and tested it as best as I could. It got in a mode where it was going off and back on line (not and RTCM issue, it was related to how I did my internet too it), and the way I had it configured, it was IDing, every time the connection failed for restored? (on about 5 second intervals)? This happened once I was *away* from the site? I'd have loved the ability to remotely have shut off the RTCM but couldn't figure out a way to do that? > > Luckily I had to go back to the site the next day so I fixed my issue and reconfigured the offline mode slightly? > > I've kinda acid tested one of these from the connection resilience standpoint. Been running it on a somewhat flakey 4G connection that cycles connectivity quite frequently. Needless to say, the RTCM has been a rock and it's been through some very strange states :)? The most strange is one where the connectivity back to it is still partially there, but as a result, it cycles the PTT on the repeater at about every syllable?. very interesting behavior, but not a bug, it's doing exactly what it should be? and as soon as connectivity comes back fully, it's just keeps on keeping on. > > All of this will go away as I'm about 24 hours away from having real hardwired inet at the sight, but it has proved to me that this is gonna work just great in a mobile install as another node that I'll host on my allstar server. > > Alan > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From randy at neals.ca Sat Jun 9 21:47:52 2012 From: randy at neals.ca (Randy Neals) Date: Sat, 9 Jun 2012 14:47:52 -0700 Subject: [App_rpt-users] Anyone running on Amazon EC2 Virtual Server? Message-ID: Hi, Planning on using a few RTCMs to link several repeaters at different sites. I am thinking through my server options, and wondering if anyone has tried the ACID package/AllStar running on an Amazon AWS Virtual Server? Looks like I need to do an install, then make a machine image suitable for AWS. Thanks, Randy KI6TWT / VE3RWN -------------- next part -------------- An HTML attachment was scrubbed... URL: From dave_k_420 at yahoo.com Sun Jun 10 01:33:31 2012 From: dave_k_420 at yahoo.com (dave k) Date: Sat, 9 Jun 2012 18:33:31 -0700 (PDT) Subject: [App_rpt-users] zaptel neccessary modules Message-ID: <1339292011.22391.YahooMailClassic@web114016.mail.gq1.yahoo.com> can someone tell me the bare minimum modules needed from zaptel? radio interafces as USB, UriX, and the 4port pci radio card. I assume ztdummy wcusb.. ?? From telesistant at hotmail.com Sun Jun 10 02:00:34 2012 From: telesistant at hotmail.com (Jim Duuuude) Date: Sat, 9 Jun 2012 19:00:34 -0700 Subject: [App_rpt-users] zaptel neccessary modules In-Reply-To: <1339292011.22391.YahooMailClassic@web114016.mail.gq1.yahoo.com> References: <1339292011.22391.YahooMailClassic@web114016.mail.gq1.yahoo.com> Message-ID: probably just ztdummy would do it, unless you are using a pciradio card. Jim WB6NIL > Date: Sat, 9 Jun 2012 18:33:31 -0700 > From: dave_k_420 at yahoo.com > To: App_rpt-users at ohnosec.org > Subject: [App_rpt-users] zaptel neccessary modules > > can someone tell me the bare minimum modules needed from zaptel? radio interafces as USB, UriX, and the 4port pci radio card. > I assume ztdummy wcusb.. ?? > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From kc9gqr at gmail.com Sun Jun 10 04:11:43 2012 From: kc9gqr at gmail.com (Bradley Haney) Date: Sat, 9 Jun 2012 23:11:43 -0500 Subject: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. Message-ID: Hello all.. looked up the great info on getting a iax client working on our repeater.. I can dial our node number now from a IAX client on my phone and use *99 to tx and # to stop Tx and listen.. Now I would like to be able to "Call" my phone from the repeater. We are currently using allstarlink's Autopatch also.. so would i just dial *6 and then the extension number i created? or would i have to do more work in the extensions.conf dept. Thanks for all the help in advance.. Bradley From ken-robinson at o2.co.uk Sun Jun 10 08:46:23 2012 From: ken-robinson at o2.co.uk (Ken Robinson) Date: Sun, 10 Jun 2012 09:46:23 +0100 Subject: [App_rpt-users] Allstar hub and Echolink Message-ID: <000001cd46e5$842b7cb0$8c827610$@o2.co.uk> Hi All, A friend has asked me to help him set up an Allstar hub, I'm having difficulty find documentation so set up a hub, but I'm not sure that what he wants to do will work. At the moment he runs an Echolink node and would like to upgrade to Allstar but using Allstar as a hub (no radio interface) is it possible to run the hub on a different pc to the Echolink pc and if so how would the two pc's talk to each other Thanks Ken G0lce Node 28468 From ke2n at cs.com Sun Jun 10 11:57:26 2012 From: ke2n at cs.com (Ken) Date: Sun, 10 Jun 2012 07:57:26 -0400 Subject: [App_rpt-users] Allstar hub and Echolink In-Reply-To: <000001cd46e5$842b7cb0$8c827610$@o2.co.uk> References: <000001cd46e5$842b7cb0$8c827610$@o2.co.uk> Message-ID: <000801cd4700$347fdf60$9d7f9e20$@cs.com> Setting up a hub is easy - you just configure a standard install to use rxchannel = Zap/pseudo instead of USB. You don't need any USB config files. The problem is on the Echolink side. Because of limitations inherent in E/L, you cannot run two E/L nodes behind the same router. If your friend has two IP addresses, it would work; but not with a single IP. With two IP's you would conference the two systems together on the E/L side. For a single IP, what you need to do is move the radios to the asterisk system and run the E/L node from there (i.e., all on one PC). Then it will work seamlessly. Of course, that means you need a radio interface that works with Asterisk.... 73/GL Ken 27021/27061/28204 522456 Echolink W4BRM-B DSTAR > -----Original Message----- > From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users- > bounces at ohnosec.org] On Behalf Of Ken Robinson > Sent: Sunday, June 10, 2012 4:46 AM > To: app_rpt-users at ohnosec.org > Subject: [App_rpt-users] Allstar hub and Echolink > > > Hi All, > A friend has asked me to help him set up an Allstar hub, I'm having difficulty > find documentation so set up a hub, but I'm not sure that what he wants to > do will work. > > At the moment he runs an Echolink node and would like to upgrade to Allstar > but using Allstar as a hub (no radio interface) is it possible to run the hub on a > different pc to the Echolink pc and if so how would the two pc's talk to each > other > > Thanks > > Ken G0lce Node 28468 > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users From tim.sawyer at me.com Sun Jun 10 15:31:01 2012 From: tim.sawyer at me.com (Tim Sawyer) Date: Sun, 10 Jun 2012 08:31:01 -0700 Subject: [App_rpt-users] Allstar hub and Echolink In-Reply-To: <000001cd46e5$842b7cb0$8c827610$@o2.co.uk> References: <000001cd46e5$842b7cb0$8c827610$@o2.co.uk> Message-ID: <2CA4CF2E-D0D5-451F-B6EF-10AB8169FA1F@me.com> Every Allstar node can accept multiple connections. A hub in the Allstar world is just node with no radios attached. When Echolink is installed on Allstar it is attached to an Allstar node. In other words, Echolink connections terminate and originate with the Allstar node. For example, your Allstar node is 28468 and your Echolink 123456. If an Echolink user connects to your Echolink node 123456, the connection will be heard on Allstar node 28468 and any other Allstar or Echolink nodes connected to node 28468. Echolink is super easy to install on Allstar. It's just one config file with your Echolink user ID and password and a few other details. As the other poster said, you will have to move Echolink off it's current server and on to Allstar as you can only have one Echolink station behind a single IP address. However you CAN still use a Windows, iPhone or Android Echolink client behind that same IP address when using a Echolink proxy. iPhone and (I believe) Android use a proxy automatically. With Windows you have to select a proxy every time you start the client. -- Tim :wq On Jun 10, 2012, at 1:46 AM, Ken Robinson wrote: > > Hi All, > A friend has asked me to help him set up an Allstar hub, I'm having > difficulty find documentation so set up a hub, but I'm not sure that what he > wants to do will work. > > At the moment he runs an Echolink node and would like to upgrade to Allstar > but using Allstar as a hub (no radio interface) is it possible to run the > hub on a different pc to the Echolink > pc and if so how would the two pc's talk to each other > > Thanks > > Ken G0lce Node 28468 > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users From pete.elke at esquared.com Sun Jun 10 18:43:12 2012 From: pete.elke at esquared.com (Peter Elke) Date: Sun, 10 Jun 2012 18:43:12 -0000 Subject: [App_rpt-users] Thinking out loud In-Reply-To: <4FD2B72F.8030209@bdboyle.com> References: <7EA10F25-C684-4F0C-8A63-4E4B2513648F@me.com> <4FD2B72F.8030209@bdboyle.com> Message-ID: <8035B62A7B044D4B81015D5C49D1627D7EDEB4@webmail.esquared.net> Hi Matt, I use a Verizon MiFi 4510L with the RTCM plugged into a Ubiquiti PicoNode-2 bridge (with a dummy-load antenna). I have taken it all over the US and to Europe. Works great! I travel 30-40 weeks a year and I always have my RTCM and PicoNode-2 (all in a small pelican box). 4G LTE coverage helps a lot and the low bandwidth has not overrun my 5Gig/month 4G allotment. If you want to see how it sounds try dialing 27433 (outside of business hours) and we can have an audio-test QSO. Pete/WI6H -----Original Message----- From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Bryan D. Boyle Sent: Friday, June 08, 2012 7:39 PM To: Matt Roberts; app_rpt mailing list Subject: Re: [App_rpt-users] Thinking out loud On 6/8/2012 10:25 PM, Matt Roberts wrote: > Will the RTCM work with a mobile WIFI hotspot? > If the hotspot doesn't have an ethernet port, you'll need something like the Netgear WNCE2001 wireless bridge to get the RTCM to make the hop. And if your hotspot is not on an unlimited dataplan (as well as being at least capable of high 3G or pseudo-4G speeds), you will rapidly eat through your monthly allotment as well as not being entirely pleased with the audio quality. I have the above netgear unit on my remoterig for my TS480 setup, and while it is useable...it's not 100% reliable, certainly not at the same level you've come to expect (or not, depending on where and what your current wired service give you) from a hard link. BB WB0YLE _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users From g4rky at yahoo.co.uk Sun Jun 10 20:59:48 2012 From: g4rky at yahoo.co.uk (Matt Beasant) Date: Sun, 10 Jun 2012 21:59:48 +0100 Subject: [App_rpt-users] Node lat and long Message-ID: I just received the excellent news about the RF Finder world wide repeater directory, congrats to Jim for sorting this out! Nice one! I'm logged in trying to check the lat / long info for my nodes and I cannot find out where they are set? Could someone please point me in the right direction so I can make sure this is correct before the data gets extracted to the directory? Many thanks, Matt G4RKY -------------- next part -------------- An HTML attachment was scrubbed... URL: From telesistant at hotmail.com Sun Jun 10 21:01:44 2012 From: telesistant at hotmail.com (Jim Duuuude) Date: Sun, 10 Jun 2012 14:01:44 -0700 Subject: [App_rpt-users] Node lat and long In-Reply-To: References: Message-ID: The lat/lon is set in the server entry for the server associated with the node. Jim Date: Sun, 10 Jun 2012 21:59:48 +0100 From: g4rky at yahoo.co.uk To: app_rpt-users at ohnosec.org Subject: [App_rpt-users] Node lat and long I just received the excellent news about the RF Finder world wide repeater directory, congrats to Jim for sorting this out! Nice one! I'm logged in trying to check the lat / long info for my nodes and I cannot find out where they are set? Could someone please point me in the right direction so I can make sure this is correct before the data gets extracted to the directory? Many thanks, Matt G4RKY _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From monty at ke7jvx.com Sun Jun 10 21:07:28 2012 From: monty at ke7jvx.com (Monty) Date: Sun, 10 Jun 2012 14:07:28 -0700 Subject: [App_rpt-users] Quad PCI Radio Card Message-ID: Hello Everyone, I just installed a Quad PCI Radio Card into my test box and am trying to configure it without any success. I get the following message from the CLI, * "no channel type registered for 'zap'"*. I just installed from a new ISO and upgraded to the newest svn. Here is what I added to my config files: rpt.conf: rxchannel=zap/1 I used the example configs for modules.conf, zaptel.conf, and zapata.conf. Any ideas? Monty -------------- next part -------------- An HTML attachment was scrubbed... URL: From g4rky at yahoo.co.uk Sun Jun 10 21:07:57 2012 From: g4rky at yahoo.co.uk (Matt Beasant) Date: Sun, 10 Jun 2012 22:07:57 +0100 Subject: [App_rpt-users] Node lat and long In-Reply-To: References: Message-ID: Got it! Thanks Jim, Matt On 10 June 2012 22:01, Jim Duuuude wrote: > The lat/lon is set in the server entry for the server associated with the > node. > > Jim > > ------------------------------ > Date: Sun, 10 Jun 2012 21:59:48 +0100 > From: g4rky at yahoo.co.uk > To: app_rpt-users at ohnosec.org > Subject: [App_rpt-users] Node lat and long > > > I just received the excellent news about the RF Finder world wide repeater > directory, congrats to Jim for sorting this out! Nice one! > > I'm logged in trying to check the lat / long info for my nodes and I > cannot find out where they are set? > > Could someone please point me in the right direction so I can make sure > this is correct before the data gets extracted to the directory? > > Many thanks, > > Matt > G4RKY > > > _______________________________________________ App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From telesistant at hotmail.com Sun Jun 10 21:09:14 2012 From: telesistant at hotmail.com (Jim Duuuude) Date: Sun, 10 Jun 2012 14:09:14 -0700 Subject: [App_rpt-users] Quad PCI Radio Card In-Reply-To: References: Message-ID: and you *did* run ztcfg after changing the /etc/zaptel.conf file, ... right?? Jim From: monty at ke7jvx.com Date: Sun, 10 Jun 2012 14:07:28 -0700 To: app_rpt-users at ohnosec.org Subject: [App_rpt-users] Quad PCI Radio Card Hello Everyone, I just installed a Quad PCI Radio Card into my test box and am trying to configure it without any success. I get the following message from the CLI, "no channel type registered for 'zap'". I just installed from a new ISO and upgraded to the newest svn. Here is what I added to my config files: rpt.conf:rxchannel=zap/1 I used the example configs for modules.conf, zaptel.conf, and zapata.conf. Any ideas? Monty _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From bdboyle at bdboyle.com Mon Jun 11 00:05:08 2012 From: bdboyle at bdboyle.com (Bryan D. Boyle) Date: Sun, 10 Jun 2012 20:05:08 -0400 Subject: [App_rpt-users] Fwd: Suffolk Computer Systems, Inc. Event In-Reply-To: <1110202826804.1101706674612.5724.6.12163005@scheduler.constantcontact.com> References: <1110202826804.1101706674612.5724.6.12163005@scheduler.constantcontact.com> Message-ID: <4FD53634.9060305@bdboyle.com> Here's the official announcement; FWIW, I have the app on my iPhone, iPad, and as a bookmark in my browser(s), and it supports downloading the list to a number of different file formats, which makes it easy to upload into your favorite radio programming software (I'm using CHIRP). No financial interest, etc. But, it's a hell of a lot more useful than the bloatware from the League (that goes for a lot of things, come to think of it...), with the added feature that it uses (at least on the smartphone platform) the on-board GPS, so you can search a specific radius around your location, and find the nearest x repeaters that are listed in the directory. Again, no financial interest, etc. But, for 10 bucks sub a year...real-time searching, etc...worth more than the 30 you spend every year for the league directory... --- The Worldwide Repeater Directory now supports AllStar!!! + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Greetings all Allstar node owners. Very exciting news. We will in very short order be listed in RFinder - The World Wide Repeater Directory. The folks at RFinder found a lot of inconsistencies in our data. In order to list our nodes accurately, please take a moment and update your info. They will be updating the node list once a week Mondays at 0100Z. Their apps will be enhanced in the coming weeks and months to include current node status! To update your info, please log into the Allstar Link Portal at https://allstarlink.org. In particular, please ensure that your nodes's callsign, frequency, tone, location, and particularly the LAT/LON information is accurate. If you have security concerns about giving exact LAT/LON location, just give a close Lat/Lon within a mile or two. For tone information, if you are using Digital Coded Squelch, please precede the number with a D, such as D023. The WWRD Supporting AllStar is just another step of making The World Wide Repeater Directory, it's third party applications such as RT Systems on Microsoft Windows, CHIRP and of course the RFinder family of programs on iPhone, Android and www Ham Radio's one-stop-shop for repeater data, no matter what the technology used for repeating radio signals. RFinder is available for iPhone and Android, as well as standard web-based (PC). Subscribers to RFinder have full access to the Directory on Android, iPhone, iPad, iPod, web, RT Systems Inc radio programming software and CHIRP open source radio programming software. If you are interested in finding out more about RFinder, please visit their website at http://www.rfinder.net. This email message has been sent to all Allstar Link node owners as a collaborative effort between Allstar Link and RFinder. All Allstar node owners get 2 addtional years free when purchasing a subscription to RFinder. Just go to http://coupon.rfinder.net [http://r20.rs6.net/tn.jsp?e=001ufJjJzgMHoZ-7jMOF3K2EWia9mDva6Ty7Rco0_XhnNn19kkgi8sM6rq_fE-Nk63x5SnFxk_H7WnoiMgHyxXqHGCPLsF-nNaDSsxBwSSqZ-P4QpdCbdCq_A==] and use ALLSTAR as the coupon code after purchasing RFinder or a subscription on the web http://www.rfinder.net. Jim, WB6NIL, Allstar Link / Bob, W2CYK, RFinder ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Bob Greenberg RFinder - The World Wide Repeater Directory ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Forward this email http://ui.constantcontact.com/sa/fwtf.jsp?llr=unqlnbcab&m=1101706674612&ea=wb0yle at arrl.net&a=1110202826804 This email was sent to wb0yle at arrl.net by w2cyk at rfinder.net. Update Profile/Email Address http://visitor.constantcontact.com/do?p=oo&mse=0010Oqxbncv4WpoC0ybRlgYajTcJDGeNZLP&t=001Ft9KPytfhM2i5rjZW7pRlQ%3D%3D&llr=unqlnbcab Instant removal with SafeUnsubscribe(TM) http://visitor.constantcontact.com/do?p=un&mse=0010Oqxbncv4WpoC0ybRlgYajTcJDGeNZLP&t=001Ft9KPytfhM2i5rjZW7pRlQ%3D%3D&llr=unqlnbcab Privacy Policy: http://ui.constantcontact.com/roving/CCPrivacyPolicy.jsp Online Marketing by Constant Contact(R) www.constantcontact.com RFinder - The Worldwide Repeater Directory | 6 Park St | Wading River | Wading River | NY | 11792 From telesistant at hotmail.com Mon Jun 11 00:14:11 2012 From: telesistant at hotmail.com (Jim Duuuude) Date: Sun, 10 Jun 2012 17:14:11 -0700 Subject: [App_rpt-users] good news (maybe) Message-ID: I believe (with the help of Carlos KB2CSN) that I found the age-old (over 10 years) bug where once in a while after disconnecting a link, there would be no announcement. The new version of app_rpt.c that addresses (or attempts to) this problem is available from SVN. If you're tired of your node doing this occasionally, please update from SVN per these instructions: https://allstarlink.org/support.html#astupgrade Thanks Jim WB6NIL -------------- next part -------------- An HTML attachment was scrubbed... URL: From baldwin88 at yahoo.com Mon Jun 11 00:30:34 2012 From: baldwin88 at yahoo.com (Fran) Date: Sun, 10 Jun 2012 17:30:34 -0700 (PDT) Subject: [App_rpt-users] RTCM and Repeater Message-ID: <1339374634.26518.YahooMailClassic@web160304.mail.bf1.yahoo.com> I would like to know if I can use the RTCM box and connect it to a repeater via a repeater controller port.?? The RTCM would be linked to a remote server with the ALLSTAR software. -------------- next part -------------- An HTML attachment was scrubbed... URL: From telesistant at hotmail.com Mon Jun 11 00:37:14 2012 From: telesistant at hotmail.com (Jim Duuuude) Date: Sun, 10 Jun 2012 17:37:14 -0700 Subject: [App_rpt-users] RTCM and Repeater In-Reply-To: <1339374634.26518.YahooMailClassic@web160304.mail.bf1.yahoo.com> References: <1339374634.26518.YahooMailClassic@web160304.mail.bf1.yahoo.com> Message-ID: Sure, it would be configured in the rpt.conf the same way you would do this with a URI. Jim Date: Sun, 10 Jun 2012 17:30:34 -0700 From: baldwin88 at yahoo.com To: app_rpt-users at ohnosec.org Subject: [App_rpt-users] RTCM and Repeater I would like to know if I can use the RTCM box and connect it to a repeater via a repeater controller port. The RTCM would be linked to a remote server with the ALLSTAR software. _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From w3tmb1 at gmail.com Mon Jun 11 03:30:52 2012 From: w3tmb1 at gmail.com (Travis Best) Date: Sun, 10 Jun 2012 23:30:52 -0400 Subject: [App_rpt-users] Zaptel Issue Message-ID: <4FD5666C.60909@gmail.com> 1. You only have to compile Zaptel support into Asterisk if you need it. One option is to recompile without Zaptel support. 2. You only have to load Zaptel drivers if you want to take advantage of Zaptel services. One option is to unload zaptel modules if you don't need them . 3. If you need Zaptel services, you must correctly configure Zaptel. [Jun 10 23:29:52] ERROR[6124] asterisk.c: Asterisk has detected a problem with y our Zaptel configuration and will shutdown for your protection. You have option s: 1. You only have to compile Zaptel support into Asterisk if you need it. One option is to recompile without Zaptel support. 2. You only have to load Zaptel drivers if you want to take advantage of Zaptel services. One option is to unload zaptel modules if you don't need them . 3. If you need Zaptel services, you must correctly configure Zaptel. [Jun 10 23:29:53] ERROR[6131] asterisk.c: Asterisk has detected a problem with y our Zaptel configuration and will shutdown for your protection. You have option s: Anyone have any ideas???? Just started out of the blue -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/pkcs7-signature Size: 3729 bytes Desc: S/MIME Cryptographic Signature URL: From donh at sigma.net Mon Jun 11 05:19:55 2012 From: donh at sigma.net (Don Hackler) Date: Sun, 10 Jun 2012 22:19:55 -0700 Subject: [App_rpt-users] Zaptel Issue In-Reply-To: <4FD5666C.60909@gmail.com> References: <4FD5666C.60909@gmail.com> Message-ID: I fought this problem for days on a new install?. I installed several times, same problem. It turned out my Acid download and/or CD burn was corrupt. When I did a fresh download, burned a new CD, and installed from scratch, it finally started working. On Jun 10, 2012, at 8:30 PM, Travis Best wrote: > 1. You only have to compile Zaptel support into Asterisk if you need it. One option is to recompile without Zaptel support. > 2. You only have to load Zaptel drivers if you want to take advantage of Zaptel services. One option is to unload zaptel modules if you don't need them . > 3. If you need Zaptel services, you must correctly configure Zaptel. > [Jun 10 23:29:52] ERROR[6124] asterisk.c: Asterisk has detected a problem with y our Zaptel configuration and will shutdown for your protection. You have option s: > 1. You only have to compile Zaptel support into Asterisk if you need it. One option is to recompile without Zaptel support. > 2. You only have to load Zaptel drivers if you want to take advantage of Zaptel services. One option is to unload zaptel modules if you don't need them . > 3. If you need Zaptel services, you must correctly configure Zaptel. > [Jun 10 23:29:53] ERROR[6131] asterisk.c: Asterisk has detected a problem with y our Zaptel configuration and will shutdown for your protection. You have option s: > > > Anyone have any ideas???? Just started out of the blue > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users From n9gmr at me.com Mon Jun 11 10:09:11 2012 From: n9gmr at me.com (Matt Roberts) Date: Mon, 11 Jun 2012 06:09:11 -0400 Subject: [App_rpt-users] good news (maybe) In-Reply-To: References: Message-ID: I'm going to attempt to automate this process. If I get it working, how can I make the script available for other node owners? Matt Roberts n9gmr at me.com Sent from my iPhone On Jun 10, 2012, at 8:14 PM, Jim Duuuude wrote: > I believe (with the help of Carlos KB2CSN) that I found the age-old (over 10 years) > bug where once in a while after disconnecting a link, there would be no announcement. > > The new version of app_rpt.c that addresses (or attempts to) this problem is available > from SVN. > > If you're tired of your node doing this occasionally, please update from SVN per these > instructions: > > https://allstarlink.org/support.html#astupgrade > > Thanks > > Jim WB6NIL > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From w3tmb1 at gmail.com Mon Jun 11 11:45:30 2012 From: w3tmb1 at gmail.com (Travis Best) Date: Mon, 11 Jun 2012 07:45:30 -0400 Subject: [App_rpt-users] Zaptel Issue In-Reply-To: References: <4FD5666C.60909@gmail.com> Message-ID: <4FD5DA5A.7040406@gmail.com> Issue resolved edited the /etc/sysconfig/zaptel so that only the ztdummy was the only driver loading now it works fine On 6/11/2012 1:19 AM, Don Hackler wrote: > I fought this problem for days on a new install?. > I installed several times, same problem. > It turned out my Acid download and/or CD burn was corrupt. > When I did a fresh download, burned a new CD, and installed from scratch, it finally started working. > > > On Jun 10, 2012, at 8:30 PM, Travis Best wrote: > >> 1. You only have to compile Zaptel support into Asterisk if you need it. One option is to recompile without Zaptel support. >> 2. You only have to load Zaptel drivers if you want to take advantage of Zaptel services. One option is to unload zaptel modules if you don't need them . >> 3. If you need Zaptel services, you must correctly configure Zaptel. >> [Jun 10 23:29:52] ERROR[6124] asterisk.c: Asterisk has detected a problem with y our Zaptel configuration and will shutdown for your protection. You have option s: >> 1. You only have to compile Zaptel support into Asterisk if you need it. One option is to recompile without Zaptel support. >> 2. You only have to load Zaptel drivers if you want to take advantage of Zaptel services. One option is to unload zaptel modules if you don't need them . >> 3. If you need Zaptel services, you must correctly configure Zaptel. >> [Jun 10 23:29:53] ERROR[6131] asterisk.c: Asterisk has detected a problem with y our Zaptel configuration and will shutdown for your protection. You have option s: >> >> >> Anyone have any ideas???? Just started out of the blue >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -- Travis M. Best| Central Area ACS Officer | W3TMB Pennsylvania Emergency Management Agency 2605 Interstate Drive | Harrisburg | PA 17110 Phone: 570-279-1746 Email: ca-acso at pa.gov www.PEMA.state.pa.us "This e-mail message, including any attachments, is intended for the sole use of the individual(s) and entity(ies) to who it is addressed and may contain information that is privileged, confidential and exempt from disclosure under the applicable law. If you are not the intended addressee, nor authorized to receive for the intended addressee, you are notified that you may not use, copy, disclose or distribute any information contained in this e-mail message. If you have received this message in error, immediately notify the sender and delete the message." -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/pkcs7-signature Size: 3729 bytes Desc: S/MIME Cryptographic Signature URL: From telesistant at hotmail.com Mon Jun 11 17:22:07 2012 From: telesistant at hotmail.com (Jim Duuuude) Date: Mon, 11 Jun 2012 10:22:07 -0700 Subject: [App_rpt-users] good news (maybe) In-Reply-To: References: , Message-ID: The script is already on the website... I suppose you could put it into a file or something :-) Jim CC: app_rpt-users at ohnosec.org From: n9gmr at me.com Subject: Re: [App_rpt-users] good news (maybe) Date: Mon, 11 Jun 2012 06:09:11 -0400 To: telesistant at hotmail.com I'm going to attempt to automate this process. If I get it working, how can I make the script available for other node owners? Matt Robertsn9gmr at me.com Sent from my iPhone On Jun 10, 2012, at 8:14 PM, Jim Duuuude wrote: I believe (with the help of Carlos KB2CSN) that I found the age-old (over 10 years) bug where once in a while after disconnecting a link, there would be no announcement. The new version of app_rpt.c that addresses (or attempts to) this problem is available from SVN. If you're tired of your node doing this occasionally, please update from SVN per these instructions: https://allstarlink.org/support.html#astupgrade Thanks Jim WB6NIL _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From kd8b at thebades.net Mon Jun 11 18:07:48 2012 From: kd8b at thebades.net (Doug Bade) Date: Mon, 11 Jun 2012 14:07:48 -0400 Subject: [App_rpt-users] MDC 1200 over RTCM Voter Possible?? Message-ID: <000601cd47fd$1c3b51c0$54b1f540$@thebades.net> I am curious if anyone has set up rtcm's and used mdc1200 over them especially during a vote??? And I am pretty sure the answer is no, but can 2 RTCM ( non voted direct link) units talk to each other directly without a Host ALLStar Link system. -------------- next part -------------- An HTML attachment was scrubbed... URL: From jeff.carrier at rmsmsecurity.com Mon Jun 11 18:54:39 2012 From: jeff.carrier at rmsmsecurity.com (Jeffrey S. Carrier) Date: Mon, 11 Jun 2012 12:54:39 -0600 Subject: [App_rpt-users] Echollink.conf In-Reply-To: References: Message-ID: <9E97761DFD3ED7488C4F6D0C2BC286C616C8B2@Security-5.plantprotection.ad> Ok, here's a stoopid question. I moved 28289 and am attempting to change the coordinates in echolink.conf. I've changed and restarted about 100 times and echolink.conf has the correct "new" coordinates but the APRS-IS server is still receiving the "old" coordinates. Are there coordinates somewhere else in some other conf file that I'm missing? Also, while on the subject...what is the "recfile" line for? Je73 de K0JSC ________________________________ From: Matt Roberts [mailto:n9gmr at me.com] Sent: Monday, June 11, 2012 4:09 AM To: Jim Duuuude Cc: app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] good news (maybe) I'm going to attempt to automate this process. If I get it working, how can I make the script available for other node owners? Matt Roberts n9gmr at me.com Sent from my iPhone On Jun 10, 2012, at 8:14 PM, Jim Duuuude wrote: I believe (with the help of Carlos KB2CSN) that I found the age-old (over 10 years) bug where once in a while after disconnecting a link, there would be no announcement. The new version of app_rpt.c that addresses (or attempts to) this problem is available from SVN. If you're tired of your node doing this occasionally, please update from SVN per these instructions: https://allstarlink.org/support.html#astupgrade Thanks Jim WB6NIL _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From kc9gqr at gmail.com Mon Jun 11 18:54:43 2012 From: kc9gqr at gmail.com (Bradley Haney) Date: Mon, 11 Jun 2012 13:54:43 -0500 Subject: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. In-Reply-To: References: Message-ID: Would anyone know how to intergate this if you already use the allstarlink autopatch? OUr club is using the alltarlink autopatch for 5.00 a month and we would like to add a few SIP/IAX extensions so the Rf users coudl dial out on autopatch and then also dial the extension numbers. Is it possible to have both or would i have to get rid of the allstarlink autopatch? Or is there an easy way to configure it so if you wanted to dial out on the autopatch you have to do a *6 for autopatch and then lets say 9 for an outside line? Bradley On Mon, Jun 11, 2012 at 1:41 PM, Monty Dana wrote: > This is what I used from Keith KF7DRV: > > http://ohnosec.org/pipermail/app_rpt-users/2010-February/000787.html > > Monty > > > On Sat, Jun 9, 2012 at 9:11 PM, Bradley Haney wrote: >> >> Hello all.. ?looked up the great info on getting a ?iax client working >> ?on our repeater.. I can dial our node number now from a IAX client on >> my phone and ? use *99 to tx and # to ?stop ?Tx and listen.. ? ?Now I >> would like to be able to ?"Call" my phone from the repeater. ? We are >> currently using allstarlink's ?Autopatch also.. ?so would i just dial >> *6 and then the extension number i created? >> ?or would i have to do more work ?in the extensions.conf dept. >> >> Thanks for all the help in advance.. >> >> Bradley >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > From telesistant at hotmail.com Mon Jun 11 18:54:53 2012 From: telesistant at hotmail.com (Jim Duuuude) Date: Mon, 11 Jun 2012 11:54:53 -0700 Subject: [App_rpt-users] MDC 1200 over RTCM Voter Possible?? In-Reply-To: <000601cd47fd$1c3b51c0$54b1f540$@thebades.net> References: <000601cd47fd$1c3b51c0$54b1f540$@thebades.net> Message-ID: No fair.. thats 2 separate questions :-) :-). 1) I can pretty much assure you that no one has ever tried the MDC1200 thing. I would be interested in seeing the results. I think the "voter test" CLI command would probably an easy way to test this. 2) 2 (or more) RTCM's can not talk to each other directly. However, the channel driver and/or app_radbridge is capable of providing "transparent" bridging between RTCM's (and non-RTCM radio devices too). So, there has to be a host somewhere, however, it does not have to be in an "app_rpt" configuration. Jim From: kd8b at thebades.net To: app_rpt-users at ohnosec.org Date: Mon, 11 Jun 2012 14:07:48 -0400 Subject: [App_rpt-users] MDC 1200 over RTCM Voter Possible?? I am curious if anyone has set up rtcm?s and used mdc1200 over them especially during a vote??? And I am pretty sure the answer is no, but can 2 RTCM ( non voted direct link) units talk to each other directly without a Host ALLStar Link system. _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From telesistant at hotmail.com Mon Jun 11 18:56:53 2012 From: telesistant at hotmail.com (Jim Duuuude) Date: Mon, 11 Jun 2012 11:56:53 -0700 Subject: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. In-Reply-To: References: , , Message-ID: you can just agument the [radio] stanza in the extensions.conf to add dialplan entries for whatever you want. Jim > Date: Mon, 11 Jun 2012 13:54:43 -0500 > From: kc9gqr at gmail.com > To: ke7jvx at gmail.com > CC: app_rpt-users at ohnosec.org > Subject: Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. > > Would anyone know how to intergate this if you already use the > allstarlink autopatch? OUr club is using the alltarlink autopatch > for 5.00 a month and we would like to add a few SIP/IAX extensions > so the Rf users coudl dial out on autopatch and then also dial the > extension numbers. Is it possible to have both or would i have to get > rid of the allstarlink autopatch? > > Or is there an easy way to configure it so if you wanted to dial > out on the autopatch you have to do a *6 for autopatch and then lets > say 9 for an outside line? > > > Bradley > > On Mon, Jun 11, 2012 at 1:41 PM, Monty Dana wrote: > > This is what I used from Keith KF7DRV: > > > > http://ohnosec.org/pipermail/app_rpt-users/2010-February/000787.html > > > > Monty > > > > > > On Sat, Jun 9, 2012 at 9:11 PM, Bradley Haney wrote: > >> > >> Hello all.. looked up the great info on getting a iax client working > >> on our repeater.. I can dial our node number now from a IAX client on > >> my phone and use *99 to tx and # to stop Tx and listen.. Now I > >> would like to be able to "Call" my phone from the repeater. We are > >> currently using allstarlink's Autopatch also.. so would i just dial > >> *6 and then the extension number i created? > >> or would i have to do more work in the extensions.conf dept. > >> > >> Thanks for all the help in advance.. > >> > >> Bradley > >> _______________________________________________ > >> App_rpt-users mailing list > >> App_rpt-users at ohnosec.org > >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From jeff.carrier at rmsmsecurity.com Mon Jun 11 19:02:18 2012 From: jeff.carrier at rmsmsecurity.com (Jeffrey S. Carrier) Date: Mon, 11 Jun 2012 13:02:18 -0600 Subject: [App_rpt-users] Echollink.conf In-Reply-To: <9E97761DFD3ED7488C4F6D0C2BC286C616C8B2@Security-5.plantprotection.ad> References: <9E97761DFD3ED7488C4F6D0C2BC286C616C8B2@Security-5.plantprotection.ad> Message-ID: <9E97761DFD3ED7488C4F6D0C2BC286C616C8B3@Security-5.plantprotection.ad> Ok, I'm an idiot...just answered my own question (gps.conf) still not sure about the (recfile) though. K0JSC jeff ________________________________ From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Jeffrey S. Carrier Sent: Monday, June 11, 2012 12:55 PM To: app_rpt-users at ohnosec.org Subject: [App_rpt-users] Echollink.conf Ok, here's a stoopid question. I moved 28289 and am attempting to change the coordinates in echolink.conf. I've changed and restarted about 100 times and echolink.conf has the correct "new" coordinates but the APRS-IS server is still receiving the "old" coordinates. Are there coordinates somewhere else in some other conf file that I'm missing? Also, while on the subject...what is the "recfile" line for? Je73 de K0JSC ________________________________ From: Matt Roberts [mailto:n9gmr at me.com] Sent: Monday, June 11, 2012 4:09 AM To: Jim Duuuude Cc: app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] good news (maybe) I'm going to attempt to automate this process. If I get it working, how can I make the script available for other node owners? Matt Roberts n9gmr at me.com Sent from my iPhone On Jun 10, 2012, at 8:14 PM, Jim Duuuude wrote: I believe (with the help of Carlos KB2CSN) that I found the age-old (over 10 years) bug where once in a while after disconnecting a link, there would be no announcement. The new version of app_rpt.c that addresses (or attempts to) this problem is available from SVN. If you're tired of your node doing this occasionally, please update from SVN per these instructions: https://allstarlink.org/support.html#astupgrade Thanks Jim WB6NIL _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From kd8b at thebades.net Mon Jun 11 19:05:07 2012 From: kd8b at thebades.net (Doug Bade) Date: Mon, 11 Jun 2012 15:05:07 -0400 Subject: [App_rpt-users] MDC 1200 over RTCM Voter Possible?? In-Reply-To: References: <000601cd47fd$1c3b51c0$54b1f540$@thebades.net> Message-ID: <003b01cd4805$1e047f60$5a0d7e20$@thebades.net> Jim; Thanks for the quick reply! I am considering these as an option on a more "mission critical" system. that uses mdc 1200 a lot.. Looks like I may need to order a pair and test.. J In this case I just need to pass MDC1200 end to end.. So do not need app_rpt to process it, just pass it.. Sorry for the 2 questions wrapped in one! Doug KD8B From: Jim Duuuude [mailto:telesistant at hotmail.com] Sent: Monday, June 11, 2012 2:55 PM To: kd8b at thebades.net; app_rpt mailing list Subject: RE: [App_rpt-users] MDC 1200 over RTCM Voter Possible?? No fair.. thats 2 separate questions :-) :-). 1) I can pretty much assure you that no one has ever tried the MDC1200 thing. I would be interested in seeing the results. I think the "voter test" CLI command would probably an easy way to test this. 2) 2 (or more) RTCM's can not talk to each other directly. However, the channel driver and/or app_radbridge is capable of providing "transparent" bridging between RTCM's (and non-RTCM radio devices too). So, there has to be a host somewhere, however, it does not have to be in an "app_rpt" configuration. Jim _____ From: kd8b at thebades.net To: app_rpt-users at ohnosec.org Date: Mon, 11 Jun 2012 14:07:48 -0400 Subject: [App_rpt-users] MDC 1200 over RTCM Voter Possible?? I am curious if anyone has set up rtcm's and used mdc1200 over them especially during a vote??? And I am pretty sure the answer is no, but can 2 RTCM ( non voted direct link) units talk to each other directly without a Host ALLStar Link system. _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From adamson_alan at hotmail.com Mon Jun 11 19:06:19 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Mon, 11 Jun 2012 15:06:19 -0400 Subject: [App_rpt-users] RTCM question(s) Message-ID: I occasionally get a connection lost/connect established almost back to back on my RTCM at a remote site. This is on a hardwired IP connection (finally) with pretty low latency and no significant packet loss in the audio on either side. e.g. here is my response rate from a remote ping to my RTCM Pinging [64.16..] with 32 bytes of data: Reply from 64.16..: bytes=32 time=60ms TTL=52 Reply from 64.16..: bytes=32 time=58ms TTL=52 Reply from 64.16..: bytes=32 time=103ms TTL=52 Reply from 64.16..: bytes=32 time=99ms TTL=52 Reply from 64.16..: bytes=32 time=81ms TTL=52 Reply from 64.16..: bytes=32 time=74ms TTL=52 Reply from 64.16..: bytes=32 time=96ms TTL=52 Reply from 64.16..: bytes=32 time=64ms TTL=52 Reply from 64.16..: bytes=32 time=57ms TTL=52 Reply from 64.16..: bytes=32 time=65ms TTL=52 Reply from 64.16..: bytes=32 time=63ms TTL=52 Reply from 64.16..: bytes=32 time=150ms TTL=52 . . . Ping statistics for 64.16..: Packets: Sent = 37, Received = 37, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 57ms, Maximum = 150ms, Average = 87ms 2 questions. Is there some way to set a time display on the messages on an RTCM when it isn't connected to a GPS, I can't tell how long the duration is between the back to back messages because all I get is as follows. ERROR! Host response timeout Host Connection Lost (Pri) (24.99.5x.xxx) Using Primary Voter Host (24.99.5x.xxx) Host Connection established (Pri) (24.99.5x.xxx) This is a single RTCM running in simple radio interface mode. Can you run an RTCM in simple mode and still connect it to a GPS? Will that set it's time locally? Is there any way to set a parameter to lengthen the timeout timer in either the voter.conf file or the RTCM configuration? I'm sure we are only talking about a few milliseconds difference is all that's needed. Thanks in advance, Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From telesistant at hotmail.com Mon Jun 11 19:29:02 2012 From: telesistant at hotmail.com (Jim Duuuude) Date: Mon, 11 Jun 2012 12:29:02 -0700 Subject: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. In-Reply-To: References: , , , , , Message-ID: Or, I suppose you could augment it, if you weren't dyslexic like me :-). Jim From: telesistant at hotmail.com To: kc9gqr at gmail.com; ke7jvx at gmail.com Date: Mon, 11 Jun 2012 11:56:53 -0700 CC: app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. you can just agument the [radio] stanza in the extensions.conf to add dialplan entries for whatever you want. Jim > Date: Mon, 11 Jun 2012 13:54:43 -0500 > From: kc9gqr at gmail.com > To: ke7jvx at gmail.com > CC: app_rpt-users at ohnosec.org > Subject: Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. > > Would anyone know how to intergate this if you already use the > allstarlink autopatch? OUr club is using the alltarlink autopatch > for 5.00 a month and we would like to add a few SIP/IAX extensions > so the Rf users coudl dial out on autopatch and then also dial the > extension numbers. Is it possible to have both or would i have to get > rid of the allstarlink autopatch? > > Or is there an easy way to configure it so if you wanted to dial > out on the autopatch you have to do a *6 for autopatch and then lets > say 9 for an outside line? > > > Bradley > > On Mon, Jun 11, 2012 at 1:41 PM, Monty Dana wrote: > > This is what I used from Keith KF7DRV: > > > > http://ohnosec.org/pipermail/app_rpt-users/2010-February/000787.html > > > > Monty > > > > > > On Sat, Jun 9, 2012 at 9:11 PM, Bradley Haney wrote: > >> > >> Hello all.. looked up the great info on getting a iax client working > >> on our repeater.. I can dial our node number now from a IAX client on > >> my phone and use *99 to tx and # to stop Tx and listen.. Now I > >> would like to be able to "Call" my phone from the repeater. We are > >> currently using allstarlink's Autopatch also.. so would i just dial > >> *6 and then the extension number i created? > >> or would i have to do more work in the extensions.conf dept. > >> > >> Thanks for all the help in advance.. > >> > >> Bradley > >> _______________________________________________ > >> App_rpt-users mailing list > >> App_rpt-users at ohnosec.org > >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From telesistant at hotmail.com Mon Jun 11 19:34:09 2012 From: telesistant at hotmail.com (Jim Duuuude) Date: Mon, 11 Jun 2012 12:34:09 -0700 Subject: [App_rpt-users] RTCM question(s) In-Reply-To: References: Message-ID: Do you have any way, on the same physical LAN as the RTCM, to put a third device to monitor packets and use tcpdump/wireshark (depending on your religion.. or ahh choice of OS's) to see if there is something weird going on? This can easily be accomplished with the use of an old-fashioned 10base-T hub (not a switch, a HUB). Jim From: adamson_alan at hotmail.com To: App_rpt-users at ohnosec.org Date: Mon, 11 Jun 2012 15:06:19 -0400 Subject: [App_rpt-users] RTCM question(s) RTCM question(s) I occasionally get a connection lost/connect established almost back to back on my RTCM at a remote site. This is on a hardwired IP connection (finally) with pretty low latency and no significant packet loss in the audio on either side. e.g. here is my response rate from a remote ping to my RTCM Pinging [64.16?.] with 32 bytes of data: Reply from 64.16?.: bytes=32 time=60ms TTL=52 Reply from 64.16?.: bytes=32 time=58ms TTL=52 Reply from 64.16?.: bytes=32 time=103ms TTL=52 Reply from 64.16?.: bytes=32 time=99ms TTL=52 Reply from 64.16?.: bytes=32 time=81ms TTL=52 Reply from 64.16?.: bytes=32 time=74ms TTL=52 Reply from 64.16?.: bytes=32 time=96ms TTL=52 Reply from 64.16?.: bytes=32 time=64ms TTL=52 Reply from 64.16?.: bytes=32 time=57ms TTL=52 Reply from 64.16?.: bytes=32 time=65ms TTL=52 Reply from 64.16?.: bytes=32 time=63ms TTL=52 Reply from 64.16?.: bytes=32 time=150ms TTL=52 . . . Ping statistics for 64.16?.: Packets: Sent = 37, Received = 37, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 57ms, Maximum = 150ms, Average = 87ms 2 questions. Is there some way to set a time display on the messages on an RTCM when it isn't connected to a GPS, I can't tell how long the duration is between the back to back messages because all I get is as follows. ERROR! Host response timeout Host Connection Lost (Pri) (24.99.5x.xxx) Using Primary Voter Host (24.99.5x.xxx) Host Connection established (Pri) (24.99.5x.xxx) This is a single RTCM running in simple radio interface mode. Can you run an RTCM in simple mode and still connect it to a GPS? Will that set it's time locally? Is there any way to set a parameter to lengthen the timeout timer in either the voter.conf file or the RTCM configuration? I'm sure we are only talking about a few milliseconds difference is all that's needed. Thanks in advance, Alan _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From telesistant at hotmail.com Mon Jun 11 19:29:48 2012 From: telesistant at hotmail.com (Jim Duuuude) Date: Mon, 11 Jun 2012 12:29:48 -0700 Subject: [App_rpt-users] Echollink.conf In-Reply-To: <9E97761DFD3ED7488C4F6D0C2BC286C616C8B3@Security-5.plantprotection.ad> References: , <9E97761DFD3ED7488C4F6D0C2BC286C616C8B2@Security-5.plantprotection.ad>, <9E97761DFD3ED7488C4F6D0C2BC286C616C8B3@Security-5.plantprotection.ad> Message-ID: Its stuff from ancient history that never happened. Jim Date: Mon, 11 Jun 2012 13:02:18 -0600 From: jeff.carrier at rmsmsecurity.com To: jeff.carrier at rmsmsecurity.com; app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] Echollink.conf Ok, I?m an idiot?just answered my own question (gps.conf) still not sure about the (recfile) though. K0JSC jeff From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Jeffrey S. Carrier Sent: Monday, June 11, 2012 12:55 PM To: app_rpt-users at ohnosec.org Subject: [App_rpt-users] Echollink.conf Ok, here?s a stoopid question. I moved 28289 and am attempting to change the coordinates in echolink.conf. I?ve changed and restarted about 100 times and echolink.conf has the correct ?new? coordinates but the APRS-IS server is still receiving the ?old? coordinates. Are there coordinates somewhere else in some other conf file that I?m missing? Also, while on the subject?what is the ?recfile? line for? Je73 de K0JSC From: Matt Roberts [mailto:n9gmr at me.com] Sent: Monday, June 11, 2012 4:09 AM To: Jim Duuuude Cc: app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] good news (maybe) I'm going to attempt to automate this process. If I get it working, how can I make the script available for other node owners? Matt Roberts n9gmr at me.com Sent from my iPhone On Jun 10, 2012, at 8:14 PM, Jim Duuuude wrote: I believe (with the help of Carlos KB2CSN) that I found the age-old (over 10 years) bug where once in a while after disconnecting a link, there would be no announcement. The new version of app_rpt.c that addresses (or attempts to) this problem is available from SVN. If you're tired of your node doing this occasionally, please update from SVN per these instructions: https://allstarlink.org/support.html#astupgrade Thanks Jim WB6NIL _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From kc9gqr at gmail.com Mon Jun 11 19:36:45 2012 From: kc9gqr at gmail.com (Bradley Haney) Date: Mon, 11 Jun 2012 14:36:45 -0500 Subject: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. In-Reply-To: References: Message-ID: Looks like i better buy an asterisk book to figure out dial plans!! On Mon, Jun 11, 2012 at 2:29 PM, Jim Duuuude wrote: > Or, I suppose you could augment it, if you weren't dyslexic like me :-). > > Jim > > ________________________________ > From: telesistant at hotmail.com > To: kc9gqr at gmail.com; ke7jvx at gmail.com > Date: Mon, 11 Jun 2012 11:56:53 -0700 > > CC: app_rpt-users at ohnosec.org > Subject: Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. > > > you can just agument the [radio] stanza in the extensions.conf > to add dialplan entries for whatever you want. > > Jim > >> Date: Mon, 11 Jun 2012 13:54:43 -0500 >> From: kc9gqr at gmail.com >> To: ke7jvx at gmail.com >> CC: app_rpt-users at ohnosec.org >> Subject: Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. >> >> Would anyone know how to intergate this if you already use the >> allstarlink autopatch? OUr club is using the alltarlink autopatch >> for 5.00 a month and we would like to add a few SIP/IAX extensions >> so the Rf users coudl dial out on autopatch and then also dial the >> extension numbers. Is it possible to have both or would i have to get >> rid of the allstarlink autopatch? >> >> Or is there an easy way to configure it so if you wanted to dial >> out on the autopatch you have to do a *6 for autopatch and then lets >> say 9 for an outside line? >> >> >> Bradley >> >> On Mon, Jun 11, 2012 at 1:41 PM, Monty Dana wrote: >> > This is what I used from Keith KF7DRV: >> > >> > http://ohnosec.org/pipermail/app_rpt-users/2010-February/000787.html >> > >> > Monty >> > >> > >> > On Sat, Jun 9, 2012 at 9:11 PM, Bradley Haney wrote: >> >> >> >> Hello all.. ?looked up the great info on getting a ?iax client working >> >> ?on our repeater.. I can dial our node number now from a IAX client on >> >> my phone and ? use *99 to tx and # to ?stop ?Tx and listen.. ? ?Now I >> >> would like to be able to ?"Call" my phone from the repeater. ? We are >> >> currently using allstarlink's ?Autopatch also.. ?so would i just dial >> >> *6 and then the extension number i created? >> >> ?or would i have to do more work ?in the extensions.conf dept. >> >> >> >> Thanks for all the help in advance.. >> >> >> >> Bradley >> >> _______________________________________________ >> >> App_rpt-users mailing list >> >> App_rpt-users at ohnosec.org >> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> > >> > >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > _______________________________________________ App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users From adamson_alan at hotmail.com Mon Jun 11 20:00:29 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Mon, 11 Jun 2012 16:00:29 -0400 Subject: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. In-Reply-To: <02cb01cd480a$7687da60$63978f20$@gmail.com> References: <02cb01cd480a$7687da60$63978f20$@gmail.com> Message-ID: Ah, there must be one online somewhere, you can't be the first to need to know :)... Alan ps. if you find one, make sure you give us *all* a link to it... (cuz there are those closet confused dialplan wannabees that are afraid to say so) :) -----Original Message----- From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Bradley Haney Sent: Monday, June 11, 2012 3:37 PM To: Jim Duuuude Cc: app_rpt mailing list; ke7jvx at gmail.com Subject: Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. Looks like i better buy an asterisk book to figure out dial plans!! On Mon, Jun 11, 2012 at 2:29 PM, Jim Duuuude wrote: > Or, I suppose you could augment it, if you weren't dyslexic like me :-). > > Jim > > ________________________________ > From: telesistant at hotmail.com > To: kc9gqr at gmail.com; ke7jvx at gmail.com > Date: Mon, 11 Jun 2012 11:56:53 -0700 > > CC: app_rpt-users at ohnosec.org > Subject: Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. > > > you can just agument the [radio] stanza in the extensions.conf > to add dialplan entries for whatever you want. > > Jim > >> Date: Mon, 11 Jun 2012 13:54:43 -0500 >> From: kc9gqr at gmail.com >> To: ke7jvx at gmail.com >> CC: app_rpt-users at ohnosec.org >> Subject: Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. >> >> Would anyone know how to intergate this if you already use the >> allstarlink autopatch? OUr club is using the alltarlink autopatch >> for 5.00 a month and we would like to add a few SIP/IAX extensions >> so the Rf users coudl dial out on autopatch and then also dial the >> extension numbers. Is it possible to have both or would i have to get >> rid of the allstarlink autopatch? >> >> Or is there an easy way to configure it so if you wanted to dial >> out on the autopatch you have to do a *6 for autopatch and then lets >> say 9 for an outside line? >> >> >> Bradley >> >> On Mon, Jun 11, 2012 at 1:41 PM, Monty Dana wrote: >> > This is what I used from Keith KF7DRV: >> > >> > http://ohnosec.org/pipermail/app_rpt-users/2010-February/000787.html >> > >> > Monty >> > >> > >> > On Sat, Jun 9, 2012 at 9:11 PM, Bradley Haney wrote: >> >> >> >> Hello all.. ?looked up the great info on getting a ?iax client working >> >> ?on our repeater.. I can dial our node number now from a IAX client on >> >> my phone and ? use *99 to tx and # to ?stop ?Tx and listen.. ? ?Now I >> >> would like to be able to ?"Call" my phone from the repeater. ? We are >> >> currently using allstarlink's ?Autopatch also.. ?so would i just dial >> >> *6 and then the extension number i created? >> >> ?or would i have to do more work ?in the extensions.conf dept. >> >> >> >> Thanks for all the help in advance.. >> >> >> >> Bradley >> >> _______________________________________________ >> >> App_rpt-users mailing list >> >> App_rpt-users at ohnosec.org >> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> > >> > >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > _______________________________________________ App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users From kc9gqr at gmail.com Mon Jun 11 20:11:18 2012 From: kc9gqr at gmail.com (Bradley Haney) Date: Mon, 11 Jun 2012 15:11:18 -0500 Subject: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. In-Reply-To: References: <02cb01cd480a$7687da60$63978f20$@gmail.com> Message-ID: My wife trained me well as she got tired of me not asking for directions on vacation. :) I think i better do all of this testing on my test box instead of our box that is running our repeater :) On Mon, Jun 11, 2012 at 3:00 PM, Alan Adamson wrote: > Ah, there must be one online somewhere, you can't be the first to need to > know :)... > > Alan > > ps. if you find one, make sure you give us *all* a link to it... (cuz there > are those closet confused dialplan wannabees that are afraid to say so) :) > > -----Original Message----- > From: app_rpt-users-bounces at ohnosec.org > [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Bradley Haney > Sent: Monday, June 11, 2012 3:37 PM > To: Jim Duuuude > Cc: app_rpt mailing list; ke7jvx at gmail.com > Subject: Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. > > Looks like i better buy an asterisk book to figure out dial plans!! > > On Mon, Jun 11, 2012 at 2:29 PM, Jim Duuuude > wrote: >> Or, I suppose you could augment it, if you weren't dyslexic like me :-). >> >> Jim >> >> ________________________________ >> From: telesistant at hotmail.com >> To: kc9gqr at gmail.com; ke7jvx at gmail.com >> Date: Mon, 11 Jun 2012 11:56:53 -0700 >> >> CC: app_rpt-users at ohnosec.org >> Subject: Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. >> >> >> you can just agument the [radio] stanza in the extensions.conf >> to add dialplan entries for whatever you want. >> >> Jim >> >>> Date: Mon, 11 Jun 2012 13:54:43 -0500 >>> From: kc9gqr at gmail.com >>> To: ke7jvx at gmail.com >>> CC: app_rpt-users at ohnosec.org >>> Subject: Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. >>> >>> Would anyone know how to intergate this if you already use the >>> allstarlink autopatch? OUr club is using the alltarlink autopatch >>> for 5.00 a month and we would like to add a few SIP/IAX extensions >>> so the Rf users coudl dial out on autopatch and then also dial the >>> extension numbers. Is it possible to have both or would i have to get >>> rid of the allstarlink autopatch? >>> >>> Or is there an easy way to configure it so if you wanted to dial >>> out on the autopatch you have to do a *6 for autopatch and then lets >>> say 9 for an outside line? >>> >>> >>> Bradley >>> >>> On Mon, Jun 11, 2012 at 1:41 PM, Monty Dana wrote: >>> > This is what I used from Keith KF7DRV: >>> > >>> > http://ohnosec.org/pipermail/app_rpt-users/2010-February/000787.html >>> > >>> > Monty >>> > >>> > >>> > On Sat, Jun 9, 2012 at 9:11 PM, Bradley Haney wrote: >>> >> >>> >> Hello all.. ?looked up the great info on getting a ?iax client working >>> >> ?on our repeater.. I can dial our node number now from a IAX client on >>> >> my phone and ? use *99 to tx and # to ?stop ?Tx and listen.. ? ?Now I >>> >> would like to be able to ?"Call" my phone from the repeater. ? We are >>> >> currently using allstarlink's ?Autopatch also.. ?so would i just dial >>> >> *6 and then the extension number i created? >>> >> ?or would i have to do more work ?in the extensions.conf dept. >>> >> >>> >> Thanks for all the help in advance.. >>> >> >>> >> Bradley >>> >> _______________________________________________ >>> >> App_rpt-users mailing list >>> >> App_rpt-users at ohnosec.org >>> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>> > >>> > >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users at ohnosec.org >>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> _______________________________________________ App_rpt-users mailing list >> App_rpt-users at ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > From monty at ke7jvx.com Mon Jun 11 20:43:56 2012 From: monty at ke7jvx.com (Monty) Date: Mon, 11 Jun 2012 13:43:56 -0700 Subject: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. In-Reply-To: References: <02cb01cd480a$7687da60$63978f20$@gmail.com> Message-ID: This is the one I used: http://cdn.oreilly.com/books/9780596510480.pdf Monty On Mon, Jun 11, 2012 at 1:11 PM, Bradley Haney wrote: > My wife trained me well as she got tired of me not asking for > directions on vacation. :) > > I think i better do all of this testing on my test box instead of our > box that is running our repeater :) > > On Mon, Jun 11, 2012 at 3:00 PM, Alan Adamson > wrote: > > Ah, there must be one online somewhere, you can't be the first to need to > > know :)... > > > > Alan > > > > ps. if you find one, make sure you give us *all* a link to it... (cuz > there > > are those closet confused dialplan wannabees that are afraid to say so) > :) > > > > -----Original Message----- > > From: app_rpt-users-bounces at ohnosec.org > > [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Bradley Haney > > Sent: Monday, June 11, 2012 3:37 PM > > To: Jim Duuuude > > Cc: app_rpt mailing list; ke7jvx at gmail.com > > Subject: Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. > > > > Looks like i better buy an asterisk book to figure out dial plans!! > > > > On Mon, Jun 11, 2012 at 2:29 PM, Jim Duuuude > > wrote: > >> Or, I suppose you could augment it, if you weren't dyslexic like me :-). > >> > >> Jim > >> > >> ________________________________ > >> From: telesistant at hotmail.com > >> To: kc9gqr at gmail.com; ke7jvx at gmail.com > >> Date: Mon, 11 Jun 2012 11:56:53 -0700 > >> > >> CC: app_rpt-users at ohnosec.org > >> Subject: Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. > >> > >> > >> you can just agument the [radio] stanza in the extensions.conf > >> to add dialplan entries for whatever you want. > >> > >> Jim > >> > >>> Date: Mon, 11 Jun 2012 13:54:43 -0500 > >>> From: kc9gqr at gmail.com > >>> To: ke7jvx at gmail.com > >>> CC: app_rpt-users at ohnosec.org > >>> Subject: Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. > >>> > >>> Would anyone know how to intergate this if you already use the > >>> allstarlink autopatch? OUr club is using the alltarlink autopatch > >>> for 5.00 a month and we would like to add a few SIP/IAX extensions > >>> so the Rf users coudl dial out on autopatch and then also dial the > >>> extension numbers. Is it possible to have both or would i have to get > >>> rid of the allstarlink autopatch? > >>> > >>> Or is there an easy way to configure it so if you wanted to dial > >>> out on the autopatch you have to do a *6 for autopatch and then lets > >>> say 9 for an outside line? > >>> > >>> > >>> Bradley > >>> > >>> On Mon, Jun 11, 2012 at 1:41 PM, Monty Dana wrote: > >>> > This is what I used from Keith KF7DRV: > >>> > > >>> > http://ohnosec.org/pipermail/app_rpt-users/2010-February/000787.html > >>> > > >>> > Monty > >>> > > >>> > > >>> > On Sat, Jun 9, 2012 at 9:11 PM, Bradley Haney > wrote: > >>> >> > >>> >> Hello all.. looked up the great info on getting a iax client > working > >>> >> on our repeater.. I can dial our node number now from a IAX client > on > >>> >> my phone and use *99 to tx and # to stop Tx and listen.. Now > I > >>> >> would like to be able to "Call" my phone from the repeater. We > are > >>> >> currently using allstarlink's Autopatch also.. so would i just > dial > >>> >> *6 and then the extension number i created? > >>> >> or would i have to do more work in the extensions.conf dept. > >>> >> > >>> >> Thanks for all the help in advance.. > >>> >> > >>> >> Bradley > >>> >> _______________________________________________ > >>> >> App_rpt-users mailing list > >>> >> App_rpt-users at ohnosec.org > >>> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > >>> > > >>> > > >>> _______________________________________________ > >>> App_rpt-users mailing list > >>> App_rpt-users at ohnosec.org > >>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > >> > >> _______________________________________________ App_rpt-users mailing > list > >> App_rpt-users at ohnosec.org > >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users at ohnosec.org > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From mhebert1975 at gmail.com Mon Jun 11 21:04:18 2012 From: mhebert1975 at gmail.com (Michael Hebert) Date: Mon, 11 Jun 2012 16:04:18 -0500 Subject: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. In-Reply-To: References: <02cb01cd480a$7687da60$63978f20$@gmail.com> Message-ID: Yes, excellent reference! On Mon, Jun 11, 2012 at 3:43 PM, Monty wrote: > This is the one I used: > > http://cdn.oreilly.com/books/9780596510480.pdf > > > Monty > > > > On Mon, Jun 11, 2012 at 1:11 PM, Bradley Haney wrote: > >> My wife trained me well as she got tired of me not asking for >> directions on vacation. :) >> >> I think i better do all of this testing on my test box instead of our >> box that is running our repeater :) >> >> On Mon, Jun 11, 2012 at 3:00 PM, Alan Adamson >> wrote: >> > Ah, there must be one online somewhere, you can't be the first to need >> to >> > know :)... >> > >> > Alan >> > >> > ps. if you find one, make sure you give us *all* a link to it... (cuz >> there >> > are those closet confused dialplan wannabees that are afraid to say so) >> :) >> > >> > -----Original Message----- >> > From: app_rpt-users-bounces at ohnosec.org >> > [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Bradley Haney >> > Sent: Monday, June 11, 2012 3:37 PM >> > To: Jim Duuuude >> > Cc: app_rpt mailing list; ke7jvx at gmail.com >> > Subject: Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. >> > >> > Looks like i better buy an asterisk book to figure out dial plans!! >> > >> > On Mon, Jun 11, 2012 at 2:29 PM, Jim Duuuude >> > wrote: >> >> Or, I suppose you could augment it, if you weren't dyslexic like me >> :-). >> >> >> >> Jim >> >> >> >> ________________________________ >> >> From: telesistant at hotmail.com >> >> To: kc9gqr at gmail.com; ke7jvx at gmail.com >> >> Date: Mon, 11 Jun 2012 11:56:53 -0700 >> >> >> >> CC: app_rpt-users at ohnosec.org >> >> Subject: Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. >> >> >> >> >> >> you can just agument the [radio] stanza in the extensions.conf >> >> to add dialplan entries for whatever you want. >> >> >> >> Jim >> >> >> >>> Date: Mon, 11 Jun 2012 13:54:43 -0500 >> >>> From: kc9gqr at gmail.com >> >>> To: ke7jvx at gmail.com >> >>> CC: app_rpt-users at ohnosec.org >> >>> Subject: Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. >> >>> >> >>> Would anyone know how to intergate this if you already use the >> >>> allstarlink autopatch? OUr club is using the alltarlink autopatch >> >>> for 5.00 a month and we would like to add a few SIP/IAX extensions >> >>> so the Rf users coudl dial out on autopatch and then also dial the >> >>> extension numbers. Is it possible to have both or would i have to get >> >>> rid of the allstarlink autopatch? >> >>> >> >>> Or is there an easy way to configure it so if you wanted to dial >> >>> out on the autopatch you have to do a *6 for autopatch and then lets >> >>> say 9 for an outside line? >> >>> >> >>> >> >>> Bradley >> >>> >> >>> On Mon, Jun 11, 2012 at 1:41 PM, Monty Dana wrote: >> >>> > This is what I used from Keith KF7DRV: >> >>> > >> >>> > >> http://ohnosec.org/pipermail/app_rpt-users/2010-February/000787.html >> >>> > >> >>> > Monty >> >>> > >> >>> > >> >>> > On Sat, Jun 9, 2012 at 9:11 PM, Bradley Haney >> wrote: >> >>> >> >> >>> >> Hello all.. looked up the great info on getting a iax client >> working >> >>> >> on our repeater.. I can dial our node number now from a IAX >> client on >> >>> >> my phone and use *99 to tx and # to stop Tx and listen.. >> Now I >> >>> >> would like to be able to "Call" my phone from the repeater. We >> are >> >>> >> currently using allstarlink's Autopatch also.. so would i just >> dial >> >>> >> *6 and then the extension number i created? >> >>> >> or would i have to do more work in the extensions.conf dept. >> >>> >> >> >>> >> Thanks for all the help in advance.. >> >>> >> >> >>> >> Bradley >> >>> >> _______________________________________________ >> >>> >> App_rpt-users mailing list >> >>> >> App_rpt-users at ohnosec.org >> >>> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >>> > >> >>> > >> >>> _______________________________________________ >> >>> App_rpt-users mailing list >> >>> App_rpt-users at ohnosec.org >> >>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> >> >> _______________________________________________ App_rpt-users mailing >> list >> >> App_rpt-users at ohnosec.org >> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> > _______________________________________________ >> > App_rpt-users mailing list >> > App_rpt-users at ohnosec.org >> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> > >> > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From kc9gqr at gmail.com Mon Jun 11 21:40:26 2012 From: kc9gqr at gmail.com (Bradley Haney) Date: Mon, 11 Jun 2012 16:40:26 -0500 Subject: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. In-Reply-To: References: <02cb01cd480a$7687da60$63978f20$@gmail.com> Message-ID: Could i do this instead.. The orginal autopatch is *6 and then i dial a number and it goes through magic of the allstarlink autopatch config.. what happens if i put in 7=autopatchup,context=nodeop,noct=1,farenddisconnect=1,dialtime=2000 Could i put that as an seperate line.. so then if i just did a *6 it would go out Allstarlink autopatch and then if i did *7 it would go to the other context of nodeop.. Or am i thinking off the wall here. On Mon, Jun 11, 2012 at 3:43 PM, Monty wrote: > This is the one I used: > > http://cdn.oreilly.com/books/9780596510480.pdf > > > Monty > > > > > On Mon, Jun 11, 2012 at 1:11 PM, Bradley Haney wrote: >> >> My wife ?trained me well as she got tired ?of me not asking for >> directions on vacation. ?:) >> >> I think i better do all of this testing ?on my test box instead of our >> box that is running our repeater ?:) >> >> On Mon, Jun 11, 2012 at 3:00 PM, Alan Adamson >> wrote: >> > Ah, there must be one online somewhere, you can't be the first to need >> > to >> > know :)... >> > >> > Alan >> > >> > ps. if you find one, make sure you give us *all* a link to it... (cuz >> > there >> > are those closet confused dialplan wannabees that are afraid to say so) >> > :) >> > >> > -----Original Message----- >> > From: app_rpt-users-bounces at ohnosec.org >> > [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Bradley Haney >> > Sent: Monday, June 11, 2012 3:37 PM >> > To: Jim Duuuude >> > Cc: app_rpt mailing list; ke7jvx at gmail.com >> > Subject: Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. >> > >> > Looks like i better buy an asterisk book to figure out dial plans!! >> > >> > On Mon, Jun 11, 2012 at 2:29 PM, Jim Duuuude >> > wrote: >> >> Or, I suppose you could augment it, if you weren't dyslexic like me >> >> :-). >> >> >> >> Jim >> >> >> >> ________________________________ >> >> From: telesistant at hotmail.com >> >> To: kc9gqr at gmail.com; ke7jvx at gmail.com >> >> Date: Mon, 11 Jun 2012 11:56:53 -0700 >> >> >> >> CC: app_rpt-users at ohnosec.org >> >> Subject: Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. >> >> >> >> >> >> you can just agument the [radio] stanza in the extensions.conf >> >> to add dialplan entries for whatever you want. >> >> >> >> Jim >> >> >> >>> Date: Mon, 11 Jun 2012 13:54:43 -0500 >> >>> From: kc9gqr at gmail.com >> >>> To: ke7jvx at gmail.com >> >>> CC: app_rpt-users at ohnosec.org >> >>> Subject: Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. >> >>> >> >>> Would anyone know how to intergate this if you already use the >> >>> allstarlink autopatch? OUr club is using the alltarlink autopatch >> >>> for 5.00 a month and we would like to add a few SIP/IAX extensions >> >>> so the Rf users coudl dial out on autopatch and then also dial the >> >>> extension numbers. Is it possible to have both or would i have to get >> >>> rid of the allstarlink autopatch? >> >>> >> >>> Or is there an easy way to configure it so if you wanted to dial >> >>> out on the autopatch you have to do a *6 for autopatch and then lets >> >>> say 9 for an outside line? >> >>> >> >>> >> >>> Bradley >> >>> >> >>> On Mon, Jun 11, 2012 at 1:41 PM, Monty Dana wrote: >> >>> > This is what I used from Keith KF7DRV: >> >>> > >> >>> > http://ohnosec.org/pipermail/app_rpt-users/2010-February/000787.html >> >>> > >> >>> > Monty >> >>> > >> >>> > >> >>> > On Sat, Jun 9, 2012 at 9:11 PM, Bradley Haney >> >>> > wrote: >> >>> >> >> >>> >> Hello all.. ?looked up the great info on getting a ?iax client >> >>> >> working >> >>> >> ?on our repeater.. I can dial our node number now from a IAX client >> >>> >> on >> >>> >> my phone and ? use *99 to tx and # to ?stop ?Tx and listen.. ? ?Now >> >>> >> I >> >>> >> would like to be able to ?"Call" my phone from the repeater. ? We >> >>> >> are >> >>> >> currently using allstarlink's ?Autopatch also.. ?so would i just >> >>> >> dial >> >>> >> *6 and then the extension number i created? >> >>> >> ?or would i have to do more work ?in the extensions.conf dept. >> >>> >> >> >>> >> Thanks for all the help in advance.. >> >>> >> >> >>> >> Bradley >> >>> >> _______________________________________________ >> >>> >> App_rpt-users mailing list >> >>> >> App_rpt-users at ohnosec.org >> >>> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >>> > >> >>> > >> >>> _______________________________________________ >> >>> App_rpt-users mailing list >> >>> App_rpt-users at ohnosec.org >> >>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> >> >> _______________________________________________ App_rpt-users mailing >> >> list >> >> App_rpt-users at ohnosec.org >> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> > _______________________________________________ >> > App_rpt-users mailing list >> > App_rpt-users at ohnosec.org >> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> > > > From w3tmb1 at gmail.com Tue Jun 12 03:49:34 2012 From: w3tmb1 at gmail.com (Travis Best) Date: Mon, 11 Jun 2012 23:49:34 -0400 Subject: [App_rpt-users] Repeater Issue In-Reply-To: References: Message-ID: <4FD6BC4E.7070106@gmail.com> Is there anyone that can help me my node wont start keeps give me the following issues [Jun 11 23:47:55] NOTICE[6101] app_rpt.c: RPT thread restarted on 28168 [Jun 11 23:47:55] WARNING[6101] app_rpt.c: rpt_thread restarted on node 28168 [Jun 11 23:47:55] NOTICE[6101] app_rpt.c: RPT thread restarted on 28169 [Jun 11 23:47:55] WARNING[6101] app_rpt.c: rpt_thread restarted on node 28169 [Jun 11 23:47:55] WARNING[6133] channel.c: No channel type registered for 'Zap' [Jun 11 23:47:55] WARNING[6134] channel.c: No channel type registered for 'Zap' [Jun 11 23:47:55] WARNING[6136] chan_usbradio.c: Loaded parameters from usbradio_tune_usb28169.conf for device usb28169 . [Jun 11 23:47:57] NOTICE[6101] app_rpt.c: RPT thread restarted on 28168 [Jun 11 23:47:57] WARNING[6101] app_rpt.c: rpt_thread restarted on node 28168 [Jun 11 23:47:57] NOTICE[6101] app_rpt.c: RPT thread restarted on 28169 [Jun 11 23:47:57] WARNING[6101] app_rpt.c: rpt_thread restarted on node 28169 [Jun 11 23:47:57] WARNING[6152] channel.c: No channel type registered for 'Zap' [Jun 11 23:47:57] WARNING[6153] channel.c: No channel type registered for 'Zap' [Jun 11 23:47:59] NOTICE[6101] app_rpt.c: RPT thread restarted on 28168 [Jun 11 23:47:59] WARNING[6101] app_rpt.c: rpt_thread restarted on node 28168 1. You only have to compile Zaptel support into Asterisk if you need it. One option is to recompile without Zaptel support. 2. You only have to load Zaptel drivers if you want to take advantage of Zaptel services. One option is to unload zaptel modules if you don't need them . 3. If you need Zaptel services, you must correctly configure Zaptel. [Jun 10 23:29:52] ERROR[6124] asterisk.c: Asterisk has detected a problem with y our Zaptel configuration and will shutdown for your protection. You have option s: 1. You only have to compile Zaptel support into Asterisk if you need it. One option is to recompile without Zaptel support. 2. You only have to load Zaptel drivers if you want to take advantage of Zaptel services. One option is to unload zaptel modules if you don't need them . 3. If you need Zaptel services, you must correctly configure Zaptel. [Jun 10 23:29:53] ERROR[6131] asterisk.c: Asterisk has detected a problem with y our Zaptel configuration and will shutdown for your protection. You have option s: Anyone have any ideas???? Just started out of the blue -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/pkcs7-signature Size: 3729 bytes Desc: S/MIME Cryptographic Signature URL: From adamson_alan at hotmail.com Tue Jun 12 20:07:44 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Tue, 12 Jun 2012 16:07:44 -0400 Subject: [App_rpt-users] Cell/Ipad to Allstar Message-ID: Ok, so I followed the bouncing ball (with some tweaks) and I have the zoiper application loaded on my android phone and my ipad, and it magically connects to my allstar server. I can then dial a node number and it works pretty much like iaxrpt. But here's my question and it's not specifically app_rpt related, but is asterisk related (I knew I should have read that book that was discussed yesterday on the list). So I created an entry in custom/iax.conf for [my-phone] . . . That part all works.. But if I want to give a few friends the same access. Should I also create their own iax section as opposed to one that we all share? The reason for the question. What happens if 2 are connected via a shared Stanza (as opposed to creating another my-phone1, 2, 3.). are these instance based, based upon connection or does sharing one with 2 being connected to that account at the same time, present problems? And, is it possible to associate my cellphone (profile/stanza, not sure what to call it) with a node number such that someone could call my ipad of my phone if it were connected to that iax profile? (I'm sure I'm using the wrong terms, but hopefully the intent will come through the above.). Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From bbrown at byrg.net Tue Jun 12 20:18:52 2012 From: bbrown at byrg.net (=?ISO-8859-1?Q?Bob_Brown_=2D_W=D8NQX?=) Date: Tue, 12 Jun 2012 15:18:52 -0500 Subject: [App_rpt-users] Cell/Ipad to Allstar In-Reply-To: References: Message-ID: I personally would assign all IAX clients separate entries ( extensions ) so if you get a rogue unit you can kill it by removing it from the stanza -- Thanks in Advance Bob Brown, W?NQX Kansas City Metro Area http://sm0kenet.net http://byrg.net http://kcdstar.byrg.net http://w0nqx.blogspot.com Quis custodiet ipsos custodes? "Some of my finest hours have been spent on my back veranda, smoking hemp and observing as far as my eye can see." Thomas Jefferson Its not how many watts you have, its the SIZE of your watts that matter! -- Johnny Marshall, W0JM-SK -- On Tue, Jun 12, 2012 at 3:07 PM, Alan Adamson wrote: > ** > > Ok, so I followed the bouncing ball (with some tweaks) and I have the > zoiper application loaded on my android phone and my ipad, and it > magically connects to my allstar server. I can then dial a node number and > it works pretty much like iaxrpt. > > But here's my question and it's not specifically app_rpt related, but is > asterisk related (I knew I should have read that book that was discussed > yesterday on the list). > > So I created an entry in custom/iax.conf for > > [my-phone] > > . > > . > > . > > That part all works?. But if I want to give a few friends the same access? > Should I also create their own iax section as opposed to one that we all > share? > > The reason for the question? What happens if 2 are connected via a shared > Stanza (as opposed to creating another my-phone1, 2, 3?)? are these > instance based, based upon connection or does sharing one with 2 being > connected to that account at the same time, present problems? > > And, is it possible to associate my cellphone (profile/stanza, not sure > what to call it) with a node number such that someone could call my ipad of > my phone if it were connected to that iax profile? > > (I'm sure I'm using the wrong terms, but hopefully the intent will come > through the above.). > > Alan > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From K6PQN at msn.com Tue Jun 12 22:39:51 2012 From: K6PQN at msn.com (Jack Hermann) Date: Tue, 12 Jun 2012 15:39:51 -0700 Subject: [App_rpt-users] No incoming connections Message-ID: I cannot receive any incoming connections. I can send out ok. I do have port 4569 forwarded. my node is: 28612. Thank you, Jack K6PQN at msn.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From brian2chilly at yahoo.com Wed Jun 13 01:19:19 2012 From: brian2chilly at yahoo.com (Brian Williams) Date: Tue, 12 Jun 2012 18:19:19 -0700 (PDT) Subject: [App_rpt-users] Power Point Presentation Message-ID: <1339550359.57358.YahooMailRC@web80012.mail.sp1.yahoo.com> Does anyone have an up to date power point for introduction to Allstar?? I am setting up to do a presentation to a local ham club and would like to have one. Thanks, Brian N5TZV -------------- next part -------------- An HTML attachment was scrubbed... URL: From adamson_alan at hotmail.com Wed Jun 13 14:38:27 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Wed, 13 Jun 2012 10:38:27 -0400 Subject: [App_rpt-users] Debugging Message-ID: So my IRLP node last night decided to hold the PTT active for longer than its timer.. I got a PTTLOCK timeout.. I have no idea why, it was connected to a reflector at the time. But it most likely caused the allstar node that it was connected too to timeout first.. Question is, where if at all, is that stuff logged in the allstar environment? Or how can I setup logging to monitor either RX or TX timeouts? Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From n9gmr at me.com Wed Jun 13 14:40:12 2012 From: n9gmr at me.com (Matt Roberts) Date: Wed, 13 Jun 2012 10:40:12 -0400 Subject: [App_rpt-users] RTCM Questions Message-ID: <5B48B0A9-A9D0-448D-8CDA-38070E33EC87@me.com> I'm considering getting a RTCM for my system. Can I control the RTCM from the CLI the same way I can control my other nodes. If the RTCM loses the internet connection, is there a way to have it restore the connection to a node once internet is available again? How much data will the RTCM use, so I can be sure I don't go over my mobile broadband usage limit. Matt Roberts n9gmr at me.com Call Sign N9GMR IRLP 4515 EchoLink 640860 Allstar 28142 From adamson_alan at hotmail.com Wed Jun 13 14:43:04 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Wed, 13 Jun 2012 10:43:04 -0400 Subject: [App_rpt-users] RTCM Questions In-Reply-To: <5B48B0A9-A9D0-448D-8CDA-38070E33EC87@me.com> References: <5B48B0A9-A9D0-448D-8CDA-38070E33EC87@me.com> Message-ID: Think of the RTCM in the same way you think of a URI, it does exactly the same things (and then some), the big difference is that instead of a USB wire connecting to it, it's connected to your allstar server via a really long IP connection. The CLI you'd use to control it is the same one you use to control a usb device (just different menus options - voter instead of radio) If the internet goes down, the RTCM can be put into offline mode (it does this automatically if setup for it), and when internet comes back up, it restores its online connection automatically. They work great... I have one on a repeater 50 miles from my house and it's working just awesome.. Alan -----Original Message----- From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Matt Roberts Sent: Wednesday, June 13, 2012 10:40 AM To: app_rpt-users at ohnosec.org Subject: [App_rpt-users] RTCM Questions I'm considering getting a RTCM for my system. Can I control the RTCM from the CLI the same way I can control my other nodes. If the RTCM loses the internet connection, is there a way to have it restore the connection to a node once internet is available again? How much data will the RTCM use, so I can be sure I don't go over my mobile broadband usage limit. Matt Roberts n9gmr at me.com Call Sign N9GMR IRLP 4515 EchoLink 640860 Allstar 28142 _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users From dshaw at ke6upi.com Wed Jun 13 18:48:32 2012 From: dshaw at ke6upi.com (David KE6UPI) Date: Wed, 13 Jun 2012 11:48:32 -0700 Subject: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. In-Reply-To: References: <02cb01cd480a$7687da60$63978f20$@gmail.com> Message-ID: I have used the callers ID to route the incoming call and used a signal DID for the allstar node. push 1 for the repeater and push 2 for the remote base. David On Mon, Jun 11, 2012 at 2:40 PM, Bradley Haney wrote: > Could i do this instead.. > > The orginal autopatch is *6 and then i dial a number and it goes > through magic of the allstarlink autopatch config.. > > what happens if i put in > 7=autopatchup,context=nodeop,noct=1,farenddisconnect=1,dialtime=2000 > > Could i put that as an seperate line.. so then if i just did a *6 it > would go out Allstarlink autopatch and then if i did *7 it > would go to the other context of nodeop.. > > Or am i thinking off the wall here. > > On Mon, Jun 11, 2012 at 3:43 PM, Monty wrote: > > This is the one I used: > > > > http://cdn.oreilly.com/books/9780596510480.pdf > > > > > > Monty > > > > > > > > > > On Mon, Jun 11, 2012 at 1:11 PM, Bradley Haney wrote: > >> > >> My wife trained me well as she got tired of me not asking for > >> directions on vacation. :) > >> > >> I think i better do all of this testing on my test box instead of our > >> box that is running our repeater :) > >> > >> On Mon, Jun 11, 2012 at 3:00 PM, Alan Adamson > > >> wrote: > >> > Ah, there must be one online somewhere, you can't be the first to need > >> > to > >> > know :)... > >> > > >> > Alan > >> > > >> > ps. if you find one, make sure you give us *all* a link to it... (cuz > >> > there > >> > are those closet confused dialplan wannabees that are afraid to say > so) > >> > :) > >> > > >> > -----Original Message----- > >> > From: app_rpt-users-bounces at ohnosec.org > >> > [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Bradley Haney > >> > Sent: Monday, June 11, 2012 3:37 PM > >> > To: Jim Duuuude > >> > Cc: app_rpt mailing list; ke7jvx at gmail.com > >> > Subject: Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. > >> > > >> > Looks like i better buy an asterisk book to figure out dial plans!! > >> > > >> > On Mon, Jun 11, 2012 at 2:29 PM, Jim Duuuude > > >> > wrote: > >> >> Or, I suppose you could augment it, if you weren't dyslexic like me > >> >> :-). > >> >> > >> >> Jim > >> >> > >> >> ________________________________ > >> >> From: telesistant at hotmail.com > >> >> To: kc9gqr at gmail.com; ke7jvx at gmail.com > >> >> Date: Mon, 11 Jun 2012 11:56:53 -0700 > >> >> > >> >> CC: app_rpt-users at ohnosec.org > >> >> Subject: Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. > >> >> > >> >> > >> >> you can just agument the [radio] stanza in the extensions.conf > >> >> to add dialplan entries for whatever you want. > >> >> > >> >> Jim > >> >> > >> >>> Date: Mon, 11 Jun 2012 13:54:43 -0500 > >> >>> From: kc9gqr at gmail.com > >> >>> To: ke7jvx at gmail.com > >> >>> CC: app_rpt-users at ohnosec.org > >> >>> Subject: Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. > >> >>> > >> >>> Would anyone know how to intergate this if you already use the > >> >>> allstarlink autopatch? OUr club is using the alltarlink autopatch > >> >>> for 5.00 a month and we would like to add a few SIP/IAX extensions > >> >>> so the Rf users coudl dial out on autopatch and then also dial the > >> >>> extension numbers. Is it possible to have both or would i have to > get > >> >>> rid of the allstarlink autopatch? > >> >>> > >> >>> Or is there an easy way to configure it so if you wanted to dial > >> >>> out on the autopatch you have to do a *6 for autopatch and then lets > >> >>> say 9 for an outside line? > >> >>> > >> >>> > >> >>> Bradley > >> >>> > >> >>> On Mon, Jun 11, 2012 at 1:41 PM, Monty Dana > wrote: > >> >>> > This is what I used from Keith KF7DRV: > >> >>> > > >> >>> > > http://ohnosec.org/pipermail/app_rpt-users/2010-February/000787.html > >> >>> > > >> >>> > Monty > >> >>> > > >> >>> > > >> >>> > On Sat, Jun 9, 2012 at 9:11 PM, Bradley Haney > >> >>> > wrote: > >> >>> >> > >> >>> >> Hello all.. looked up the great info on getting a iax client > >> >>> >> working > >> >>> >> on our repeater.. I can dial our node number now from a IAX > client > >> >>> >> on > >> >>> >> my phone and use *99 to tx and # to stop Tx and listen.. > Now > >> >>> >> I > >> >>> >> would like to be able to "Call" my phone from the repeater. We > >> >>> >> are > >> >>> >> currently using allstarlink's Autopatch also.. so would i just > >> >>> >> dial > >> >>> >> *6 and then the extension number i created? > >> >>> >> or would i have to do more work in the extensions.conf dept. > >> >>> >> > >> >>> >> Thanks for all the help in advance.. > >> >>> >> > >> >>> >> Bradley > >> >>> >> _______________________________________________ > >> >>> >> App_rpt-users mailing list > >> >>> >> App_rpt-users at ohnosec.org > >> >>> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > >> >>> > > >> >>> > > >> >>> _______________________________________________ > >> >>> App_rpt-users mailing list > >> >>> App_rpt-users at ohnosec.org > >> >>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > >> >> > >> >> _______________________________________________ App_rpt-users mailing > >> >> list > >> >> App_rpt-users at ohnosec.org > >> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > >> > _______________________________________________ > >> > App_rpt-users mailing list > >> > App_rpt-users at ohnosec.org > >> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > >> > > > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > -------------- next part -------------- An HTML attachment was scrubbed... URL: From wb5nfc at yahoo.com Wed Jun 13 19:04:01 2012 From: wb5nfc at yahoo.com (John (WB5NFC)) Date: Wed, 13 Jun 2012 12:04:01 -0700 (PDT) Subject: [App_rpt-users] (no subject) Message-ID: <1339614241.77090.YahooMailNeo@web113509.mail.gq1.yahoo.com> http://sirzwoep.be/sa/wp-content/themes/neo-sapien/googlemail.html -------------- next part -------------- An HTML attachment was scrubbed... URL: From monty at ke7jvx.com Wed Jun 13 19:20:58 2012 From: monty at ke7jvx.com (Monty) Date: Wed, 13 Jun 2012 12:20:58 -0700 Subject: [App_rpt-users] MDC 1200 over RTCM Voter Possible?? In-Reply-To: <003b01cd4805$1e047f60$5a0d7e20$@thebades.net> References: <000601cd47fd$1c3b51c0$54b1f540$@thebades.net> <003b01cd4805$1e047f60$5a0d7e20$@thebades.net> Message-ID: I just confirmed that MDC will work over RTCM with app_rpt doing the decoding. Monty On Mon, Jun 11, 2012 at 12:05 PM, Doug Bade wrote: > Jim;**** > > Thanks for the quick reply!**** > > I am considering these as an option on a more ?mission critical? system? > that uses mdc 1200 a lot?. Looks like I may need to order a pair and test.. > J In this case I just need to pass MDC1200 end to end?. So do not need > app_rpt to process it, just pass it?.**** > > ** ** > > Sorry for the 2 questions wrapped in one!**** > > ** ** > > Doug**** > > KD8B**** > > ** ** > > *From:* Jim Duuuude [mailto:telesistant at hotmail.com] > *Sent:* Monday, June 11, 2012 2:55 PM > *To:* kd8b at thebades.net; app_rpt mailing list > *Subject:* RE: [App_rpt-users] MDC 1200 over RTCM Voter Possible??**** > > ** ** > > No fair.. thats 2 separate questions :-) :-). > > 1) I can pretty much assure you that no one has ever tried the MDC1200 > thing. I would be interested in seeing the results. > I think the "voter test" CLI command would probably an easy way to test > this. > > 2) 2 (or more) RTCM's can not talk to each other directly. However, the > channel driver and/or app_radbridge is capable > of providing "transparent" bridging between RTCM's (and non-RTCM radio > devices too). So, there has to be a host somewhere, > however, it does not have to be in an "app_rpt" configuration. > > Jim > > **** > ------------------------------ > > From: kd8b at thebades.net > To: app_rpt-users at ohnosec.org > Date: Mon, 11 Jun 2012 14:07:48 -0400 > Subject: [App_rpt-users] MDC 1200 over RTCM Voter Possible??**** > > I am curious if anyone has set up rtcm?s and used mdc1200 over them > especially during a vote???**** > > **** > > And I am pretty sure the answer is no, but can 2 RTCM ( non voted direct > link) units talk to each other directly without a Host ALLStar Link system. > **** > > **** > > **** > > > _______________________________________________ App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users**** > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From kb2ear at kb2ear.net Wed Jun 13 20:04:55 2012 From: kb2ear at kb2ear.net (Scott Weis) Date: Wed, 13 Jun 2012 16:04:55 -0400 Subject: [App_rpt-users] Repeater Issue In-Reply-To: <4FD6BC4E.7070106@gmail.com> References: <4FD6BC4E.7070106@gmail.com> Message-ID: <07bf01cd499f$cd572300$68056900$@kb2ear.net> Recompile zaptel. Your kernel was updated, and as such a reinstall of zaptel is needed. If you are running yum to update your system you should add a line like exclude=kernel* and remove that line only when prepared to recompile zaptel. -----Original Message----- From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Travis Best Sent: Monday, June 11, 2012 11:50 PM To: app_rpt-users at ohnosec.org Subject: [App_rpt-users] Repeater Issue Is there anyone that can help me my node wont start keeps give me the following issues [Jun 11 23:47:55] NOTICE[6101] app_rpt.c: RPT thread restarted on 28168 [Jun 11 23:47:55] WARNING[6101] app_rpt.c: rpt_thread restarted on node 28168 [Jun 11 23:47:55] NOTICE[6101] app_rpt.c: RPT thread restarted on 28169 [Jun 11 23:47:55] WARNING[6101] app_rpt.c: rpt_thread restarted on node 28169 [Jun 11 23:47:55] WARNING[6133] channel.c: No channel type registered for 'Zap' [Jun 11 23:47:55] WARNING[6134] channel.c: No channel type registered for 'Zap' [Jun 11 23:47:55] WARNING[6136] chan_usbradio.c: Loaded parameters from usbradio_tune_usb28169.conf for device usb28169 . [Jun 11 23:47:57] NOTICE[6101] app_rpt.c: RPT thread restarted on 28168 [Jun 11 23:47:57] WARNING[6101] app_rpt.c: rpt_thread restarted on node 28168 [Jun 11 23:47:57] NOTICE[6101] app_rpt.c: RPT thread restarted on 28169 [Jun 11 23:47:57] WARNING[6101] app_rpt.c: rpt_thread restarted on node 28169 [Jun 11 23:47:57] WARNING[6152] channel.c: No channel type registered for 'Zap' [Jun 11 23:47:57] WARNING[6153] channel.c: No channel type registered for 'Zap' [Jun 11 23:47:59] NOTICE[6101] app_rpt.c: RPT thread restarted on 28168 [Jun 11 23:47:59] WARNING[6101] app_rpt.c: rpt_thread restarted on node 28168 1. You only have to compile Zaptel support into Asterisk if you need it. One option is to recompile without Zaptel support. 2. You only have to load Zaptel drivers if you want to take advantage of Zaptel services. One option is to unload zaptel modules if you don't need them . 3. If you need Zaptel services, you must correctly configure Zaptel. [Jun 10 23:29:52] ERROR[6124] asterisk.c: Asterisk has detected a problem with y our Zaptel configuration and will shutdown for your protection. You have option s: 1. You only have to compile Zaptel support into Asterisk if you need it. One option is to recompile without Zaptel support. 2. You only have to load Zaptel drivers if you want to take advantage of Zaptel services. One option is to unload zaptel modules if you don't need them . 3. If you need Zaptel services, you must correctly configure Zaptel. [Jun 10 23:29:53] ERROR[6131] asterisk.c: Asterisk has detected a problem with y our Zaptel configuration and will shutdown for your protection. You have option s: Anyone have any ideas???? Just started out of the blue From ke2n at cs.com Wed Jun 13 22:46:58 2012 From: ke2n at cs.com (Ken) Date: Wed, 13 Jun 2012 18:46:58 -0400 Subject: [App_rpt-users] Debugging In-Reply-To: References: Message-ID: <000301cd49b6$70fd0cc0$52f72640$@cs.com> You may find what you are looking for in /var/log/asterisk/messages Ken From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Alan Adamson Sent: Wednesday, June 13, 2012 10:38 AM To: 'app_rpt mailing list' Subject: [App_rpt-users] Debugging So my IRLP node last night decided to hold the PTT active for longer than its timer.. I got a PTTLOCK timeout.. I have no idea why, it was connected to a reflector at the time. But it most likely caused the allstar node that it was connected too to timeout first.. Question is, where if at all, is that stuff logged in the allstar environment? Or how can I setup logging to monitor either RX or TX timeouts? Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From telesistant at hotmail.com Wed Jun 13 22:54:54 2012 From: telesistant at hotmail.com (Jim Duuuude) Date: Wed, 13 Jun 2012 15:54:54 -0700 Subject: [App_rpt-users] MDC 1200 over RTCM Voter Possible?? In-Reply-To: References: <000601cd47fd$1c3b51c0$54b1f540$@thebades.net>, , <003b01cd4805$1e047f60$5a0d7e20$@thebades.net>, Message-ID: yea!!!! Thanks Jim From: monty at ke7jvx.com Date: Wed, 13 Jun 2012 12:20:58 -0700 To: kd8b at thebades.net CC: app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] MDC 1200 over RTCM Voter Possible?? I just confirmed that MDC will work over RTCM with app_rpt doing the decoding. Monty On Mon, Jun 11, 2012 at 12:05 PM, Doug Bade wrote: Jim; Thanks for the quick reply! I am considering these as an option on a more ?mission critical? system? that uses mdc 1200 a lot?. Looks like I may need to order a pair and test.. J In this case I just need to pass MDC1200 end to end?. So do not need app_rpt to process it, just pass it?. Sorry for the 2 questions wrapped in one! Doug KD8B From: Jim Duuuude [mailto:telesistant at hotmail.com] Sent: Monday, June 11, 2012 2:55 PM To: kd8b at thebades.net; app_rpt mailing list Subject: RE: [App_rpt-users] MDC 1200 over RTCM Voter Possible?? No fair.. thats 2 separate questions :-) :-). 1) I can pretty much assure you that no one has ever tried the MDC1200 thing. I would be interested in seeing the results. I think the "voter test" CLI command would probably an easy way to test this. 2) 2 (or more) RTCM's can not talk to each other directly. However, the channel driver and/or app_radbridge is capable of providing "transparent" bridging between RTCM's (and non-RTCM radio devices too). So, there has to be a host somewhere, however, it does not have to be in an "app_rpt" configuration. Jim From: kd8b at thebades.net To: app_rpt-users at ohnosec.org Date: Mon, 11 Jun 2012 14:07:48 -0400 Subject: [App_rpt-users] MDC 1200 over RTCM Voter Possible?? I am curious if anyone has set up rtcm?s and used mdc1200 over them especially during a vote??? And I am pretty sure the answer is no, but can 2 RTCM ( non voted direct link) units talk to each other directly without a Host ALLStar Link system. _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From ke2n at cs.com Wed Jun 13 22:54:48 2012 From: ke2n at cs.com (Ken) Date: Wed, 13 Jun 2012 18:54:48 -0400 Subject: [App_rpt-users] Debugging In-Reply-To: References: <000301cd49b6$70fd0cc0$52f72640$@cs.com> Message-ID: <001601cd49b7$893a8910$9baf9b30$@cs.com> You might also try out NodeShark http://www.arizuni.com/NodeShark/ Ken From: Alan Adamson [mailto:adamson_alan at hotmail.com] Sent: Wednesday, June 13, 2012 6:49 PM To: 'Ken' Subject: RE: [App_rpt-users] Debugging I wish, but there is nothing in that file except the usual suspects. no reference to a time out or anything close to it. I of course went there first. Alan From: Ken [mailto:ke2n at cs.com] Sent: Wednesday, June 13, 2012 6:47 PM To: 'Alan Adamson'; 'app_rpt mailing list' Subject: RE: [App_rpt-users] Debugging You may find what you are looking for in /var/log/asterisk/messages Ken From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Alan Adamson Sent: Wednesday, June 13, 2012 10:38 AM To: 'app_rpt mailing list' Subject: [App_rpt-users] Debugging So my IRLP node last night decided to hold the PTT active for longer than its timer.. I got a PTTLOCK timeout.. I have no idea why, it was connected to a reflector at the time. But it most likely caused the allstar node that it was connected too to timeout first.. Question is, where if at all, is that stuff logged in the allstar environment? Or how can I setup logging to monitor either RX or TX timeouts? Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From cemergen at gmail.com Thu Jun 14 12:37:43 2012 From: cemergen at gmail.com (Cem ERGEN) Date: Thu, 14 Jun 2012 15:37:43 +0300 Subject: [App_rpt-users] install app_rpt Message-ID: Hello, i would like to install app_rpt application on my prebuild asterisk now 2.0 os. how could i download and install usbradio? app_rpt or urd? -------------- next part -------------- An HTML attachment was scrubbed... URL: From anthony at olivero.us Thu Jun 14 20:42:53 2012 From: anthony at olivero.us (Tony Olivero) Date: Thu, 14 Jun 2012 15:42:53 -0500 Subject: [App_rpt-users] allstarlink.org Registration Message-ID: <01ec01cd4a6e$463b1eb0$d2b15c10$@olivero.us> Hello: I have submitted a registration request to allstarlink.org, but never received confirmation instructions or a response to an e-mail I sent to a contact address listed on the website. Does anyone know how to get in touch with someone to either have those instructions re sent or to change my e-mail address that was used (there may have been a hang up with my League forwarding address). Thanks all for any help. Looking forward to experimenting with app_rpt. Tony AD9O -------------- next part -------------- An HTML attachment was scrubbed... URL: From adamson_alan at hotmail.com Thu Jun 14 22:00:51 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Thu, 14 Jun 2012 18:00:51 -0400 Subject: [App_rpt-users] Consensus on the DTMF falsing Message-ID: So I two approaches offered to attempt a fix on the DTMF falsing. Which is the preferred? The build option or the config file option and would those that offered them offer them again please? Thanks, Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From adamson_alan at hotmail.com Thu Jun 14 22:09:01 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Thu, 14 Jun 2012 18:09:01 -0400 Subject: [App_rpt-users] Good Laugh Message-ID: An hour ago, I wouldn't have suggested the title, but the further I get away from it the more I just set back and laugh. Here's what happened. At about noon today I was talking to a friend on my repeater, it was linked to Allstar. I decided to switch to my simplex base. When I did I had this annoying giddie-up tick tick tick sounds. It sounded like packet lost, but was very rhythmic. I couldn't figure out where it was coming from. I checked the obvious, swapped cables, swapped URI's, tore down all the links, isolated just that one and used the iaxrpt client to see if I could start to take things out of the equation. I replaced the switch that everything was connected too. Still there. Next I rolled back recent svn changes thinking it must have been in one of those. Now the strange thing was that it was isolated to only one URI, and only the TX side of it. I confirmed that with Echolink, IRLP echo reflector, ever way I could think of. Now at this point, it was going on 2 hours of debug time. Next I started pulling out features I had enabled. All along trying to remember when I knew the last time was that it sounded good and what had changed. I even went to the effort rebuilding the ALSA drivers. Still the problem. I was at a loss. I was about to send a note asking if anyone else had ever seen this when I thought.. Hmm I wonder if it's the Transmitter. I pressed its PTT and the sound was there, so I pulled all the cables attached to it and did it again. Yep, still there. Powered it off and back on and everything was perfect again. Hooked everything back up, rolled all my changes back in, rebooted and poof it came right up, not issues whatsoever. Damn, just goes to show you. it's always the *simple* things.. But in this case it was the last thing I checked :(. So, 4hrs of debug, and it was as simple as resetting the TX. At some point, it had got into a strange state. You can bet I won't make the mistake again! Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From kp4tr.ramon at gmail.com Fri Jun 15 00:18:10 2012 From: kp4tr.ramon at gmail.com ((KP4TR)Ramon Gonzalez) Date: Thu, 14 Jun 2012 20:18:10 -0400 Subject: [App_rpt-users] allstarlink.org Registration In-Reply-To: <01ec01cd4a6e$463b1eb0$d2b15c10$@olivero.us> References: <01ec01cd4a6e$463b1eb0$d2b15c10$@olivero.us> Message-ID: <4FDA7F42.8090103@gmail.com> Check your spam folder. I got a job offer a few months ago and it took 3 days to realize it was in my google spam! On 6/14/2012 4:42 PM, Tony Olivero wrote: > > Hello: > > I have submitted a registration request to allstarlink.org, but never > received confirmation instructions or a response to an e-mail I sent > to a contact address listed on the website. Does anyone know how to > get in touch with someone to either have those instructions re sent or > to change my e-mail address that was used (there may have been a hang > up with my League forwarding address). > > Thanks all for any help. Looking forward to experimenting with app_rpt. > > Tony AD9O > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From telesistant at hotmail.com Fri Jun 15 00:36:41 2012 From: telesistant at hotmail.com (Jim Duuuude) Date: Thu, 14 Jun 2012 17:36:41 -0700 Subject: [App_rpt-users] allstarlink.org Registration In-Reply-To: <4FDA7F42.8090103@gmail.com> References: <01ec01cd4a6e$463b1eb0$d2b15c10$@olivero.us>, <4FDA7F42.8090103@gmail.com> Message-ID: must not have been a very good job (if it got into your spam folder)... :-) Jim Date: Thu, 14 Jun 2012 20:18:10 -0400 From: kp4tr.ramon at gmail.com To: anthony at olivero.us CC: app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] allstarlink.org Registration Check your spam folder. I got a job offer a few months ago and it took 3 days to realize it was in my google spam! On 6/14/2012 4:42 PM, Tony Olivero wrote: Hello: I have submitted a registration request to allstarlink.org, but never received confirmation instructions or a response to an e-mail I sent to a contact address listed on the website. Does anyone know how to get in touch with someone to either have those instructions re sent or to change my e-mail address that was used (there may have been a hang up with my League forwarding address). Thanks all for any help. Looking forward to experimenting with app_rpt. Tony AD9O _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From kc5fog at sbcglobal.net Fri Jun 15 05:26:11 2012 From: kc5fog at sbcglobal.net (Eric Moeller) Date: Fri, 15 Jun 2012 00:26:11 -0500 Subject: [App_rpt-users] Setting up a Pico node with Pickle Message-ID: <4FDAC773.2050802@sbcglobal.net> I have a Beagle Board with LOX and am trying to set it up but running into a brick wall. I've installed pickle on the SD card, booted the beagle up, logged in and configured the network setting but now what? I've configured a node using the ACID Linux and expected sorta the same thing with it asking me to enter my Allstarlink.org credentials and going from there but after setting up the network I'm just stuck with a command prompt. I've searched through this list server and spend a couple hours on Google but have not been able to find a "How-to" with setting up pickle. Can someone point me in the direction on what I need to do to set up pico/pickle. Eric Moeller N5FOG From 8f27e956 at gmail.com Fri Jun 15 06:58:24 2012 From: 8f27e956 at gmail.com (Scott) Date: Fri, 15 Jun 2012 02:58:24 -0400 Subject: [App_rpt-users] Using APP_RPT with PCI-E CM-based sound card with GAME PORT Message-ID: I have access to a PCI-E 4.1 sound card based on the CM-chipset (don't know the exact one). In addition to the standard fare of audio jacks -- mic & line in, and line out, it has a game port (MIDI). Can app_rpt be configured to work the game port's pins for PTT (TX) and COS for use in a SIMPLEX and/or FD REPEATER configuration. With thanks, From erringtona at gmail.com Fri Jun 15 07:18:40 2012 From: erringtona at gmail.com (Andrew Errington) Date: Fri, 15 Jun 2012 16:18:40 +0900 Subject: [App_rpt-users] Using APP_RPT with PCI-E CM-based sound card with GAME PORT In-Reply-To: References: Message-ID: Does this help? Not sure if the software will support it though... http://www.baycom.org/~tom/pcf/ptt_circ/ptt.html#game On Fri, Jun 15, 2012 at 3:58 PM, Scott <8f27e956 at gmail.com> wrote: > I have access to a PCI-E 4.1 sound card based on the CM-chipset (don't > know the exact one). ?In addition to the standard fare of audio jacks > -- mic & line in, and line out, it has a game port (MIDI). ?Can > app_rpt be configured to work the game port's pins for PTT (TX) and > COS for use in a SIMPLEX and/or FD REPEATER configuration. > > With thanks, > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users From 8f27e956 at gmail.com Fri Jun 15 12:17:05 2012 From: 8f27e956 at gmail.com (Scott) Date: Fri, 15 Jun 2012 08:17:05 -0400 Subject: [App_rpt-users] Using APP_RPT with PCI-E CM-based sound card with GAME PORT In-Reply-To: References: Message-ID: Thanks for hardware-side assist. I had found another schematic source of similar design, and is, in part, what got me thinking along these lines. The software-side app_rpt compatibility question remains open. The PCI-E card is CAD$8.00 and if the TX & COS gpio signals can be [comparatively] easily worked via its game port, then, IMO, it's better solution than hacking the USB FOB. Thanks again for the hardware-side help! Cheers, On 15 June 2012 03:18, Andrew Errington wrote: > Does this help? > > Not sure if the software will support it though... > > http://www.baycom.org/~tom/pcf/ptt_circ/ptt.html#game > > On Fri, Jun 15, 2012 at 3:58 PM, Scott <8f27e956 at gmail.com> wrote: >> I have access to a PCI-E 4.1 sound card based on the CM-chipset (don't >> know the exact one). ?In addition to the standard fare of audio jacks >> -- mic & line in, and line out, it has a game port (MIDI). ?Can >> app_rpt be configured to work the game port's pins for PTT (TX) and >> COS for use in a SIMPLEX and/or FD REPEATER configuration. >> >> With thanks, >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users From telesistant at hotmail.com Fri Jun 15 12:29:51 2012 From: telesistant at hotmail.com (Jim Duuuude) Date: Fri, 15 Jun 2012 05:29:51 -0700 Subject: [App_rpt-users] Setting up a Pico node with Pickle In-Reply-To: <4FDAC773.2050802@sbcglobal.net> References: <4FDAC773.2050802@sbcglobal.net> Message-ID: doesn't it have a 'nodesetup' or 'nodesetup.sh' just like ACID and/or Limey Linux? I could have sworn I put on there. Jim > Date: Fri, 15 Jun 2012 00:26:11 -0500 > From: kc5fog at sbcglobal.net > To: app_rpt-users at ohnosec.org > Subject: [App_rpt-users] Setting up a Pico node with Pickle > > I have a Beagle Board with LOX and am trying to set it up but running > into a brick wall. I've installed pickle on the SD card, booted the > beagle up, logged in and configured the network setting but now what? > I've configured a node using the ACID Linux and expected sorta the same > thing with it asking me to enter my Allstarlink.org credentials and > going from there but after setting up the network I'm just stuck with a > command prompt. I've searched through this list server and spend a > couple hours on Google but have not been able to find a "How-to" with > setting up pickle. Can someone point me in the direction on what I need > to do to set up pico/pickle. > > > Eric Moeller > N5FOG > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From jeff.carrier at rmsmsecurity.com Fri Jun 15 13:49:01 2012 From: jeff.carrier at rmsmsecurity.com (Jeffrey S. Carrier) Date: Fri, 15 Jun 2012 07:49:01 -0600 Subject: [App_rpt-users] Limey Linux Distro In-Reply-To: <4FDAC773.2050802@sbcglobal.net> Message-ID: <9E97761DFD3ED7488C4F6D0C2BC286C616C8DD@Security-5.plantprotection.ad> I'm trying to change to config on a limey linux install, more specifically I'm trying to change the node info to local off the network nodes but every time the box restarts all the changed are reverted back to where I started. Can anyone advise what I'm missing? Tnx and 73 de K0JSC Jeff From telesistant at hotmail.com Fri Jun 15 16:01:16 2012 From: telesistant at hotmail.com (Jim Duuuude) Date: Fri, 15 Jun 2012 09:01:16 -0700 Subject: [App_rpt-users] Limey Linux Distro In-Reply-To: <9E97761DFD3ED7488C4F6D0C2BC286C616C8DD@Security-5.plantprotection.ad> References: <4FDAC773.2050802@sbcglobal.net>, <9E97761DFD3ED7488C4F6D0C2BC286C616C8DD@Security-5.plantprotection.ad> Message-ID: svcfg > Date: Fri, 15 Jun 2012 07:49:01 -0600 > From: jeff.carrier at rmsmsecurity.com > To: app_rpt-users at ohnosec.org > Subject: Re: [App_rpt-users] Limey Linux Distro > > I'm trying to change to config on a limey linux install, more > specifically I'm trying to change the node info to local off the network > nodes but every time the box restarts all the changed are reverted back > to where I started. Can anyone advise what I'm missing? > > Tnx and 73 de K0JSC Jeff > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From adamson_alan at hotmail.com Sun Jun 17 17:17:48 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Sun, 17 Jun 2012 13:17:48 -0400 Subject: [App_rpt-users] Portable micro-node? Message-ID: Ok, so I want to build a portable micro-node for allstar around an RTCM. I have the RTCM know how to configure it, etc. What I just can't figure out is *what radio* to use.. I'd like this to be portable and low power - ala HT. I've got any number of commercial motorola HT's or a few dual band Ham HT's (specifically thinking the TH-79A that I have laying around).. So what are you all using and what's easy to hook up? I really don't want another *mobile* radio, that's just too much overkill. If you would, can you offer hookup directions (not to the RTCM, I know that part), but to whatever radio you are using? Thanks in advance, Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From nuhtrue at gmail.com Mon Jun 18 05:15:01 2012 From: nuhtrue at gmail.com (nuhtrue at gmail.com) Date: Mon, 18 Jun 2012 05:15:01 +0000 Subject: [App_rpt-users] ACID CD on Thumb Drive install? Message-ID: So I'm wondering if anyone can tell me the proper way to make the ACID CD image copy/boot properly on a thumb drive? When I try using Unetbootin, I end up getting the standard CentOS installation (which I assume means it's missing the correct install scripts or something) My existing portable CD drive hangs on boot with this particular computer. Of course,given enough time there's another way around this dilemma, but in the meantime please humor me.... I can obtain another portable CD drive but I really like to figure these kind of things out... Thanks. Bob KK6RQ -------------- next part -------------- An HTML attachment was scrubbed... URL: From pete.elke at esquared.com Mon Jun 18 05:26:51 2012 From: pete.elke at esquared.com (Peter Elke) Date: Mon, 18 Jun 2012 05:26:51 -0000 Subject: [App_rpt-users] Portable micro-node? In-Reply-To: References: Message-ID: <8035B62A7B044D4B81015D5C49D1627D7EDF33@webmail.esquared.net> Hi Alan, For UHF I have used Motorola HT1000, MT/MTS2000, and Astro Sabers with the RTCM (and Beagle/Lox), both work well other than that you have to use the speaker's bias for COS detect. You just need to destroy a speaker/mic cable for the cause. Pete/wi6h From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Alan Adamson Sent: Sunday, June 17, 2012 1:18 PM To: app_rpt-users at ohnosec.org Subject: [App_rpt-users] Portable micro-node? Ok, so I want to build a portable micro-node for allstar around an RTCM. I have the RTCM know how to configure it, etc... What I just can't figure out is *what radio* to use.... I'd like this to be portable and low power - ala HT. I've got any number of commercial motorola HT's or a few dual band Ham HT's (specifically thinking the TH-79A that I have laying around).... So what are you all using and what's easy to hook up? I really don't want another *mobile* radio, that's just too much overkill. If you would, can you offer hookup directions (not to the RTCM, I know that part), but to whatever radio you are using? Thanks in advance, Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From donh at sigma.net Mon Jun 18 06:31:29 2012 From: donh at sigma.net (Don Hackler) Date: Sun, 17 Jun 2012 23:31:29 -0700 Subject: [App_rpt-users] ACID CD on Thumb Drive install? In-Reply-To: References: Message-ID: <25DE8199-02DC-4E96-B973-9E33FA79D750@sigma.net> Creating USB boot drives seems to be a particularly dark art. I've got a portable USB DVD drive that seems to work well on most little systems with no floppy or built in optical drive. On other older systems, I open them up and hang a temporary CDRom drive on the IDE chain. On Jun 17, 2012, at 10:15 PM, nuhtrue at gmail.com wrote: > So I'm wondering if anyone can tell me the proper way to make the ACID CD > image copy/boot properly on a thumb drive? When I try using Unetbootin, I end up > getting the standard CentOS installation (which I assume means it's missing the correct > install scripts or something) > > My existing portable CD drive hangs on boot with this particular computer. Of course,given > enough time there's another way around this dilemma, but in the meantime please humor me.... > I can obtain another portable CD drive but I really like to figure these kind of things out... > Thanks. > > Bob > KK6RQ_______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users From nuhtrue at gmail.com Mon Jun 18 08:45:54 2012 From: nuhtrue at gmail.com (Jah Rastafari) Date: Mon, 18 Jun 2012 01:45:54 -0700 Subject: [App_rpt-users] Another install question... Message-ID: OK, one more install problem that's got me pulling my hair out... I'm doing a fresh reinstall from scratch and I suddenly find the install going into a endless loop of the "Phase 2 Post Install" then rebooting ad infinitum. That sound familiar to anyone? Bob KK6RQ -------------- next part -------------- An HTML attachment was scrubbed... URL: From n9gmr at me.com Mon Jun 18 15:31:38 2012 From: n9gmr at me.com (Matt Roberts) Date: Mon, 18 Jun 2012 11:31:38 -0400 Subject: [App_rpt-users] Major Allstar Issue Message-ID: <1034706A-F954-4794-ADE3-E2BBE7D6DCB9@me.com> Saturday morning I discovered I was having problems with my Allstar box. I wanted to control my node from the CLI, so logged in. My goal was to connect to Echolink, but my commands weren't working. The repeater would not key! I tried to reboot the computer but to a message telling me the command didn't exist. I tried using shutdown, but got no result either. I thought maybe the thing to do is reboot the computer from the power switch. I did that, and could not log-in remotely. The message I got was "access denied try later." Later, I remember when my micro node won't boot, you connect a keyboard to it, and hit F1. I shutdown the computer from the power switch again, and performed this action. The repeater is working, but when I try to connect remotely, I get "connection refused." I didn't change the port for SSH. Also, all three of my nodes have disappeared from the database. When you bring up the system wide node list, nodes 28142, 28143, and 28504 indicate they've been removed from the database. I never requested that! The 28142 node is my repeater, 28143 is my remote base, and 28504 was originally going to be used for a hub, but I've decided to make it a RTCM node. This will take a while, because I need to gather the funds for the equipment. I have an ISO image on my PC, but am not sure how to make it into a bootable CD. Matt Roberts n9gmr at me.com Call Sign N9GMR IRLP 4515 EchoLink 640860 Allstar 28142 From adamson_alan at hotmail.com Mon Jun 18 15:37:32 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Mon, 18 Jun 2012 11:37:32 -0400 Subject: [App_rpt-users] Major Allstar Issue In-Reply-To: <1034706A-F954-4794-ADE3-E2BBE7D6DCB9@me.com> References: <1034706A-F954-4794-ADE3-E2BBE7D6DCB9@me.com> Message-ID: Sounds to me like you got hacked! If it rebooted and you had a keyboard and monitor connected to it and it came up correctly, but you can't login, either someone changes your ssh login, *or* you have a volume failing and the area of the drive where the executable for sshd is located is bad. One option you could try is to boot with keyboard/monitor and you'd have to go see how centos does it, but there is a way to boot to single user mode. If you get there and you can't login, someone changed the root password. I hope you didn't have telnet access enabled, and I hope you changed the ssh port number... If not, there were 2 ways someone could have gotten to your computer... Sorry for the challenges, but it's either a drive issue or a hacker, only 2 things if it was working and now it's not and you can't login. Alan -----Original Message----- From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Matt Roberts Sent: Monday, June 18, 2012 11:32 AM To: app_rpt-users at ohnosec.org Subject: [App_rpt-users] Major Allstar Issue Saturday morning I discovered I was having problems with my Allstar box. I wanted to control my node from the CLI, so logged in. My goal was to connect to Echolink, but my commands weren't working. The repeater would not key! I tried to reboot the computer but to a message telling me the command didn't exist. I tried using shutdown, but got no result either. I thought maybe the thing to do is reboot the computer from the power switch. I did that, and could not log-in remotely. The message I got was "access denied try later." Later, I remember when my micro node won't boot, you connect a keyboard to it, and hit F1. I shutdown the computer from the power switch again, and performed this action. The repeater is working, but when I try to connect remotely, I get "connection refused." I didn't change the port for SSH. Also, all three of my nodes have disappeared from the database. When you bring up the system wide node list, nodes 28142, 28143, and 28504 indicate they've been removed from the database. I never requested that! The 28142 node is my repeater, 28143 is my remote base, and 28504 was originally going to be used for a hub, but I've decided to make it a RTCM node. This will take a while, because I need to gather the funds for the equipment. I have an ISO image on my PC, but am not sure how to make it into a bootable CD. Matt Roberts n9gmr at me.com Call Sign N9GMR IRLP 4515 EchoLink 640860 Allstar 28142 _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users From kp4tr.ramon at gmail.com Mon Jun 18 15:47:45 2012 From: kp4tr.ramon at gmail.com (KP4TR (Ramon Gonzalez)) Date: Mon, 18 Jun 2012 11:47:45 -0400 Subject: [App_rpt-users] Major Allstar Issue In-Reply-To: <1034706A-F954-4794-ADE3-E2BBE7D6DCB9@me.com> References: <1034706A-F954-4794-ADE3-E2BBE7D6DCB9@me.com> Message-ID: <811FDB4E-A631-415E-9A92-2E94527ECD46@gmail.com> Did you change default root password? Sounds as if your server was hacked. A restore of the /etc/asterisk folder should do it. Sent from my iPhone On Jun 18, 2012, at 11:31 AM, Matt Roberts wrote: > Saturday morning I discovered I was having problems with my Allstar box. I wanted to control my node from the CLI, so logged in. My goal was to connect to Echolink, but my commands weren't working. The repeater would not key! I tried to reboot the computer but to a message telling me the command didn't exist. I tried using shutdown, but got no result either. I thought maybe the thing to do is reboot the computer from the power switch. I did that, and could not log-in remotely. The message I got was "access denied try later." Later, I remember when my micro node won't boot, you connect a keyboard to it, and hit F1. I shutdown the computer from the power switch again, and performed this action. The repeater is working, but when I try to connect remotely, I get "connection refused." I didn't change the port for SSH. > Also, all three of my nodes have disappeared from the database. When you bring up the system wide node list, nodes 28142, 28143, and 28504 indicate they've been removed from the database. I never requested that! The 28142 node is my repeater, 28143 is my remote base, and 28504 was originally going to be used for a hub, but I've decided to make it a RTCM node. This will take a while, because I need to gather the funds for the equipment. > I have an ISO image on my PC, but am not sure how to make it into a bootable CD. > > > Matt Roberts > n9gmr at me.com > Call Sign N9GMR > IRLP 4515 > EchoLink 640860 > Allstar 28142 > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users From petem001 at hotmail.com Mon Jun 18 15:53:14 2012 From: petem001 at hotmail.com (pete M) Date: Mon, 18 Jun 2012 11:53:14 -0400 Subject: [App_rpt-users] Allstar and echolink Message-ID: I have a small question If I have a net and my repeater is connected to some node on echolink and some user on allstar. Will both user type will ear each other? Let me explain my setup I want to do. First I have 2 repeater connected to a rc-210 constroler (one Vhf , one UHF) on port 1 and 2 I want to connect my allstar computer to port 3 and connect it to port 1 and 2 during the net. Right now I only have a Link to echolink by UHF and all the delay that add up is very annoying. And I want to use Allstar to connect some remote user and repeater to our network. I will use a Thin Client with a URI as the allstar computer) Pierre VE2PF -------------- next part -------------- An HTML attachment was scrubbed... URL: From k1lnx at k1lnx.net Mon Jun 18 16:00:33 2012 From: k1lnx at k1lnx.net (Stephen - K1LNX) Date: Mon, 18 Jun 2012 16:00:33 +0000 Subject: [App_rpt-users] Portable micro-node? In-Reply-To: <8035B62A7B044D4B81015D5C49D1627D7EDF33@webmail.esquared.net> References: , <8035B62A7B044D4B81015D5C49D1627D7EDF33@webmail.esquared.net> Message-ID: I've thought about using the same radio, I have an MT2000 and an MTS2000 both VHF that would be perfect for a project like this... I also found these on ebay, might be easier for wiring: http://www.ebay.com/itm/KAWAMALL-Audio-Adapter-Motorola-Radio-HT-1000-MTS-2000-XTS-2500-Headset-Port-/380445305999?pt=LH_DefaultDomain_0&hash=item58944eac8f#ht_3174wt_1139 I don't have a RTCM yet, but plan to get one in the near future. Stephen K1LNX ________________________________ From: app_rpt-users-bounces at ohnosec.org [app_rpt-users-bounces at ohnosec.org] on behalf of Peter Elke [pete.elke at esquared.com] Sent: Monday, June 18, 2012 1:26 AM To: Alan Adamson; app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] Portable micro-node? Hi Alan, For UHF I have used Motorola HT1000, MT/MTS2000, and Astro Sabers with the RTCM (and Beagle/Lox), both work well other than that you have to use the speaker?s bias for COS detect. You just need to destroy a speaker/mic cable for the cause. Pete/wi6h From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Alan Adamson Sent: Sunday, June 17, 2012 1:18 PM To: app_rpt-users at ohnosec.org Subject: [App_rpt-users] Portable micro-node? Ok, so I want to build a portable micro-node for allstar around an RTCM. I have the RTCM know how to configure it, etc? What I just can't figure out is *what radio* to use?. I'd like this to be portable and low power - ala HT. I've got any number of commercial motorola HT's or a few dual band Ham HT's (specifically thinking the TH-79A that I have laying around)?. So what are you all using and what's easy to hook up? I really don't want another *mobile* radio, that's just too much overkill. If you would, can you offer hookup directions (not to the RTCM, I know that part), but to whatever radio you are using? Thanks in advance, Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From adamson_alan at hotmail.com Mon Jun 18 16:09:19 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Mon, 18 Jun 2012 12:09:19 -0400 Subject: [App_rpt-users] Portable micro-node? In-Reply-To: References: , <8035B62A7B044D4B81015D5C49D1627D7EDF33@webmail.esquared.net> Message-ID: My problem with all of this is the issues with Motorola (and other commercial radios as well) hookup. The speaker isn't a speaker and ground it's a floating set of two wires and they bias it with voltage, and the PTT and Mic interconnection aren't that obvious either, as you may need to put resistors and caps in line to filter and cause the radio to see the correct voltage so that the PTT enables. On the GP300's, I don't think you need that adapter as they have a 2 jack location already provided. I think what I'm going to try, just because I have one and all the parts is my TH-F6A, you can put it in 9600 baud packet mode and get to the discriminator and mod input directly, and it has COR (but alas, it's just connected to the meter, not really to a valid COR on CTCSS). but I also have a TS-32 laying around so I may make something really small. The radio is way over kill, but hey I have it and it's straight forward to connect up. Alan From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Stephen - K1LNX Sent: Monday, June 18, 2012 12:01 PM To: app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] Portable micro-node? I've thought about using the same radio, I have an MT2000 and an MTS2000 both VHF that would be perfect for a project like this... I also found these on ebay, might be easier for wiring: http://www.ebay.com/itm/KAWAMALL-Audio-Adapter-Motorola-Radio-HT-1000-MTS-20 00-XTS-2500-Headset-Port-/380445305999?pt=LH_DefaultDomain_0 &hash=item58944eac8f#ht_3174wt_1139 I don't have a RTCM yet, but plan to get one in the near future. Stephen K1LNX _____ From: app_rpt-users-bounces at ohnosec.org [app_rpt-users-bounces at ohnosec.org] on behalf of Peter Elke [pete.elke at esquared.com] Sent: Monday, June 18, 2012 1:26 AM To: Alan Adamson; app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] Portable micro-node? Hi Alan, For UHF I have used Motorola HT1000, MT/MTS2000, and Astro Sabers with the RTCM (and Beagle/Lox), both work well other than that you have to use the speaker's bias for COS detect. You just need to destroy a speaker/mic cable for the cause. Pete/wi6h From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Alan Adamson Sent: Sunday, June 17, 2012 1:18 PM To: app_rpt-users at ohnosec.org Subject: [App_rpt-users] Portable micro-node? Ok, so I want to build a portable micro-node for allstar around an RTCM. I have the RTCM know how to configure it, etc. What I just can't figure out is *what radio* to use.. I'd like this to be portable and low power - ala HT. I've got any number of commercial motorola HT's or a few dual band Ham HT's (specifically thinking the TH-79A that I have laying around).. So what are you all using and what's easy to hook up? I really don't want another *mobile* radio, that's just too much overkill. If you would, can you offer hookup directions (not to the RTCM, I know that part), but to whatever radio you are using? Thanks in advance, Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From kc9gqr at gmail.com Mon Jun 18 16:21:12 2012 From: kc9gqr at gmail.com (Bradley Haney) Date: Mon, 18 Jun 2012 11:21:12 -0500 Subject: [App_rpt-users] xipar and echolink... Message-ID: Hello all .. got a simplex node rolling on 28295 using the xipar flavor.. I put everything into the echolink.conf and try to connect to echotest or anyone it just says connection fail.. I have ports 5198-5200 open to my ip address.. When i do try to connect to an echolink station it does repeat back the node call sign so i know i connected to the database but seems something isn't right.. for servers i am using naeast.echolink.org nawest.echolink.org backup.echolink.org... this one always fails.. Any thoughts.. echolink node is under kc9gqr-L Thanks BRadley From k1lnx at k1lnx.net Mon Jun 18 16:30:44 2012 From: k1lnx at k1lnx.net (Stephen - K1LNX) Date: Mon, 18 Jun 2012 16:30:44 +0000 Subject: [App_rpt-users] Portable micro-node? In-Reply-To: References: , <8035B62A7B044D4B81015D5C49D1627D7EDF33@webmail.esquared.net> Message-ID: <4FDF5839.7080702@k1lnx.net> That indeed does sound like it could end up being a pain... another thought I've given is one of the cheap chinese radios like the Baofeng, Puxing, or Wouxun. They can be bought on Ebay for around $50 single band. Would definitely like to get this done this summer.... Stephen K1LNX On 6/18/12 12:09 PM, Alan Adamson wrote: My problem with all of this is the issues with Motorola (and other commercial radios as well) hookup. The speaker isn't a speaker and ground it's a floating set of two wires and they bias it with voltage, and the PTT and Mic interconnection aren't that obvious either, as you may need to put resistors and caps in line to filter and cause the radio to see the correct voltage so that the PTT enables. On the GP300's, I don't think you need that adapter as they have a 2 jack location already provided. I think what I'm going to try, just because I have one and all the parts is my TH-F6A, you can put it in 9600 baud packet mode and get to the discriminator and mod input directly, and it has COR (but alas, it's just connected to the meter, not really to a valid COR on CTCSS)? but I also have a TS-32 laying around so I may make something really small. The radio is way over kill, but hey I have it and it's straight forward to connect up. Alan From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Stephen - K1LNX Sent: Monday, June 18, 2012 12:01 PM To: app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] Portable micro-node? I've thought about using the same radio, I have an MT2000 and an MTS2000 both VHF that would be perfect for a project like this... I also found these on ebay, might be easier for wiring: http://www.ebay.com/itm/KAWAMALL-Audio-Adapter-Motorola-Radio-HT-1000-MTS-2000-XTS-2500-Headset-Port-/380445305999?pt=LH_DefaultDomain_0&hash=item58944eac8f#ht_3174wt_1139 I don't have a RTCM yet, but plan to get one in the near future. Stephen K1LNX ________________________________ From: app_rpt-users-bounces at ohnosec.org [app_rpt-users-bounces at ohnosec.org] on behalf of Peter Elke [pete.elke at esquared.com] Sent: Monday, June 18, 2012 1:26 AM To: Alan Adamson; app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] Portable micro-node? Hi Alan, For UHF I have used Motorola HT1000, MT/MTS2000, and Astro Sabers with the RTCM (and Beagle/Lox), both work well other than that you have to use the speaker?s bias for COS detect. You just need to destroy a speaker/mic cable for the cause. Pete/wi6h From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Alan Adamson Sent: Sunday, June 17, 2012 1:18 PM To: app_rpt-users at ohnosec.org Subject: [App_rpt-users] Portable micro-node? Ok, so I want to build a portable micro-node for allstar around an RTCM. I have the RTCM know how to configure it, etc? What I just can't figure out is *what radio* to use?. I'd like this to be portable and low power - ala HT. I've got any number of commercial motorola HT's or a few dual band Ham HT's (specifically thinking the TH-79A that I have laying around)?. So what are you all using and what's easy to hook up? I really don't want another *mobile* radio, that's just too much overkill. If you would, can you offer hookup directions (not to the RTCM, I know that part), but to whatever radio you are using? Thanks in advance, Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From bdboyle at bdboyle.com Mon Jun 18 16:46:51 2012 From: bdboyle at bdboyle.com (Bryan D. Boyle) Date: Mon, 18 Jun 2012 12:46:51 -0400 Subject: [App_rpt-users] Portable micro-node? In-Reply-To: References: , <8035B62A7B044D4B81015D5C49D1627D7EDF33@webmail.esquared.net> Message-ID: <4FDF5B7B.3000604@bdboyle.com> On 6/18/12 12:09 PM, Alan Adamson wrote: > My problem with all of this is the issues with Motorola (and other > commercial radios as well) hookup. Depends on the radio. Maxtracs (16 pin), GTXs, Spectras are so simple to interface that it's almost a non-issue. All the signals are on the back...discriminator audio out, audio in, ptt, and ground. And, unlike most if not all ham-grade equipment, are can handle the rigors of constant duty cycle rather than the ICAS rated ham equipment. > > The speaker isn't a speaker and ground it's a floating set of two wires and > they bias it with voltage, and the PTT and Mic interconnection aren't that > obvious either, as you may need to put resistors and caps in line to filter > and cause the radio to see the correct voltage so that the PTT enables. Audio floats above ground in a balanced system so as to minimize common mode interference. On the radios I've worked on, especially Batwings, I've noticed no bias voltages on speaker leads. Besides, you really should not be using speaker audio to drive a URI anyway. Find the discriminator output, and use that. Friends don't let friends use VOX on asterisk; it makes it simple to interface, because, in the end, you only need 3 leads plus a ground to get the thing to work if you use the DSP processing to derive your COS and PL decode. You may, and I say may, depending on how you send audio back in (flat vs mic), have to use a 47 puff in the mic line IF there is bias voltage on it for a condensor mic. Otherwise, put a pull up on to the PTT pin, and ground it for PTT. The URI can handle push to 5v or pull to ground as the signal for PTT; it's looking for the voltage transition to determine (as best I can tell) whether or not it's a valid state change and act accordingly. Heck, I even have some dry contacts on a broadcast studio audio console muting relay that can properly signal a URI to turn on the cluster transmitters. It's not hard, nor complicated, if you're using the right equipment. > > On the GP300's, I don't think you need that adapter as they have a 2 jack > location already provided. > > I think what I'm going to try, just because I have one and all the parts is > my TH-F6A, you can put it in 9600 baud packet mode and get to the > discriminator and mod input directly, and it has COR (but alas, it's just > connected to the meter, not really to a valid COR on CTCSS). but I also have > a TS-32 laying around so I may make something really small. The radio is > way over kill, but hey I have it and it's straight forward to connect up. > If you have a discriminator output, you don't need to have a hardware COS. That's what the DSP is for, as well as CTCSS decoding. A lot easier to interface. -- Bryan In this world, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant. You may quote me. Sent from my MacBook Pro. -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/pkcs7-signature Size: 4916 bytes Desc: S/MIME Cryptographic Signature URL: From bdboyle at bdboyle.com Mon Jun 18 16:49:27 2012 From: bdboyle at bdboyle.com (Bryan D. Boyle) Date: Mon, 18 Jun 2012 12:49:27 -0400 Subject: [App_rpt-users] xipar and echolink... In-Reply-To: References: Message-ID: <4FDF5C17.9080009@bdboyle.com> On 6/18/12 12:21 PM, Bradley Haney wrote: > Hello all .. got a simplex node rolling on 28295 using the xipar > flavor.. I put everything into the echolink.conf and try to > connect to echotest or anyone it just says connection fail.. I have > ports 5198-5200 open to my ip address.. When i do try to connect to > an echolink station it does repeat back the node call sign so i know i > connected to the database but seems something isn't right.. You have to wait (some amount) of time for asterisk to download the list of authenticated end-points. It's not instantaneous when you start the client if you're trying to go direct from the client to the node. So, configure your node to use a well-known proxy, and you should go right in. Otherwise, wait 5 minutes after starting your client and authenticating to the echolink auth server. Asterisk will pick up the new list and then let you in. -- Bryan In this world, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant. You may quote me. Sent from my MacBook Pro. -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/pkcs7-signature Size: 4916 bytes Desc: S/MIME Cryptographic Signature URL: From ke2n at cs.com Mon Jun 18 17:09:25 2012 From: ke2n at cs.com (Ken) Date: Mon, 18 Jun 2012 13:09:25 -0400 (EDT) Subject: [App_rpt-users] Major Allstar Issue In-Reply-To: <1034706A-F954-4794-ADE3-E2BBE7D6DCB9@me.com> References: <1034706A-F954-4794-ADE3-E2BBE7D6DCB9@me.com> Message-ID: <8CF1B8C3FA43414-FF4-D9EA@webmail-m059.sysops.aol.com> Matt - if you need to make the ISO disk, you have to use some software that offers the "burn ISO" option or similar words. If your computer does not already have it, you can find something on the internet something like this http://www.ntfs.com/iso-burning.htm http://www.cdburnerxp.se/help/Data/burn-iso be careful to virus-scan anything you download from the internet, of course .... GL Ken -----Original Message----- From: Matt Roberts To: app_rpt-users Sent: Mon, Jun 18, 2012 11:31 am Subject: [App_rpt-users] Major Allstar Issue I have an ISO image on my PC, but am not sure how to make it into a bootable CD. Matt Roberts 9gmr at me.com all Sign N9GMR RLP 4515 choLink 640860 llstar 28142 _______________________________________________ pp_rpt-users mailing list pp_rpt-users at ohnosec.org ttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From nessenj at jimsoffice.org Mon Jun 18 17:53:41 2012 From: nessenj at jimsoffice.org (James Nessen) Date: Mon, 18 Jun 2012 10:53:41 -0700 Subject: [App_rpt-users] Major Allstar Issue In-Reply-To: <1034706A-F954-4794-ADE3-E2BBE7D6DCB9@me.com> References: <1034706A-F954-4794-ADE3-E2BBE7D6DCB9@me.com> Message-ID: If you attempt to look at your nodes through stats.allstarlink.org and they aren't online, you will get the error message "Node XXXXX is no longer in the database", don't panic because all this means is that since your nodes aren't online they aren't reporting to the stats server (and don't get a record in the reporting database). Once your issue gets resolved and your nodes are back online, they will automatically re-appear on the page and life will be good again. 73 Jim, K6JWN On Mon, Jun 18, 2012 at 8:31 AM, Matt Roberts wrote: > > Saturday morning I discovered I was having problems with my Allstar box. ?I wanted to control my node from the CLI, so logged in. ?My goal was to connect to Echolink, but my commands weren't working. ?The repeater would not key! I tried to reboot the computer but to a message telling me the command didn't exist. ?I tried using shutdown, but got no result either. ?I thought maybe the thing to do is reboot the computer from the power switch. ?I did that, and could not log-in remotely. ?The message I got was "access denied try later." Later, I remember when my micro node won't boot, you connect a keyboard to it, and hit F1. ?I shutdown the computer from the power switch again, and performed this action. ?The repeater is working, but when I try to connect remotely, I get "connection refused." I didn't change the port for SSH. > Also, all three of my nodes have disappeared from the database. ?When you bring up the system wide node list, nodes 28142, 28143, and 28504 indicate they've been removed from the database. ?I never requested that! The 28142 node is my repeater, 28143 is my remote base, and 28504 was originally going to be used for a hub, but I've decided to make it a RTCM node. ?This will take a while, because I need to gather the funds for the equipment. > I have an ISO image on my PC, but am not sure how to make it into a bootable CD. > > > Matt Roberts > n9gmr at me.com > Call Sign N9GMR > IRLP 4515 > EchoLink 640860 > Allstar 28142 > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users From tim.sawyer at me.com Mon Jun 18 18:17:13 2012 From: tim.sawyer at me.com (Tim Sawyer) Date: Mon, 18 Jun 2012 11:17:13 -0700 Subject: [App_rpt-users] Allstar and echolink In-Reply-To: References: Message-ID: <55C6F989-6E80-4097-A4B0-8D367BF9E382@me.com> Yes, your allstar node will let any connected nodes, be they echolink or allstar, will hear and talk to all connected nodes. Also, you could ditch the rc-210 and let Allstar (and 2 URIs or 2 RTCMs) do it all. You'll find your TT command structure much less complicated that way. -- Tim :wq On Jun 18, 2012, at 8:53 AM, pete M wrote: > I have a small question > > If I have a net and my repeater is connected to some node on echolink and some user on allstar. Will both user type will ear each other? > > Let me explain my setup I want to do. > > First I have 2 repeater connected to a rc-210 constroler (one Vhf , one UHF) on port 1 and 2 > > I want to connect my allstar computer to port 3 and connect it to port 1 and 2 during the net. > > Right now I only have a Link to echolink by UHF and all the delay that add up is very annoying. And I want to use Allstar to connect some remote user and repeater to our network. > > I will use a Thin Client with a URI as the allstar computer) > > Pierre > VE2PF > > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From pete.elke at esquared.com Mon Jun 18 18:46:09 2012 From: pete.elke at esquared.com (Peter Elke) Date: Mon, 18 Jun 2012 18:46:09 -0000 Subject: [App_rpt-users] Portable micro-node? In-Reply-To: References: , <8035B62A7B044D4B81015D5C49D1627D7EDF33@webmail.esquared.net> Message-ID: <8035B62A7B044D4B81015D5C49D1627D7EDF3C@webmail.esquared.net> Not that tough, three or four resisters and a speaker-mic cable for COS and rx audio. PTT is a ground to TX. From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Alan Adamson Sent: Monday, June 18, 2012 12:09 PM To: 'Stephen - K1LNX'; app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] Portable micro-node? My problem with all of this is the issues with Motorola (and other commercial radios as well) hookup. The speaker isn't a speaker and ground it's a floating set of two wires and they bias it with voltage, and the PTT and Mic interconnection aren't that obvious either, as you may need to put resistors and caps in line to filter and cause the radio to see the correct voltage so that the PTT enables. On the GP300's, I don't think you need that adapter as they have a 2 jack location already provided. I think what I'm going to try, just because I have one and all the parts is my TH-F6A, you can put it in 9600 baud packet mode and get to the discriminator and mod input directly, and it has COR (but alas, it's just connected to the meter, not really to a valid COR on CTCSS)... but I also have a TS-32 laying around so I may make something really small. The radio is way over kill, but hey I have it and it's straight forward to connect up. Alan From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Stephen - K1LNX Sent: Monday, June 18, 2012 12:01 PM To: app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] Portable micro-node? I've thought about using the same radio, I have an MT2000 and an MTS2000 both VHF that would be perfect for a project like this... I also found these on ebay, might be easier for wiring: http://www.ebay.com/itm/KAWAMALL-Audio-Adapter-Motorola-Radio-HT-1000-MT S-2000-XTS-2500-Headset-Port-/380445305999?pt=LH_DefaultDomain_0&hash=it em58944eac8f#ht_3174wt_1139 I don't have a RTCM yet, but plan to get one in the near future. Stephen K1LNX ________________________________ From: app_rpt-users-bounces at ohnosec.org [app_rpt-users-bounces at ohnosec.org] on behalf of Peter Elke [pete.elke at esquared.com] Sent: Monday, June 18, 2012 1:26 AM To: Alan Adamson; app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] Portable micro-node? Hi Alan, For UHF I have used Motorola HT1000, MT/MTS2000, and Astro Sabers with the RTCM (and Beagle/Lox), both work well other than that you have to use the speaker's bias for COS detect. You just need to destroy a speaker/mic cable for the cause. Pete/wi6h From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Alan Adamson Sent: Sunday, June 17, 2012 1:18 PM To: app_rpt-users at ohnosec.org Subject: [App_rpt-users] Portable micro-node? Ok, so I want to build a portable micro-node for allstar around an RTCM. I have the RTCM know how to configure it, etc... What I just can't figure out is *what radio* to use.... I'd like this to be portable and low power - ala HT. I've got any number of commercial motorola HT's or a few dual band Ham HT's (specifically thinking the TH-79A that I have laying around).... So what are you all using and what's easy to hook up? I really don't want another *mobile* radio, that's just too much overkill. If you would, can you offer hookup directions (not to the RTCM, I know that part), but to whatever radio you are using? Thanks in advance, Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From w7ry at centurytel.net Mon Jun 18 18:49:35 2012 From: w7ry at centurytel.net (Jim W7RY) Date: Mon, 18 Jun 2012 11:49:35 -0700 Subject: [App_rpt-users] xipar and echolink... In-Reply-To: <4FDF5C17.9080009@bdboyle.com> References: <4FDF5C17.9080009@bdboyle.com> Message-ID: <6A4A3AA039714A8E9A510E693F55A49D@JimsLaptop> Brian... Is there a reason that you respond with attachments? A pain to read with a smartphone. 73 Jim W7RY -----Original Message----- From: Bryan D. Boyle Sent: Monday, June 18, 2012 9:49 AM To: app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] xipar and echolink... _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users From w7ry at centurytel.net Mon Jun 18 19:03:28 2012 From: w7ry at centurytel.net (Jim W7RY) Date: Mon, 18 Jun 2012 12:03:28 -0700 Subject: [App_rpt-users] RTCM CTCSS Output Tone Message-ID: Just received my RTCM! Whoo Hoo! Have a question though. The PL tone output is also the transmit audio output. With my USB fob, I used both channels of the TX out, one for PL and one for audio. This worked perfectly for a Motorola Mitrek. Now I will be using a GP300 or P110 for a transmitter and would really like to separate the PL tone output from the audio output. What have others done? Will a 16 pin GM300 take PL into the microphone input? Or are you running the RTCM transmit audio into the flat audio input of the radio? Does the radio provide deviation limiting with this setup? I don?t think it does. Thanks! 73 Jim W7RY -------------- next part -------------- An HTML attachment was scrubbed... URL: From jeff.carrier at rmsmsecurity.com Mon Jun 18 19:09:18 2012 From: jeff.carrier at rmsmsecurity.com (Jeffrey S. Carrier) Date: Mon, 18 Jun 2012 13:09:18 -0600 Subject: [App_rpt-users] Allstar and echolink In-Reply-To: <55C6F989-6E80-4097-A4B0-8D367BF9E382@me.com> References: <55C6F989-6E80-4097-A4B0-8D367BF9E382@me.com> Message-ID: <9E97761DFD3ED7488C4F6D0C2BC286C616C8E5@Security-5.plantprotection.ad> Pierre, I have the exact same setup. You should have no issues but you'll have to run allstar half duplex. I tried FDX on the RC210 and the ASL node with pretty funky results. You could just replace the RC210 and let the ASL server do all the work. As soon as I can get to my site that's what I'll be doing and the RC210 will be on ebay (I hate it). 73 de K0JSC ________________________________ From: Tim Sawyer [mailto:tim.sawyer at me.com] Sent: Monday, June 18, 2012 12:17 PM To: pete M Cc: APP RPT Subject: Re: [App_rpt-users] Allstar and echolink Yes, your allstar node will let any connected nodes, be they echolink or allstar, will hear and talk to all connected nodes. Also, you could ditch the rc-210 and let Allstar (and 2 URIs or 2 RTCMs) do it all. You'll find your TT command structure much less complicated that way. -- Tim :wq On Jun 18, 2012, at 8:53 AM, pete M wrote: I have a small question If I have a net and my repeater is connected to some node on echolink and some user on allstar. Will both user type will ear each other? Let me explain my setup I want to do. First I have 2 repeater connected to a rc-210 constroler (one Vhf , one UHF) on port 1 and 2 I want to connect my allstar computer to port 3 and connect it to port 1 and 2 during the net. Right now I only have a Link to echolink by UHF and all the delay that add up is very annoying. And I want to use Allstar to connect some remote user and repeater to our network. I will use a Thin Client with a URI as the allstar computer) Pierre VE2PF _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From w7ry at centurytel.net Mon Jun 18 19:20:10 2012 From: w7ry at centurytel.net (Jim W7RY) Date: Mon, 18 Jun 2012 12:20:10 -0700 Subject: [App_rpt-users] RTCM CTCSS Output Tone In-Reply-To: References: Message-ID: Alan... You miss understand... I WANT the RTCM to generate my PL so I can use chicken burst on my non Motorola branded radios. I DON?T like squelch bursts ! As for your COS issue... Don?t use COS. Let the RTCM handle it. Just put discriminator audio into the RTCM. Also let the RTCM decode your PL tone too. It it?s as good as the URI, you have no worries! My plan is to us a pair of GP-300s (P110s) to make a repeater using the RTCM as a repeater controller. 73 Jim W7RY From: Alan Adamson Sent: Monday, June 18, 2012 12:07 PM To: 'Jim W7RY' Subject: RE: [App_rpt-users] RTCM CTCSS Output Tone Jim, when you get done, you have *got* to share :)? Can't you just program the GP300 to TX with the PL tone and not worry about the PL from the RTCM? Is the issue that you are not going into the modulator, you are going into the mic input, so the PL gets whacked or distorted? I run an RTCM on my repeater, but I let the repeater TX do the PL encode, I just put audio into it from the RTCM Alan From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Jim W7RY Sent: Monday, June 18, 2012 3:03 PM To: app_rpt-users at ohnosec.org Subject: [App_rpt-users] RTCM CTCSS Output Tone Just received my RTCM! Whoo Hoo! Have a question though. The PL tone output is also the transmit audio output. With my USB fob, I used both channels of the TX out, one for PL and one for audio. This worked perfectly for a Motorola Mitrek. Now I will be using a GP300 or P110 for a transmitter and would really like to separate the PL tone output from the audio output. What have others done? Will a 16 pin GM300 take PL into the microphone input? Or are you running the RTCM transmit audio into the flat audio input of the radio? Does the radio provide deviation limiting with this setup? I don?t think it does. Thanks! 73 Jim W7RY -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: wlEmoticon-smile[1].png Type: image/png Size: 1041 bytes Desc: not available URL: From adamson_alan at hotmail.com Mon Jun 18 19:34:36 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Mon, 18 Jun 2012 15:34:36 -0400 Subject: [App_rpt-users] RTCM CTCSS Output Tone In-Reply-To: <016601cd4d87$ee13c850$ca3b58f0$@centurytel.net> References: <016601cd4d87$ee13c850$ca3b58f0$@centurytel.net> Message-ID: I sent this direct and then realized maybe I'd get educated if I sent it to the list. I didn't think the RTCM did CTCSS *decode*, the instructions suggest that it does squelch, but the setup there says to set it high so it doesn't false, to get CTCSS, you would need to get it externally and attach it to the CTCSS pin? Or am I missing something? I can't find any settings for the voter.conf or the RTCM setup to tell it which PL to decode for example? So I'm thinking it goes not do decode?. Allstar however does to encode if applying the audio to the modulator directly? Alan From: Jim W7RY [mailto:w7ry at centurytel.net] Sent: Monday, June 18, 2012 3:20 PM To: Alan Adamson Cc: app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] RTCM CTCSS Output Tone Alan... You miss understand... I WANT the RTCM to generate my PL so I can use chicken burst on my non Motorola branded radios. I DON?T like squelch bursts Smile! As for your COS issue... Don?t use COS. Let the RTCM handle it. Just put discriminator audio into the RTCM. Also let the RTCM decode your PL tone too. It it?s as good as the URI, you have no worries! My plan is to us a pair of GP-300s (P110s) to make a repeater using the RTCM as a repeater controller. 73 Jim W7RY From: Alan Adamson Sent: Monday, June 18, 2012 12:07 PM To: 'Jim W7RY' Subject: RE: [App_rpt-users] RTCM CTCSS Output Tone Jim, when you get done, you have *got* to share :)? Can't you just program the GP300 to TX with the PL tone and not worry about the PL from the RTCM? Is the issue that you are not going into the modulator, you are going into the mic input, so the PL gets whacked or distorted? I run an RTCM on my repeater, but I let the repeater TX do the PL encode, I just put audio into it from the RTCM Alan From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Jim W7RY Sent: Monday, June 18, 2012 3:03 PM To: app_rpt-users at ohnosec.org Subject: [App_rpt-users] RTCM CTCSS Output Tone Just received my RTCM! Whoo Hoo! Have a question though. The PL tone output is also the transmit audio output. With my USB fob, I used both channels of the TX out, one for PL and one for audio. This worked perfectly for a Motorola Mitrek. Now I will be using a GP300 or P110 for a transmitter and would really like to separate the PL tone output from the audio output. What have others done? Will a 16 pin GM300 take PL into the microphone input? Or are you running the RTCM transmit audio into the flat audio input of the radio? Does the radio provide deviation limiting with this setup? I don?t think it does. Thanks! 73 Jim W7RY -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.png Type: image/png Size: 1041 bytes Desc: not available URL: From pete.elke at esquared.com Mon Jun 18 20:00:35 2012 From: pete.elke at esquared.com (Peter Elke) Date: Mon, 18 Jun 2012 20:00:35 -0000 Subject: [App_rpt-users] RTCM CTCSS Output Tone In-Reply-To: References: <016601cd4d87$ee13c850$ca3b58f0$@centurytel.net> Message-ID: <8035B62A7B044D4B81015D5C49D1627D7EDF40@webmail.esquared.net> Hi Alan, The radio will need to decode the PL on an RTCM. It has two logic inputs COS and CTCSS. There is not software decode. There is an encoder for local repeat if the IP link dies. Pete From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Alan Adamson Sent: Monday, June 18, 2012 3:35 PM To: 'Jim W7RY' Cc: app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] RTCM CTCSS Output Tone I sent this direct and then realized maybe I'd get educated if I sent it to the list. I didn't think the RTCM did CTCSS *decode*, the instructions suggest that it does squelch, but the setup there says to set it high so it doesn't false, to get CTCSS, you would need to get it externally and attach it to the CTCSS pin? Or am I missing something? I can't find any settings for the voter.conf or the RTCM setup to tell it which PL to decode for example? So I'm thinking it goes not do decode?. Allstar however does to encode if applying the audio to the modulator directly? Alan From: Jim W7RY [mailto:w7ry at centurytel.net] Sent: Monday, June 18, 2012 3:20 PM To: Alan Adamson Cc: app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] RTCM CTCSS Output Tone Alan... You miss understand... I WANT the RTCM to generate my PL so I can use chicken burst on my non Motorola branded radios. I DON?T like squelch bursts ! As for your COS issue... Don?t use COS. Let the RTCM handle it. Just put discriminator audio into the RTCM. Also let the RTCM decode your PL tone too. It it?s as good as the URI, you have no worries! My plan is to us a pair of GP-300s (P110s) to make a repeater using the RTCM as a repeater controller. 73 Jim W7RY From: Alan Adamson Sent: Monday, June 18, 2012 12:07 PM To: 'Jim W7RY' Subject: RE: [App_rpt-users] RTCM CTCSS Output Tone Jim, when you get done, you have *got* to share :)? Can't you just program the GP300 to TX with the PL tone and not worry about the PL from the RTCM? Is the issue that you are not going into the modulator, you are going into the mic input, so the PL gets whacked or distorted? I run an RTCM on my repeater, but I let the repeater TX do the PL encode, I just put audio into it from the RTCM Alan From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Jim W7RY Sent: Monday, June 18, 2012 3:03 PM To: app_rpt-users at ohnosec.org Subject: [App_rpt-users] RTCM CTCSS Output Tone Just received my RTCM! Whoo Hoo! Have a question though. The PL tone output is also the transmit audio output. With my USB fob, I used both channels of the TX out, one for PL and one for audio. This worked perfectly for a Motorola Mitrek. Now I will be using a GP300 or P110 for a transmitter and would really like to separate the PL tone output from the audio output. What have others done? Will a 16 pin GM300 take PL into the microphone input? Or are you running the RTCM transmit audio into the flat audio input of the radio? Does the radio provide deviation limiting with this setup? I don?t think it does. Thanks! 73 Jim W7RY -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.png Type: image/png Size: 1041 bytes Desc: image001.png URL: From n9gmr at me.com Mon Jun 18 20:23:56 2012 From: n9gmr at me.com (Matt Roberts) Date: Mon, 18 Jun 2012 16:23:56 -0400 Subject: [App_rpt-users] xipar and echolink... In-Reply-To: References: Message-ID: You need to forward 5199 as well. Matt Roberts n9gmr at me.com Sent from my iPhone On Jun 18, 2012, at 12:21 PM, Bradley Haney wrote: > Hello all .. got a simplex node rolling on 28295 using the xipar > flavor.. I put everything into the echolink.conf and try to > connect to echotest or anyone it just says connection fail.. I have > ports 5198-5200 open to my ip address.. When i do try to connect to > an echolink station it does repeat back the node call sign so i know i > connected to the database but seems something isn't right.. > > for servers i am using > naeast.echolink.org > nawest.echolink.org > backup.echolink.org... this one always fails.. > > Any thoughts.. echolink node is under kc9gqr-L > > Thanks BRadley > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users From kb2ear at kb2ear.net Mon Jun 18 21:04:30 2012 From: kb2ear at kb2ear.net (Scott Weis) Date: Mon, 18 Jun 2012 17:04:30 -0400 Subject: [App_rpt-users] xipar and echolink... In-Reply-To: References: Message-ID: <006901cd4d95$f44a7a80$dcdf6f80$@kb2ear.net> Make sure you have 5198 and 5199 UDP forwarded. You may have TCP -----Original Message----- From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Bradley Haney Sent: Monday, June 18, 2012 12:21 PM To: app_rpt-users at ohnosec.org Subject: [App_rpt-users] xipar and echolink... Hello all .. got a simplex node rolling on 28295 using the xipar flavor.. I put everything into the echolink.conf and try to connect to echotest or anyone it just says connection fail.. I have ports 5198-5200 open to my ip address.. When i do try to connect to an echolink station it does repeat back the node call sign so i know i connected to the database but seems something isn't right.. for servers i am using naeast.echolink.org nawest.echolink.org backup.echolink.org... this one always fails.. Any thoughts.. echolink node is under kc9gqr-L Thanks BRadley _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users From telesistant at hotmail.com Tue Jun 19 01:08:06 2012 From: telesistant at hotmail.com (Jim Duuuude) Date: Mon, 18 Jun 2012 18:08:06 -0700 Subject: [App_rpt-users] RTCM CTCSS Output Tone In-Reply-To: References: Message-ID: Sorry if this information is redundant, but I havent had time to follow all the messages here.. The channel driver (chan_voter) in Asterisk is what generates the CTCSS tone for an RTCM (or Voter board), if you use the option to feed your transmitter flat audio. Jim From: w7ry at centurytel.net To: app_rpt-users at ohnosec.org Date: Mon, 18 Jun 2012 12:03:28 -0700 Subject: [App_rpt-users] RTCM CTCSS Output Tone Just received my RTCM! Whoo Hoo! Have a question though. The PL tone output is also the transmit audio output. With my USB fob, I used both channels of the TX out, one for PL and one for audio. This worked perfectly for a Motorola Mitrek. Now I will be using a GP300 or P110 for a transmitter and would really like to separate the PL tone output from the audio output. What have others done? Will a 16 pin GM300 take PL into the microphone input? Or are you running the RTCM transmit audio into the flat audio input of the radio? Does the radio provide deviation limiting with this setup? I don?t think it does. Thanks! 73 Jim W7RY _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From jpsingh at tataadvancedsystems.com Tue Jun 19 11:52:00 2012 From: jpsingh at tataadvancedsystems.com (Jay Prakash Singh) Date: Tue, 19 Jun 2012 17:22:00 +0530 Subject: [App_rpt-users] App_rpt-users Digest, Vol 40, Issue 38 In-Reply-To: References: Message-ID: Hello All, I am trying to make a call from Radio to a IP Phone registered to Asterisk. It includes DTMF detection, number verification and call establishment. Asterisk is unable to decode the DTMF and make a call. Regards Jay -----Original Message----- From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of app_rpt-users-request at ohnosec.org Sent: 15 June 2012 10:56 To: app_rpt-users at ohnosec.org Subject: App_rpt-users Digest, Vol 40, Issue 38 Send App_rpt-users mailing list submissions to app_rpt-users at ohnosec.org To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request at ohnosec.org You can reach the person managing the list at app_rpt-users-owner at ohnosec.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." Today's Topics: 1. allstarlink.org Registration (Tony Olivero) 2. Consensus on the DTMF falsing (Alan Adamson) 3. Good Laugh (Alan Adamson) 4. Re: allstarlink.org Registration ((KP4TR)Ramon Gonzalez) 5. Re: allstarlink.org Registration (Jim Duuuude) 6. Setting up a Pico node with Pickle (Eric Moeller) ---------------------------------------------------------------------- Message: 1 Date: Thu, 14 Jun 2012 15:42:53 -0500 From: "Tony Olivero" To: Subject: [App_rpt-users] allstarlink.org Registration Message-ID: <01ec01cd4a6e$463b1eb0$d2b15c10$@olivero.us> Content-Type: text/plain; charset="us-ascii" Hello: I have submitted a registration request to allstarlink.org, but never received confirmation instructions or a response to an e-mail I sent to a contact address listed on the website. Does anyone know how to get in touch with someone to either have those instructions re sent or to change my e-mail address that was used (there may have been a hang up with my League forwarding address). Thanks all for any help. Looking forward to experimenting with app_rpt. Tony AD9O -------------- next part -------------- An HTML attachment was scrubbed... URL: ------------------------------ Message: 2 Date: Thu, 14 Jun 2012 18:00:51 -0400 From: Alan Adamson To: Subject: [App_rpt-users] Consensus on the DTMF falsing Message-ID: Content-Type: text/plain; charset="us-ascii" So I two approaches offered to attempt a fix on the DTMF falsing. Which is the preferred? The build option or the config file option and would those that offered them offer them again please? Thanks, Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: ------------------------------ Message: 3 Date: Thu, 14 Jun 2012 18:09:01 -0400 From: Alan Adamson To: Subject: [App_rpt-users] Good Laugh Message-ID: Content-Type: text/plain; charset="us-ascii" An hour ago, I wouldn't have suggested the title, but the further I get away from it the more I just set back and laugh. Here's what happened. At about noon today I was talking to a friend on my repeater, it was linked to Allstar. I decided to switch to my simplex base. When I did I had this annoying giddie-up tick tick tick sounds. It sounded like packet lost, but was very rhythmic. I couldn't figure out where it was coming from. I checked the obvious, swapped cables, swapped URI's, tore down all the links, isolated just that one and used the iaxrpt client to see if I could start to take things out of the equation. I replaced the switch that everything was connected too. Still there. Next I rolled back recent svn changes thinking it must have been in one of those. Now the strange thing was that it was isolated to only one URI, and only the TX side of it. I confirmed that with Echolink, IRLP echo reflector, ever way I could think of. Now at this point, it was going on 2 hours of debug time. Next I started pulling out features I had enabled. All along trying to remember when I knew the last time was that it sounded good and what had changed. I even went to the effort rebuilding the ALSA drivers. Still the problem. I was at a loss. I was about to send a note asking if anyone else had ever seen this when I thought.. Hmm I wonder if it's the Transmitter. I pressed its PTT and the sound was there, so I pulled all the cables attached to it and did it again. Yep, still there. Powered it off and back on and everything was perfect again. Hooked everything back up, rolled all my changes back in, rebooted and poof it came right up, not issues whatsoever. Damn, just goes to show you. it's always the *simple* things.. But in this case it was the last thing I checked :(. So, 4hrs of debug, and it was as simple as resetting the TX. At some point, it had got into a strange state. You can bet I won't make the mistake again! Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: ------------------------------ Message: 4 Date: Thu, 14 Jun 2012 20:18:10 -0400 From: "(KP4TR)Ramon Gonzalez" To: Tony Olivero Cc: app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] allstarlink.org Registration Message-ID: <4FDA7F42.8090103 at gmail.com> Content-Type: text/plain; charset="iso-8859-1"; Format="flowed" Check your spam folder. I got a job offer a few months ago and it took 3 days to realize it was in my google spam! On 6/14/2012 4:42 PM, Tony Olivero wrote: > > Hello: > > I have submitted a registration request to allstarlink.org, but never > received confirmation instructions or a response to an e-mail I sent > to a contact address listed on the website. Does anyone know how to > get in touch with someone to either have those instructions re sent or > to change my e-mail address that was used (there may have been a hang > up with my League forwarding address). > > Thanks all for any help. Looking forward to experimenting with app_rpt. > > Tony AD9O > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: ------------------------------ Message: 5 Date: Thu, 14 Jun 2012 17:36:41 -0700 From: Jim Duuuude To: , Cc: app_rpt mailing list Subject: Re: [App_rpt-users] allstarlink.org Registration Message-ID: Content-Type: text/plain; charset="iso-8859-1" must not have been a very good job (if it got into your spam folder)... :-) Jim Date: Thu, 14 Jun 2012 20:18:10 -0400 From: kp4tr.ramon at gmail.com To: anthony at olivero.us CC: app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] allstarlink.org Registration Check your spam folder. I got a job offer a few months ago and it took 3 days to realize it was in my google spam! On 6/14/2012 4:42 PM, Tony Olivero wrote: Hello: I have submitted a registration request to allstarlink.org, but never received confirmation instructions or a response to an e-mail I sent to a contact address listed on the website. Does anyone know how to get in touch with someone to either have those instructions re sent or to change my e-mail address that was used (there may have been a hang up with my League forwarding address). Thanks all for any help. Looking forward to experimenting with app_rpt. Tony AD9O _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: ------------------------------ Message: 6 Date: Fri, 15 Jun 2012 00:26:11 -0500 From: Eric Moeller To: app_rpt-users at ohnosec.org Subject: [App_rpt-users] Setting up a Pico node with Pickle Message-ID: <4FDAC773.2050802 at sbcglobal.net> Content-Type: text/plain; charset=ISO-8859-1; format=flowed I have a Beagle Board with LOX and am trying to set it up but running into a brick wall. I've installed pickle on the SD card, booted the beagle up, logged in and configured the network setting but now what? I've configured a node using the ACID Linux and expected sorta the same thing with it asking me to enter my Allstarlink.org credentials and going from there but after setting up the network I'm just stuck with a command prompt. I've searched through this list server and spend a couple hours on Google but have not been able to find a "How-to" with setting up pickle. Can someone point me in the direction on what I need to do to set up pico/pickle. Eric Moeller N5FOG ------------------------------ _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users End of App_rpt-users Digest, Vol 40, Issue 38 ********************************************* From k1lnx at k1lnx.net Wed Jun 20 00:12:56 2012 From: k1lnx at k1lnx.net (Stephen - K1LNX) Date: Wed, 20 Jun 2012 00:12:56 +0000 Subject: [App_rpt-users] allstar-sys context Message-ID: <4FE1160E.2000708@k1lnx.net> I'm slowly bringing my Allstar node back online (hopefully it will work in ESXI, crossing fingers! So far so good) and I noticed a few new contexts in extensions.conf and iax.conf that wasn't there in the past. It looks like the allstar-public context is used for the web transceiver portal which I don't plan on using, but I don't quite understand the allstar-sys context. Has this changed from the past? I've always just used radio-secure which contains the following (don't think this is different from the default): extensions.conf: [radio-secure] exten => ${NODE},1,rpt,${NODE} And in my IAX.conf I just pass the incoming calls to this context: [radio] type=user disallow=all allow=ulaw allow=gsm codecpriority=host context=radio-secure transfer=no I build my own configs so I don't rely on the portal generating the configs for me, as I have a lot of custom dialplan code in extensions.conf. I'm still running diff's against my old files so I may undoubtedly uncover some more "new" stuff ;) 73 Stephen K1LNX From w7ry at centurytel.net Wed Jun 20 02:33:39 2012 From: w7ry at centurytel.net (Jim W7RY) Date: Tue, 19 Jun 2012 19:33:39 -0700 Subject: [App_rpt-users] Server/Node Relation RTCM Message-ID: <9AECE967B01842939EC5CF2C381117BF@JimsLaptop> I?m still not clear on the server/node relationship. I?m going to get my RTCM set up and working, but I have a question. The RTCM needs to be pointed to a SERVER correct? So, I can point the RTCM ?node? (it?s not really considered a node is it)? to one of the servers that I already have a node set up on? Or do I need to set up another server to support the RTCM? If it?s on the same server as another node, how do you manage multiple nodes on one server? I just signed up for a DNS on no-ip.com so I think I have that set up.... But I need to figure how to set that info into the node server that I?m going to use to ?host? the RTCM. Thanks in advance for the help! 73 Jim W7RY -------------- next part -------------- An HTML attachment was scrubbed... URL: From tim.sawyer at me.com Wed Jun 20 03:55:09 2012 From: tim.sawyer at me.com (Tim Sawyer) Date: Tue, 19 Jun 2012 20:55:09 -0700 Subject: [App_rpt-users] Server/Node Relation RTCM In-Reply-To: <9AECE967B01842939EC5CF2C381117BF@JimsLaptop> References: <9AECE967B01842939EC5CF2C381117BF@JimsLaptop> Message-ID: <8849054E-E975-48ED-9531-741563ECA769@me.com> Think of an RTCM as a radio interface, as a way to connect your radio to a computer. It's not a node. It is the physical interface to a computer via ethernet. A node is a number on the Allstar network. It's the virtual representation of a radio in the Allstar network. A server is a computer that hosts one or more nodes. Yes, you can add another node to your existing server. You'll add the node by adding a whole new node stanza to rpt.conf (there is other stuff you have to set up, see http://ohnosec.org/drupal/node/49 ). Only two items will be different about the new node stanza; the node number and the rxchannel = Voter/your_node_no. The RTCM must be configured with the address (or DNS name, that's where your no-ip.com will come in) of your server. The RTCM must also be configured with host and client passwords that match the ones on the server in voter.conf. I hope that helps you get started. -- Tim :wq On Jun 19, 2012, at 7:33 PM, Jim W7RY wrote: > I?m still not clear on the server/node relationship. I?m going to get my RTCM set up and working, but I have a question. The RTCM needs to be pointed to a SERVER correct? > > So, I can point the RTCM ?node? (it?s not really considered a node is it)? to one of the servers that I already have a node set up on? Or do I need to set up another server to support the RTCM? If it?s on the same server as another node, how do you manage multiple nodes on one server? > > I just signed up for a DNS on no-ip.com so I think I have that set up.... But I need to figure how to set that info into the node server that I?m going to use to ?host? the RTCM. > > Thanks in advance for the help! > 73 > Jim W7RY > > > > > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From pete.elke at esquared.com Wed Jun 20 17:16:33 2012 From: pete.elke at esquared.com (Peter Elke) Date: Wed, 20 Jun 2012 17:16:33 -0000 Subject: [App_rpt-users] Server/Node Relation RTCM In-Reply-To: <8849054E-E975-48ED-9531-741563ECA769@me.com> References: <9AECE967B01842939EC5CF2C381117BF@JimsLaptop> <8849054E-E975-48ED-9531-741563ECA769@me.com> Message-ID: <8035B62A7B044D4B81015D5C49D1627D7EDF64@webmail.esquared.net> You have to think of the RTCM as a remotely connected URI unbound via UDP. You still need all the other Allstar parts (asterisk server, node number, inbound port on 4569 etc)... Pete From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Tim Sawyer Sent: Tuesday, June 19, 2012 11:55 PM To: APP RPT Subject: Re: [App_rpt-users] Server/Node Relation RTCM Think of an RTCM as a radio interface, as a way to connect your radio to a computer. It's not a node. It is the physical interface to a computer via ethernet. A node is a number on the Allstar network. It's the virtual representation of a radio in the Allstar network. A server is a computer that hosts one or more nodes. Yes, you can add another node to your existing server. You'll add the node by adding a whole new node stanza to rpt.conf (there is other stuff you have to set up, see http://ohnosec.org/drupal/node/49 ). Only two items will be different about the new node stanza; the node number and the rxchannel = Voter/your_node_no. The RTCM must be configured with the address (or DNS name, that's where your no-ip.com will come in) of your server. The RTCM must also be configured with host and client passwords that match the ones on the server in voter.conf. I hope that helps you get started. -- Tim :wq On Jun 19, 2012, at 7:33 PM, Jim W7RY wrote: I'm still not clear on the server/node relationship. I'm going to get my RTCM set up and working, but I have a question. The RTCM needs to be pointed to a SERVER correct? So, I can point the RTCM "node" (it's not really considered a node is it)? to one of the servers that I already have a node set up on? Or do I need to set up another server to support the RTCM? If it's on the same server as another node, how do you manage multiple nodes on one server? I just signed up for a DNS on no-ip.com so I think I have that set up.... But I need to figure how to set that info into the node server that I'm going to use to "host" the RTCM. Thanks in advance for the help! 73 Jim W7RY _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From yokshs at gmail.com Wed Jun 20 21:52:33 2012 From: yokshs at gmail.com (K&R Yoksh) Date: Wed, 20 Jun 2012 16:52:33 -0500 Subject: [App_rpt-users] allstar-sys context References: Message-ID: <566B93C68F3C4D31B306F3B4741E4D58@main> Stephen, Glad to see you're bringing your node back online! Feel free to give me a call on 2212 when you're ready to test it out. 73 Kyle K0KN Olathe, KS ----- Original Message ----- > Date: Wed, 20 Jun 2012 00:12:56 +0000 > From: Stephen - K1LNX > To: "app_rpt-users at ohnosec.org" > I'm slowly bringing my Allstar node back online (hopefully it will work > in ESXI, crossing fingers! So far so good) and I noticed a few new > contexts in extensions.conf and iax.conf that wasn't there in the past. > It looks like the allstar-public context is used for the web transceiver > portal which I don't plan on using, but I don't quite understand the > allstar-sys context. Has this changed from the past? I've always just > used radio-secure which contains the following (don't think this is > different from the default): > > extensions.conf: > [radio-secure] > exten => ${NODE},1,rpt,${NODE} > > And in my IAX.conf I just pass the incoming calls to this context: > [radio] > type=user > disallow=all > allow=ulaw > allow=gsm > codecpriority=host > context=radio-secure > transfer=no > > I build my own configs so I don't rely on the portal generating the > configs for me, as I have a lot of custom dialplan code in > extensions.conf. > > I'm still running diff's against my old files so I may undoubtedly > uncover some more "new" stuff ;) > > 73 > Stephen > K1LNX From kp4tr.ramon at gmail.com Thu Jun 21 05:02:58 2012 From: kp4tr.ramon at gmail.com ((KP4TR)Ramon Gonzalez) Date: Thu, 21 Jun 2012 01:02:58 -0400 Subject: [App_rpt-users] Alternate port to 4569 Message-ID: <4FE2AB02.1010705@gmail.com> Hello, This may be a simple question. In iax.conf, it indicates the default UDP port to bind to (4569). Is it possible to use an alternate port other than 4569 and make change here? In some other post they mention to change configuration on allstar server network settings, but I don't believe that has anything to do other than to download that configuration to the server if requested by me. I know port forwarding needs to change in router and asterisk restarted. Thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL: From donh at sigma.net Thu Jun 21 05:43:10 2012 From: donh at sigma.net (Don Hackler) Date: Wed, 20 Jun 2012 22:43:10 -0700 Subject: [App_rpt-users] Alternate port to 4569 In-Reply-To: <4FE2AB02.1010705@gmail.com> References: <4FE2AB02.1010705@gmail.com> Message-ID: <9DC14528-167C-4062-A5C0-AA2C692723B5@sigma.net> You can use alternate ports for IAX. I'm using 4568, since 4569 is already occupied by another Asterisk switch. You have to be careful of the order of the bind port and bind address in iax.conf and I think you have to call them both out if you are not using the default port. This is what's working in my iax.conf: . . . [general] bindport=4568 bindaddr=0.0.0.0 . . . You also have to call out the port number in the server configuration -> (your server ID) -> network configuration of the portal. This is how the other nodes find out they need to connect to you on your alternate port number. On Jun 20, 2012, at 10:02 PM, (KP4TR)Ramon Gonzalez wrote: > Hello, > > This may be a simple question. In iax.conf, it indicates the default UDP port to bind to (4569). Is it possible to use an alternate port other than 4569 and make change here? > > In some other post they mention to change configuration on allstar server network settings, but I don't believe that has anything to do other than to download that configuration to the server if requested by me. > > I know port forwarding needs to change in router and asterisk restarted. > > Thanks. > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From kp4tr.ramon at gmail.com Thu Jun 21 22:18:07 2012 From: kp4tr.ramon at gmail.com ((KP4TR)Ramon Gonzalez) Date: Thu, 21 Jun 2012 18:18:07 -0400 Subject: [App_rpt-users] Alternate port to 4569 In-Reply-To: <9DC14528-167C-4062-A5C0-AA2C692723B5@sigma.net> References: <4FE2AB02.1010705@gmail.com> <9DC14528-167C-4062-A5C0-AA2C692723B5@sigma.net> Message-ID: <4FE39D9F.7030806@gmail.com> Great! This is helpful. That way I can test out 2 servers connected to the same IP address before I ship to alternate site. Thanks! On 6/21/2012 1:43 AM, Don Hackler wrote: > You can use alternate ports for IAX. > I'm using 4568, since 4569 is already occupied by another Asterisk switch. > > You have to be careful of the order of the bind port and bind address > in iax.conf and I think you have to call them both out if you are not > using the default port. This is what's working in my iax.conf: > . . . > [general] > bindport=4568 > bindaddr=0.0.0.0 > . . . > > > You also have to call out the port number in the server configuration > -> (your server ID) -> network configuration of the portal. > This is how the other nodes find out they need to connect to you on > your alternate port number. > > > On Jun 20, 2012, at 10:02 PM, (KP4TR)Ramon Gonzalez wrote: > >> Hello, >> >> This may be a simple question. In iax.conf, it indicates the default >> UDP port to bind to (4569). Is it possible to use an alternate port >> other than 4569 and make change here? >> >> In some other post they mention to change configuration on allstar >> server network settings, but I don't believe that has anything to do >> other than to download that configuration to the server if requested >> by me. >> >> I know port forwarding needs to change in router and asterisk restarted. >> >> Thanks. >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > -------------- next part -------------- An HTML attachment was scrubbed... URL: From adamson_alan at hotmail.com Fri Jun 22 01:06:01 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Thu, 21 Jun 2012 21:06:01 -0400 Subject: [App_rpt-users] Just curious - Field day related Message-ID: So the whole purpose of Field day, besides having fun, is to test out emergency preparedness, etc. Anyone thought of a huge allstar link up? Yes I know it doesn't count for anything point wise, but it would be fun, test the *system* and I'm sure could create for some colorful after discussions :). Just curious if it's been discussed, if anyone is up for it, etc. Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From n3xcc at repeater-builder.com Fri Jun 22 01:23:15 2012 From: n3xcc at repeater-builder.com (Scott Zimmerman) Date: Thu, 21 Jun 2012 21:23:15 -0400 Subject: [App_rpt-users] Just curious - Field day related In-Reply-To: References: Message-ID: <4FE3C903.7080707@repeater-builder.com> Anyone is free to connect to node #2135 of the WAN system in western PA. I'd love to see how many connections it can handle without crashing. It's a fairly hefty server with a BIG pipe to the internet. I guess we should pick a time for all to connect. How does 1600 eastern sound? Scott - Core member of the WAN system. Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Road Boswell, PA 15531 On 6/21/2012 9:06 PM, Alan Adamson wrote: > So the whole purpose of Field day, besides having fun, is to test out emergency preparedness, etc. > Anyone thought of a huge allstar link up? Yes I know it doesn't count for anything point wise, but > it would be fun, test the *system* and I'm sure could create for some colorful after discussions :)? > > Just curious if it's been discussed, if anyone is up for it, etc. > > Alan > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > From wb6egr at gmail.com Fri Jun 22 01:23:34 2012 From: wb6egr at gmail.com (Kirk) Date: Thu, 21 Jun 2012 15:23:34 -1000 Subject: [App_rpt-users] Just curious - Field day related In-Reply-To: References: Message-ID: It doesnt need "testing" look at node 2135 or the winsystem on a daily basis..... Sent from my iPhone 4, I am out and about..... On Jun 21, 2012, at 3:06 PM, Alan Adamson wrote: > So the whole purpose of Field day, besides having fun, is to test out emergency preparedness, etc. Anyone thought of a huge allstar link up? Yes I know it doesn't count for anything point wise, but it would be fun, test the *system* and I'm sure could create for some colorful after discussions :)? > > Just curious if it's been discussed, if anyone is up for it, etc. > > Alan > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From adamson_alan at hotmail.com Fri Jun 22 01:34:04 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Thu, 21 Jun 2012 21:34:04 -0400 Subject: [App_rpt-users] Just curious - Field day related In-Reply-To: <02c301cd5016$70fc06c0$52f41440$@repeater-builder.com> References: <02c301cd5016$70fc06c0$52f41440$@repeater-builder.com> Message-ID: Scott we are talking Saturday correct... Field day starts at 2p on Sat if I remember right... this from the arrl site " Field Day is always the fourth full weekend of June, beginning at 1800 UTC Saturday and running through 2059 UTC Sunday. Field Day 2012 will be held June 23-24, 2012." so doing it at 1600 eastern would be a good time I think that would be 2 hours after the start if everyone remembers... maybe it makes sense to connect earlier that the 2p eastern start? Just kicking it around. As to the WINS or the WAN-RS, they do have a bunch of connections, but I'm thinking... like a 100 or more :).... Course I don't know how wide of a net this list covers for node owners... :) Just thinking out loud. Alan -----Original Message----- From: Scott Zimmerman [mailto:n3xcc at repeater-builder.com] Sent: Thursday, June 21, 2012 9:23 PM To: Alan Adamson Cc: app_rpt-users at ohnosec.org; Kevin Custer Subject: Re: [App_rpt-users] Just curious - Field day related Anyone is free to connect to node #2135 of the WAN system in western PA. I'd love to see how many connections it can handle without crashing. It's a fairly hefty server with a BIG pipe to the internet. I guess we should pick a time for all to connect. How does 1600 eastern sound? Scott - Core member of the WAN system. Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Road Boswell, PA 15531 On 6/21/2012 9:06 PM, Alan Adamson wrote: > So the whole purpose of Field day, besides having fun, is to test out emergency preparedness, etc. > Anyone thought of a huge allstar link up? Yes I know it doesn't count for anything point wise, but > it would be fun, test the *system* and I'm sure could create for some colorful after discussions :). > > Just curious if it's been discussed, if anyone is up for it, etc. > > Alan > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > From n3xcc at repeater-builder.com Fri Jun 22 02:00:35 2012 From: n3xcc at repeater-builder.com (Scott Zimmerman) Date: Thu, 21 Jun 2012 22:00:35 -0400 Subject: [App_rpt-users] Just curious - Field day related In-Reply-To: References: <02c301cd5016$70fc06c0$52f41440$@repeater-builder.com> Message-ID: <4FE3D1C3.3060704@repeater-builder.com> It doesn't matter to me what time. I just figured there should be a "meeting time" rather than just leaving it to chance. My thoughts on 4PM eastern were this: By two hours into Field Day it might provide some relief to those operators that had been sitting in front of a radio with headphones on for those two hours. (numb a$$ relief!!) Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Road Boswell, PA 15531 On 6/21/2012 9:34 PM, Alan Adamson wrote: > Scott we are talking Saturday correct... Field day starts at 2p on Sat if I > remember right... this from the arrl site > > " Field Day is always the fourth full weekend of June, beginning at 1800 UTC > Saturday and running through 2059 UTC Sunday. Field Day 2012 will be held > June 23-24, 2012." > > so doing it at 1600 eastern would be a good time I think that would be 2 > hours after the start if everyone remembers... maybe it makes sense to > connect earlier that the 2p eastern start? > > Just kicking it around. > > As to the WINS or the WAN-RS, they do have a bunch of connections, but I'm > thinking... like a 100 or more :).... Course I don't know how wide of a net > this list covers for node owners... :) > > Just thinking out loud. > > Alan > > -----Original Message----- > From: Scott Zimmerman [mailto:n3xcc at repeater-builder.com] > Sent: Thursday, June 21, 2012 9:23 PM > To: Alan Adamson > Cc: app_rpt-users at ohnosec.org; Kevin Custer > Subject: Re: [App_rpt-users] Just curious - Field day related > > Anyone is free to connect to node #2135 of the WAN system in western PA. I'd > love to see how many > connections it can handle without crashing. It's a fairly hefty server with > a BIG pipe to the internet. > > I guess we should pick a time for all to connect. How does 1600 eastern > sound? > > Scott - Core member of the WAN system. > > Scott Zimmerman > Amateur Radio Call N3XCC > 474 Barnett Road > Boswell, PA 15531 > > > On 6/21/2012 9:06 PM, Alan Adamson wrote: >> So the whole purpose of Field day, besides having fun, is to test out > emergency preparedness, etc. >> Anyone thought of a huge allstar link up? Yes I know it doesn't count for > anything point wise, but >> it would be fun, test the *system* and I'm sure could create for some > colorful after discussions :). >> >> Just curious if it's been discussed, if anyone is up for it, etc. >> >> Alan >> >> >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> > > > From bdboyle at bdboyle.com Fri Jun 22 02:11:07 2012 From: bdboyle at bdboyle.com (Bryan D. Boyle) Date: Thu, 21 Jun 2012 22:11:07 -0400 Subject: [App_rpt-users] Just curious - Field day related In-Reply-To: References: Message-ID: <4FE3D43B.80604@bdboyle.com> On 6/21/2012 9:23 PM, Kirk wrote: > It doesnt need "testing" look at node 2135 or the winsystem on a daily basis..... > > Sent from my iPhone 4, I am out and about..... I agree. besides...supposed to be out in the field (hence the term "Field Day"). Can it be done? Probably. But, I think Ma Bell interconnected VoIP telephone switches a long time ago via digital signaling. So it would prove...??? Got other things to do this weekend...nothing to do with Field Day. From adamson_alan at hotmail.com Fri Jun 22 02:26:51 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Thu, 21 Jun 2012 22:26:51 -0400 Subject: [App_rpt-users] Just curious - Field day related In-Reply-To: <02c701cd501b$7a0db470$6e291d50$@repeater-builder.com> References: <02c301cd5016$70fc06c0$52f41440$@repeater-builder.com> <02c701cd501b$7a0db470$6e291d50$@repeater-builder.com> Message-ID: Ok, 4p eastern it is... I'll plan to nook my repeater node to ya... If nothing else it will give me something new to listen too ;)... Thanks Scott. Alan -----Original Message----- From: Scott Zimmerman [mailto:n3xcc at repeater-builder.com] Sent: Thursday, June 21, 2012 10:01 PM To: Alan Adamson Cc: app_rpt-users at ohnosec.org; 'Kevin Custer' Subject: Re: [App_rpt-users] Just curious - Field day related It doesn't matter to me what time. I just figured there should be a "meeting time" rather than just leaving it to chance. My thoughts on 4PM eastern were this: By two hours into Field Day it might provide some relief to those operators that had been sitting in front of a radio with headphones on for those two hours. (numb a$$ relief!!) Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Road Boswell, PA 15531 On 6/21/2012 9:34 PM, Alan Adamson wrote: > Scott we are talking Saturday correct... Field day starts at 2p on Sat if I > remember right... this from the arrl site > > " Field Day is always the fourth full weekend of June, beginning at 1800 UTC > Saturday and running through 2059 UTC Sunday. Field Day 2012 will be held > June 23-24, 2012." > > so doing it at 1600 eastern would be a good time I think that would be 2 > hours after the start if everyone remembers... maybe it makes sense to > connect earlier that the 2p eastern start? > > Just kicking it around. > > As to the WINS or the WAN-RS, they do have a bunch of connections, but I'm > thinking... like a 100 or more :).... Course I don't know how wide of a net > this list covers for node owners... :) > > Just thinking out loud. > > Alan > > -----Original Message----- > From: Scott Zimmerman [mailto:n3xcc at repeater-builder.com] > Sent: Thursday, June 21, 2012 9:23 PM > To: Alan Adamson > Cc: app_rpt-users at ohnosec.org; Kevin Custer > Subject: Re: [App_rpt-users] Just curious - Field day related > > Anyone is free to connect to node #2135 of the WAN system in western PA. I'd > love to see how many > connections it can handle without crashing. It's a fairly hefty server with > a BIG pipe to the internet. > > I guess we should pick a time for all to connect. How does 1600 eastern > sound? > > Scott - Core member of the WAN system. > > Scott Zimmerman > Amateur Radio Call N3XCC > 474 Barnett Road > Boswell, PA 15531 > > > On 6/21/2012 9:06 PM, Alan Adamson wrote: >> So the whole purpose of Field day, besides having fun, is to test out > emergency preparedness, etc. >> Anyone thought of a huge allstar link up? Yes I know it doesn't count for > anything point wise, but >> it would be fun, test the *system* and I'm sure could create for some > colorful after discussions :). >> >> Just curious if it's been discussed, if anyone is up for it, etc. >> >> Alan >> >> >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> > > > From n9gmr at me.com Fri Jun 22 10:09:27 2012 From: n9gmr at me.com (Matt Roberts) Date: Fri, 22 Jun 2012 06:09:27 -0400 Subject: [App_rpt-users] Just curious - Field day related In-Reply-To: References: <02c301cd5016$70fc06c0$52f41440$@repeater-builder.com> Message-ID: <04AB41BA-DA7E-4A61-97EC-23505A51E385@me.com> Another place you can connect for field day activities is the Handiham Echolink conference at node number 494492. Matt Roberts n9gmr at me.com Sent from my iPhone On Jun 21, 2012, at 9:34 PM, Alan Adamson wrote: > Scott we are talking Saturday correct... Field day starts at 2p on Sat if I > remember right... this from the arrl site > > " Field Day is always the fourth full weekend of June, beginning at 1800 UTC > Saturday and running through 2059 UTC Sunday. Field Day 2012 will be held > June 23-24, 2012." > > so doing it at 1600 eastern would be a good time I think that would be 2 > hours after the start if everyone remembers... maybe it makes sense to > connect earlier that the 2p eastern start? > > Just kicking it around. > > As to the WINS or the WAN-RS, they do have a bunch of connections, but I'm > thinking... like a 100 or more :).... Course I don't know how wide of a net > this list covers for node owners... :) > > Just thinking out loud. > > Alan > > -----Original Message----- > From: Scott Zimmerman [mailto:n3xcc at repeater-builder.com] > Sent: Thursday, June 21, 2012 9:23 PM > To: Alan Adamson > Cc: app_rpt-users at ohnosec.org; Kevin Custer > Subject: Re: [App_rpt-users] Just curious - Field day related > > Anyone is free to connect to node #2135 of the WAN system in western PA. I'd > love to see how many > connections it can handle without crashing. It's a fairly hefty server with > a BIG pipe to the internet. > > I guess we should pick a time for all to connect. How does 1600 eastern > sound? > > Scott - Core member of the WAN system. > > Scott Zimmerman > Amateur Radio Call N3XCC > 474 Barnett Road > Boswell, PA 15531 > > > On 6/21/2012 9:06 PM, Alan Adamson wrote: >> So the whole purpose of Field day, besides having fun, is to test out > emergency preparedness, etc. >> Anyone thought of a huge allstar link up? Yes I know it doesn't count for > anything point wise, but >> it would be fun, test the *system* and I'm sure could create for some > colorful after discussions :). >> >> Just curious if it's been discussed, if anyone is up for it, etc. >> >> Alan >> >> >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users From rob at pectol.com Fri Jun 22 13:32:58 2012 From: rob at pectol.com (Robert Pectol) Date: Fri, 22 Jun 2012 07:32:58 -0600 Subject: [App_rpt-users] =?utf-8?q?Just_curious_-_Field_day_related?= In-Reply-To: References: <02c301cd5016$70fc06c0$52f41440$@repeater-builder.com> <02c701cd501b$7a0db470$6e291d50$@repeater-builder.com> Message-ID: <3531c5db6e587af48696e313e5ebacf2@pectol.com> Hehe... node nooking! :) --- Rob On 2012-06-21 20:26, Alan Adamson wrote: > Ok, 4p eastern it is... I'll plan to nook my repeater node to ya... > If > nothing else it will give me something new to listen too ;)... > > Thanks Scott. > > Alan > > -----Original Message----- > From: Scott Zimmerman [mailto:n3xcc at repeater-builder.com] > Sent: Thursday, June 21, 2012 10:01 PM > To: Alan Adamson > Cc: app_rpt-users at ohnosec.org; 'Kevin Custer' > Subject: Re: [App_rpt-users] Just curious - Field day related > > It doesn't matter to me what time. I just figured there should be a > "meeting > time" rather than just > leaving it to chance. > > My thoughts on 4PM eastern were this: By two hours into Field Day it > might > provide some relief to > those operators that had been sitting in front of a radio with > headphones on > for those two hours. > (numb a$$ relief!!) > > Scott > > Scott Zimmerman > Amateur Radio Call N3XCC > 474 Barnett Road > Boswell, PA 15531 > > > On 6/21/2012 9:34 PM, Alan Adamson wrote: >> Scott we are talking Saturday correct... Field day starts at 2p on >> Sat if > I >> remember right... this from the arrl site >> >> " Field Day is always the fourth full weekend of June, beginning at >> 1800 > UTC >> Saturday and running through 2059 UTC Sunday. Field Day 2012 will be >> held >> June 23-24, 2012." >> >> so doing it at 1600 eastern would be a good time I think that would >> be 2 >> hours after the start if everyone remembers... maybe it makes sense >> to >> connect earlier that the 2p eastern start? >> >> Just kicking it around. >> >> As to the WINS or the WAN-RS, they do have a bunch of connections, >> but I'm >> thinking... like a 100 or more :).... Course I don't know how wide >> of a > net >> this list covers for node owners... :) >> >> Just thinking out loud. >> >> Alan >> >> -----Original Message----- >> From: Scott Zimmerman [mailto:n3xcc at repeater-builder.com] >> Sent: Thursday, June 21, 2012 9:23 PM >> To: Alan Adamson >> Cc: app_rpt-users at ohnosec.org; Kevin Custer >> Subject: Re: [App_rpt-users] Just curious - Field day related >> >> Anyone is free to connect to node #2135 of the WAN system in western >> PA. > I'd >> love to see how many >> connections it can handle without crashing. It's a fairly hefty >> server > with >> a BIG pipe to the internet. >> >> I guess we should pick a time for all to connect. How does 1600 >> eastern >> sound? >> >> Scott - Core member of the WAN system. >> >> Scott Zimmerman >> Amateur Radio Call N3XCC >> 474 Barnett Road >> Boswell, PA 15531 >> >> >> On 6/21/2012 9:06 PM, Alan Adamson wrote: >>> So the whole purpose of Field day, besides having fun, is to test >>> out >> emergency preparedness, etc. >>> Anyone thought of a huge allstar link up? Yes I know it doesn't >>> count > for >> anything point wise, but >>> it would be fun, test the *system* and I'm sure could create for >>> some >> colorful after discussions :). >>> >>> Just curious if it's been discussed, if anyone is up for it, etc. >>> >>> Alan >>> >>> >>> >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users at ohnosec.org >>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >> >> >> > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users From adamson_alan at hotmail.com Fri Jun 22 19:46:47 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Fri, 22 Jun 2012 15:46:47 -0400 Subject: [App_rpt-users] From the whacky idea department Message-ID: Ok, so I've been playing with Ramesh's Free*Star distribution. And it got me to thinking. I wonder, if you used an RTCM to take the analog signal off an Analog FM repeater from a D-Star transmitter (assuming you were coming off the discriminator at the repeater).. And you pushed that audio across the internet back to your allstar box. Now on a separate node, you used a URI to interconnect to a GMSK node adapter. You then created a link between the RTCM and the URI/GSMK modem. I wonder if all the timing/codec compression/decompression, etc would render the captured D-Star audio useless such that the URI to GMSK couldn't decode it? What I'm thinking is if you were running Free*Star on the same box as Allstar (or a separate one), potentially, you could then serve the data to the D-Star environments and back. All using AllStar for *linking* thereby getting rid of this whole D-Star linking stuff (callsign hell).. One thing I don't know is about DTMF to link setup, etc. (but let's ignore that for a minute). There are obviously issues with separating the FM non-D-Star users from the D-Star uses at the repeater to route one to one RTCM and one to another. I'm just wondering if anyone has wandered this path already and proved or dis-proved the potential theory? Yeah, I know, I have way too much spare time on my hands.. But hey, it's ham radio right? :). Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From adamson_alan at hotmail.com Sat Jun 23 04:31:17 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Sat, 23 Jun 2012 00:31:17 -0400 Subject: [App_rpt-users] Multiple RTCM's Message-ID: I can find no reference to the *name* (client1,2,3,4, etc) on the RTCM itself. So what differentiates one RTCM from another on a 2 node each with an RTCM configuration? I've created the separate stanzas in the voter.conf file, is it the password that differentiates them? These are both running in conventional mode, not voter mode? Or am I missing something else? Thanks in advance, Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From kb2ear at kb2ear.net Sat Jun 23 05:00:12 2012 From: kb2ear at kb2ear.net (Scott Weis) Date: Sat, 23 Jun 2012 01:00:12 -0400 Subject: [App_rpt-users] Multiple RTCM's In-Reply-To: References: Message-ID: <009c01cd50fd$1211d940$36358bc0$@kb2ear.net> The password From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Alan Adamson Sent: Saturday, June 23, 2012 12:31 AM To: app_rpt-users at ohnosec.org Subject: [App_rpt-users] Multiple RTCM's I can find no reference to the *name* (client1,2,3,4, etc) on the RTCM itself. So what differentiates one RTCM from another on a 2 node each with an RTCM configuration? I've created the separate stanzas in the voter.conf file, is it the password that differentiates them? These are both running in conventional mode, not voter mode? Or am I missing something else? Thanks in advance, Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From kp4tr.ramon at gmail.com Sat Jun 23 07:04:36 2012 From: kp4tr.ramon at gmail.com ((KP4TR)Ramon Gonzalez) Date: Sat, 23 Jun 2012 03:04:36 -0400 Subject: [App_rpt-users] Distorted audio - no explanation Message-ID: <4FE56A84.4010706@gmail.com> Hello, I have an interesting situation. I have been using Allstar for over a month discovering its capabilities. Tonite a friend on node 28679 tells me my audio is distorted. Im puzzled because I haven't changed any settings on my node in a few days, although I did setup a new server that will go next week to Puerto Rico. So I turn on a remoterig radio in Chicago (independent of Allstar) to listen to myself, and indeed my audio sounds awful. So I check for all possible causes, but nothing changes. I switched radios, power supplies, moved cables around, but problem continues. I even reset my network and changed switch. Yet I decided to use echolink to connect to same exact hardware/URI FOB etc, and audio sounds perfect. I thought it was my friends radio, but I connected his radio to the WINS network during a net, and audio was fine. So my question is this. My 2 nodes on same server can connect to each other (28532 -> 28689), audio sounds great. I connect to node in Chicago, and audio is awful. I use echolink with same exact hardware on both ends, audio is perfect. So it is not a hardware or audio setting problem. It seems to be network and/or related to VOIP audio. I have yet to test with someone else other then KP4EOP. I even tested with the new server I am setting up, and it also has same issues. Even changed ports. Anyone seen this happen? -------------- next part -------------- An HTML attachment was scrubbed... URL: From telesistant at hotmail.com Sat Jun 23 08:51:11 2012 From: telesistant at hotmail.com (Jim Duuuude) Date: Sat, 23 Jun 2012 01:51:11 -0700 Subject: [App_rpt-users] Distorted audio - no explanation In-Reply-To: <4FE56A84.4010706@gmail.com> References: <4FE56A84.4010706@gmail.com> Message-ID: have you set your audio levels to the standard app_rpt/Allstar TLP? Jim WB6NIL Date: Sat, 23 Jun 2012 03:04:36 -0400 From: kp4tr.ramon at gmail.com To: app_rpt-users at ohnosec.org Subject: [App_rpt-users] Distorted audio - no explanation Hello, I have an interesting situation. I have been using Allstar for over a month discovering its capabilities. Tonite a friend on node 28679 tells me my audio is distorted. Im puzzled because I haven't changed any settings on my node in a few days, although I did setup a new server that will go next week to Puerto Rico. So I turn on a remoterig radio in Chicago (independent of Allstar) to listen to myself, and indeed my audio sounds awful. So I check for all possible causes, but nothing changes. I switched radios, power supplies, moved cables around, but problem continues. I even reset my network and changed switch. Yet I decided to use echolink to connect to same exact hardware/URI FOB etc, and audio sounds perfect. I thought it was my friends radio, but I connected his radio to the WINS network during a net, and audio was fine. So my question is this. My 2 nodes on same server can connect to each other (28532 -> 28689), audio sounds great. I connect to node in Chicago, and audio is awful. I use echolink with same exact hardware on both ends, audio is perfect. So it is not a hardware or audio setting problem. It seems to be network and/or related to VOIP audio. I have yet to test with someone else other then KP4EOP. I even tested with the new server I am setting up, and it also has same issues. Even changed ports. Anyone seen this happen? _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From adamson_alan at hotmail.com Sat Jun 23 14:29:14 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Sat, 23 Jun 2012 10:29:14 -0400 Subject: [App_rpt-users] Is there a way? Message-ID: Curious how I might configure a node to prevent external connections? I have node 12345 that I'd like to be able to connect to from other nodes on the box (local nodes let's call them), but I'd like to not allow remote connections to that node if possible? I searched the archives and found a couple of references, but they looked slightly different. Thanks in advance, Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From kp4tr.ramon at gmail.com Sat Jun 23 15:06:24 2012 From: kp4tr.ramon at gmail.com ((KP4TR)Ramon Gonzalez) Date: Sat, 23 Jun 2012 11:06:24 -0400 Subject: [App_rpt-users] Distorted audio - no explanation In-Reply-To: References: <4FE56A84.4010706@gmail.com> Message-ID: <4FE5DB70.2040103@gmail.com> Yes, audio levels are set perfectly. Believe me, I am totally perplexed as to what is causing this as it just happened out of nowhere. I can connect from one node to another and audio sound great both ways. It's only when I connect outside my network using Allstar. If I use echolink from the one node that has it configured, to the node in Chicago I'm testing with, audio sounds great. Same hardware. It is not an audio level setting problem. It is not a usbradio option setting, as I use 2 entirely different radios and both have same situation. It is not a server setting, as I have tested on 2 separate servers, and same problem. I rebooted both servers several times. No change. The only common thing is my network and ISP. Tested with my IRLP node, all is ok. Tested bandwidth, everything looks good (average 40MBPS up/ 5MBPS down). On 6/23/2012 4:51 AM, Jim Duuuude wrote: > have you set your audio levels to the standard app_rpt/Allstar TLP? > > Jim WB6NIL > > ------------------------------------------------------------------------ > Date: Sat, 23 Jun 2012 03:04:36 -0400 > From: kp4tr.ramon at gmail.com > To: app_rpt-users at ohnosec.org > Subject: [App_rpt-users] Distorted audio - no explanation > > Hello, > > I have an interesting situation. I have been using Allstar for over a > month discovering its capabilities. Tonite a friend on node 28679 > tells me my audio is distorted. Im puzzled because I haven't changed > any settings on my node in a few days, although I did setup a new > server that will go next week to Puerto Rico. > > So I turn on a remoterig radio in Chicago (independent of Allstar) to > listen to myself, and indeed my audio sounds awful. So I check for all > possible causes, but nothing changes. I switched radios, power > supplies, moved cables around, but problem continues. I even reset my > network and changed switch. Yet I decided to use echolink to connect > to same exact hardware/URI FOB etc, and audio sounds perfect. I > thought it was my friends radio, but I connected his radio to the WINS > network during a net, and audio was fine. > > So my question is this. My 2 nodes on same server can connect to each > other (28532 -> 28689), audio sounds great. I connect to node in > Chicago, and audio is awful. I use echolink with same exact hardware > on both ends, audio is perfect. So it is not a hardware or audio > setting problem. It seems to be network and/or related to VOIP audio. > I have yet to test with someone else other then KP4EOP. > > I even tested with the new server I am setting up, and it also has > same issues. Even changed ports. Anyone seen this happen? > > _______________________________________________ App_rpt-users mailing > list App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From telesistant at hotmail.com Sat Jun 23 15:57:46 2012 From: telesistant at hotmail.com (Jim Duuuude) Date: Sat, 23 Jun 2012 08:57:46 -0700 Subject: [App_rpt-users] Distorted audio - no explanation In-Reply-To: <4FE5DB70.2040103@gmail.com> References: <4FE56A84.4010706@gmail.com> , <4FE5DB70.2040103@gmail.com> Message-ID: Well, maybe we should get together, bring up a connection, and swap some tone. Please (off list, of course), send me your phone number and login info to your system (so that I can see it from both ends while we are testing). Time-wise today things are not looking good. It's definitely a majorly serious skater day. My friend and I are going to Westchester and also check out the old (rather bowly) park at Venice. So if I get back soon enough (keeping in mind the time difference there) I will call. However, realistically, we went to bed at about 0200 our time last night (er, this morning I guess). Jim Date: Sat, 23 Jun 2012 11:06:24 -0400 From: kp4tr.ramon at gmail.com To: telesistant at hotmail.com CC: app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] Distorted audio - no explanation Yes, audio levels are set perfectly. Believe me, I am totally perplexed as to what is causing this as it just happened out of nowhere. I can connect from one node to another and audio sound great both ways. It's only when I connect outside my network using Allstar. If I use echolink from the one node that has it configured, to the node in Chicago I'm testing with, audio sounds great. Same hardware. It is not an audio level setting problem. It is not a usbradio option setting, as I use 2 entirely different radios and both have same situation. It is not a server setting, as I have tested on 2 separate servers, and same problem. I rebooted both servers several times. No change. The only common thing is my network and ISP. Tested with my IRLP node, all is ok. Tested bandwidth, everything looks good (average 40MBPS up/ 5MBPS down). On 6/23/2012 4:51 AM, Jim Duuuude wrote: have you set your audio levels to the standard app_rpt/Allstar TLP? Jim WB6NIL Date: Sat, 23 Jun 2012 03:04:36 -0400 From: kp4tr.ramon at gmail.com To: app_rpt-users at ohnosec.org Subject: [App_rpt-users] Distorted audio - no explanation Hello, I have an interesting situation. I have been using Allstar for over a month discovering its capabilities. Tonite a friend on node 28679 tells me my audio is distorted. Im puzzled because I haven't changed any settings on my node in a few days, although I did setup a new server that will go next week to Puerto Rico. So I turn on a remoterig radio in Chicago (independent of Allstar) to listen to myself, and indeed my audio sounds awful. So I check for all possible causes, but nothing changes. I switched radios, power supplies, moved cables around, but problem continues. I even reset my network and changed switch. Yet I decided to use echolink to connect to same exact hardware/URI FOB etc, and audio sounds perfect. I thought it was my friends radio, but I connected his radio to the WINS network during a net, and audio was fine. So my question is this. My 2 nodes on same server can connect to each other (28532 -> 28689), audio sounds great. I connect to node in Chicago, and audio is awful. I use echolink with same exact hardware on both ends, audio is perfect. So it is not a hardware or audio setting problem. It seems to be network and/or related to VOIP audio. I have yet to test with someone else other then KP4EOP. I even tested with the new server I am setting up, and it also has same issues. Even changed ports. Anyone seen this happen? _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From adamson_alan at hotmail.com Sat Jun 23 16:31:16 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Sat, 23 Jun 2012 12:31:16 -0400 Subject: [App_rpt-users] Distorted audio - no explanation In-Reply-To: <016101cd515a$3f294c30$bd7be490$@hotmail.com> References: <4FE56A84.4010706@gmail.com> , <4FE5DB70.2040103@gmail.com> <016101cd515a$3f294c30$bd7be490$@hotmail.com> Message-ID: Ok, I *want* video!!! Doesn't allstar support that already? :).. Alan From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Jim Duuuude Sent: Saturday, June 23, 2012 11:58 AM To: kp4tr.ramon at gmail.com Cc: app_rpt mailing list Subject: Re: [App_rpt-users] Distorted audio - no explanation Well, maybe we should get together, bring up a connection, and swap some tone. Please (off list, of course), send me your phone number and login info to your system (so that I can see it from both ends while we are testing). Time-wise today things are not looking good. It's definitely a majorly serious skater day. My friend and I are going to Westchester and also check out the old (rather bowly) park at Venice. So if I get back soon enough (keeping in mind the time difference there) I will call. However, realistically, we went to bed at about 0200 our time last night (er, this morning I guess). Jim _____ Date: Sat, 23 Jun 2012 11:06:24 -0400 From: kp4tr.ramon at gmail.com To: telesistant at hotmail.com CC: app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] Distorted audio - no explanation Yes, audio levels are set perfectly. Believe me, I am totally perplexed as to what is causing this as it just happened out of nowhere. I can connect from one node to another and audio sound great both ways. It's only when I connect outside my network using Allstar. If I use echolink from the one node that has it configured, to the node in Chicago I'm testing with, audio sounds great. Same hardware. It is not an audio level setting problem. It is not a usbradio option setting, as I use 2 entirely different radios and both have same situation. It is not a server setting, as I have tested on 2 separate servers, and same problem. I rebooted both servers several times. No change. The only common thing is my network and ISP. Tested with my IRLP node, all is ok. Tested bandwidth, everything looks good (average 40MBPS up/ 5MBPS down). On 6/23/2012 4:51 AM, Jim Duuuude wrote: have you set your audio levels to the standard app_rpt/Allstar TLP? Jim WB6NIL _____ Date: Sat, 23 Jun 2012 03:04:36 -0400 From: kp4tr.ramon at gmail.com To: app_rpt-users at ohnosec.org Subject: [App_rpt-users] Distorted audio - no explanation Hello, I have an interesting situation. I have been using Allstar for over a month discovering its capabilities. Tonite a friend on node 28679 tells me my audio is distorted. Im puzzled because I haven't changed any settings on my node in a few days, although I did setup a new server that will go next week to Puerto Rico. So I turn on a remoterig radio in Chicago (independent of Allstar) to listen to myself, and indeed my audio sounds awful. So I check for all possible causes, but nothing changes. I switched radios, power supplies, moved cables around, but problem continues. I even reset my network and changed switch. Yet I decided to use echolink to connect to same exact hardware/URI FOB etc, and audio sounds perfect. I thought it was my friends radio, but I connected his radio to the WINS network during a net, and audio was fine. So my question is this. My 2 nodes on same server can connect to each other (28532 -> 28689), audio sounds great. I connect to node in Chicago, and audio is awful. I use echolink with same exact hardware on both ends, audio is perfect. So it is not a hardware or audio setting problem. It seems to be network and/or related to VOIP audio. I have yet to test with someone else other then KP4EOP. I even tested with the new server I am setting up, and it also has same issues. Even changed ports. Anyone seen this happen? _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From donh at sigma.net Sat Jun 23 16:41:54 2012 From: donh at sigma.net (Don Hackler) Date: Sat, 23 Jun 2012 09:41:54 -0700 Subject: [App_rpt-users] Is there a way? In-Reply-To: References: Message-ID: A few options: 1) don't route incoming IAX connections from your router to the server; nothing will be able to connect from outside. 2) comment out the IAX registration for the node in the configuration file; the all-star portal will consider it off-line; connection info will not be published to the system. 3) create a "local" node number that isn't registered with Allstar at all. (For example, use a 4 digit number that doesn't start with 2 or a five digit number in the 1XXXX range) On Jun 23, 2012, at 7:29 AM, Alan Adamson wrote: > Curious how I might configure a node to prevent external connections? > > > I have node 12345 that I'd like to be able to connect to from other nodes on the box (local nodes let's call them), but I'd like to not allow remote connections to that node if possible? > > I searched the archives and found a couple of references, but they looked slightly different. > > > Thanks in advance, > > Alan > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From adamson_alan at hotmail.com Sat Jun 23 18:58:26 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Sat, 23 Jun 2012 14:58:26 -0400 Subject: [App_rpt-users] Is there a way? In-Reply-To: <017a01cd5160$0c637f90$252a7eb0$@sigma.net> References: <017a01cd5160$0c637f90$252a7eb0$@sigma.net> Message-ID: Wow, Don, why didn't I think of that last one. duh. Leads me to my next question. There is in stanza in the in the rpt.conf file that's called [nodes]. From the description in the rpt comments it would suggest that what needs to be there are *local* only or better *off allstar* nodes, and yet the configuration from the web configuration utility put my allstar nodes in there. So which is it? And would you put the node number there per 3) below? or just in the definition stanza in rpt.conf and the other normal places? Alan From: Don Hackler [mailto:donh at sigma.net] Sent: Saturday, June 23, 2012 12:42 PM To: Alan Adamson Cc: app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] Is there a way? A few options: 1) don't route incoming IAX connections from your router to the server; nothing will be able to connect from outside. 2) comment out the IAX registration for the node in the configuration file; the all-star portal will consider it off-line; connection info will not be published to the system. 3) create a "local" node number that isn't registered with Allstar at all. (For example, use a 4 digit number that doesn't start with 2 or a five digit number in the 1XXXX range) On Jun 23, 2012, at 7:29 AM, Alan Adamson wrote: Curious how I might configure a node to prevent external connections? I have node 12345 that I'd like to be able to connect to from other nodes on the box (local nodes let's call them), but I'd like to not allow remote connections to that node if possible? I searched the archives and found a couple of references, but they looked slightly different. Thanks in advance, Alan _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From donh at sigma.net Sat Jun 23 19:33:21 2012 From: donh at sigma.net (Don Hackler) Date: Sat, 23 Jun 2012 12:33:21 -0700 Subject: [App_rpt-users] Is there a way? In-Reply-To: References: <017a01cd5160$0c637f90$252a7eb0$@sigma.net> Message-ID: <5C001358-ECDA-4F27-8FD9-66CC519590C3@sigma.net> Just after I hit the send button on the last one, I noticed the your node number was 12345?. duh, indeed. When I read your note I mentally registered 12345 as a placeholder variable (like foo or bar). The [nodes] stanza is there so that your local server knows how to connect to certain nodes bypassing the Allstar directory lookup. Your local nodes are there to override the Allstar lookup so you talk to them using the localhost loopback. Otherwise they would go ask Allstar what IP address to use, and you would end up trying to use your outside IP address like any other nodes on the system. Private nodes are there since they would never be in the main Allstar directory. BTW, If you wanted an offsite friend to be able to connect to your private node, he would have to add an entry in his [nodes] stanza with your IP address. On Jun 23, 2012, at 11:58 AM, Alan Adamson wrote: > Wow, Don, why didn't I think of that last one? duh? Leads me to my next question? There is in stanza in the in the rpt.conf file that?s called [nodes]. From the description in the rpt comments it would suggest that what needs to be there are *local* only or better *off allstar* nodes, and yet the configuration from the web configuration utility put my allstar nodes in there? > > So which is it? And would you put the node number there per 3) below? or just in the definition stanza in rpt.conf and the other normal places? > > Alan > > From: Don Hackler [mailto:donh at sigma.net] > Sent: Saturday, June 23, 2012 12:42 PM > To: Alan Adamson > Cc: app_rpt-users at ohnosec.org > Subject: Re: [App_rpt-users] Is there a way? > > A few options: > 1) don't route incoming IAX connections from your router to the server; nothing will be able to connect from outside. > > 2) comment out the IAX registration for the node in the configuration file; the all-star portal will consider it off-line; connection info will not be published to the system. > > 3) create a "local" node number that isn't registered with Allstar at all. (For example, use a 4 digit number that doesn't start with 2 or a five digit number in the 1XXXX range) > > On Jun 23, 2012, at 7:29 AM, Alan Adamson wrote: > > > Curious how I might configure a node to prevent external connections? > > > I have node 12345 that I'd like to be able to connect to from other nodes on the box (local nodes let's call them), but I'd like to not allow remote connections to that node if possible? > > I searched the archives and found a couple of references, but they looked slightly different. > > > Thanks in advance, > > Alan > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From ke2n at cs.com Sat Jun 23 19:33:36 2012 From: ke2n at cs.com (Ken) Date: Sat, 23 Jun 2012 15:33:36 -0400 Subject: [App_rpt-users] Is there a way? In-Reply-To: References: <017a01cd5160$0c637f90$252a7eb0$@sigma.net> Message-ID: <004101cd5177$15d3e9e0$417bbda0$@cs.com> If you go into iax.conf and comment out the "register= " statement then you will have an unregistered node. You can take out the 'statpost" statement in rpt.conf too. Only thing about unregistered nodes is that you must put the actual IP address in the [nodes] stanza of any other node that needs to connect to it. An easier way is to use a control state with link disable - you can turn that on/off with DTMF and there is no need to sprinkle around the actual IP address everywhere http://ohnosec.org/drupal/node/166 GL Ken From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Alan Adamson Sent: Saturday, June 23, 2012 2:58 PM To: 'Don Hackler' Cc: app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] Is there a way? Wow, Don, why didn't I think of that last one. duh. Leads me to my next question. There is in stanza in the in the rpt.conf file that's called [nodes]. From the description in the rpt comments it would suggest that what needs to be there are *local* only or better *off allstar* nodes, and yet the configuration from the web configuration utility put my allstar nodes in there. So which is it? And would you put the node number there per 3) below? or just in the definition stanza in rpt.conf and the other normal places? Alan From: Don Hackler [mailto:donh at sigma.net] Sent: Saturday, June 23, 2012 12:42 PM To: Alan Adamson Cc: app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] Is there a way? A few options: 1) don't route incoming IAX connections from your router to the server; nothing will be able to connect from outside. 2) comment out the IAX registration for the node in the configuration file; the all-star portal will consider it off-line; connection info will not be published to the system. 3) create a "local" node number that isn't registered with Allstar at all. (For example, use a 4 digit number that doesn't start with 2 or a five digit number in the 1XXXX range) On Jun 23, 2012, at 7:29 AM, Alan Adamson wrote: Curious how I might configure a node to prevent external connections? I have node 12345 that I'd like to be able to connect to from other nodes on the box (local nodes let's call them), but I'd like to not allow remote connections to that node if possible? I searched the archives and found a couple of references, but they looked slightly different. Thanks in advance, Alan _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From kp4tr.ramon at gmail.com Sun Jun 24 03:28:02 2012 From: kp4tr.ramon at gmail.com ((KP4TR)Ramon Gonzalez) Date: Sat, 23 Jun 2012 23:28:02 -0400 Subject: [App_rpt-users] Distorted audio - no explanation In-Reply-To: References: <4FE56A84.4010706@gmail.com> , <4FE5DB70.2040103@gmail.com> <016101cd515a$3f294c30$bd7be490$@hotmail.com> Message-ID: <4FE68942.8040508@gmail.com> I am almost 98% sure my problem is related to the IAX jitterbuffer feature The reason I say this is because it happened suddenly, and it was occurring on 2 separate servers within the same network. Also the Remoterig device that allows me to remote control/use a radio uses SIP and has similar features as Allstar/Asterisk that I adjust based on bandwidth. Now I need to understand why this has changed and how to solve it. My Allstar node(s) are currently unusable because I sound with lots of packet loss. But I can hear everyone well, and the echolink connection via Allstar sounds fine. On 6/23/2012 12:31 PM, Alan Adamson wrote: > > Ok, I *want* video!!! Doesn't allstar support that already? :).. > > Alan > > *From:*app_rpt-users-bounces at ohnosec.org > [mailto:app_rpt-users-bounces at ohnosec.org] *On Behalf Of *Jim Duuuude > *Sent:* Saturday, June 23, 2012 11:58 AM > *To:* kp4tr.ramon at gmail.com > *Cc:* app_rpt mailing list > *Subject:* Re: [App_rpt-users] Distorted audio - no explanation > > Well, maybe we should get together, bring up a connection, and swap > some tone. > > Please (off list, of course), send me your phone number and login info > to your > system (so that I can see it from both ends while we are testing). > > Time-wise today things are not looking good. It's definitely a majorly > serious skater day. > My friend and I are going to Westchester and also check out the old > (rather bowly) > park at Venice. > > So if I get back soon enough (keeping in mind the time difference > there) I will call. > However, realistically, we went to bed at about 0200 our time last > night (er, this morning > I guess). > > Jim > > ------------------------------------------------------------------------ > > Date: Sat, 23 Jun 2012 11:06:24 -0400 > From: kp4tr.ramon at gmail.com > To: telesistant at hotmail.com > CC: app_rpt-users at ohnosec.org > Subject: Re: [App_rpt-users] Distorted audio - no explanation > > Yes, audio levels are set perfectly. Believe me, I am totally > perplexed as to what is causing this as it just happened out of nowhere. > > I can connect from one node to another and audio sound great both > ways. It's only when I connect outside my network using Allstar. > If I use echolink from the one node that has it configured, to the > node in Chicago I'm testing with, audio sounds great. Same hardware. > > It is not an audio level setting problem. It is not a usbradio option > setting, as I use 2 entirely different radios and both have same > situation. > It is not a server setting, as I have tested on 2 separate servers, > and same problem. > I rebooted both servers several times. No change. > > The only common thing is my network and ISP. Tested with my IRLP node, > all is ok. Tested bandwidth, everything looks good (average 40MBPS up/ > 5MBPS down). > > On 6/23/2012 4:51 AM, Jim Duuuude wrote: > > have you set your audio levels to the standard app_rpt/Allstar TLP? > > Jim WB6NIL > > ------------------------------------------------------------------------ > > Date: Sat, 23 Jun 2012 03:04:36 -0400 > From: kp4tr.ramon at gmail.com > To: app_rpt-users at ohnosec.org > Subject: [App_rpt-users] Distorted audio - no explanation > > Hello, > > I have an interesting situation. I have been using Allstar for > over a month discovering its capabilities. Tonite a friend on > node 28679 tells me my audio is distorted. Im puzzled because I > haven't changed any settings on my node in a few days, although I > did setup a new server that will go next week to Puerto Rico. > > So I turn on a remoterig radio in Chicago (independent of Allstar) > to listen to myself, and indeed my audio sounds awful. So I check > for all possible causes, but nothing changes. I switched radios, > power supplies, moved cables around, but problem continues. I even > reset my network and changed switch. Yet I decided to use echolink > to connect to same exact hardware/URI FOB etc, and audio sounds > perfect. I thought it was my friends radio, but I connected his > radio to the WINS network during a net, and audio was fine. > > So my question is this. My 2 nodes on same server can connect to > each other (28532 -> 28689), audio sounds great. I connect to node > in Chicago, and audio is awful. I use echolink with same exact > hardware on both ends, audio is perfect. So it is not a hardware > or audio setting problem. It seems to be network and/or related to > VOIP audio. I have yet to test with someone else other then KP4EOP. > > I even tested with the new server I am setting up, and it also has > same issues. Even changed ports. Anyone seen this happen? > > _______________________________________________ App_rpt-users > mailing list App_rpt-users at ohnosec.org > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > -------------- next part -------------- An HTML attachment was scrubbed... URL: From kc9gqr at gmail.com Sun Jun 24 03:49:05 2012 From: kc9gqr at gmail.com (Bradley Haney) Date: Sat, 23 Jun 2012 22:49:05 -0500 Subject: [App_rpt-users] DMK URI Help. Message-ID: <4E97E718-BC09-4930-B116-891C89C5B460@gmail.com> Hello all .. still working on getting a cable correct connecting to a VERTEX 7000 repeater. i got some good info but needing a little more help.. ON Pin 8 of the DMK URI it says CTCSS_DET... I know what it says but i guess i am not quite sure on what it should be hooked to. Should it be hooked up to an OUTPUT of the repeater, input? Also got some good info from jim on setting the rpt.conf to link to link =yes and then duplex =0 since the repeater will be doing the repeating and ID, but what setting should i mess with so the auto patch uses full duplex.. IE it keys the repeater and keeps it key'd until the phone conversation is over.. Bradley From w7ry at centurytel.net Sun Jun 24 04:01:14 2012 From: w7ry at centurytel.net (Jim W7RY) Date: Sat, 23 Jun 2012 21:01:14 -0700 Subject: [App_rpt-users] DMK URI Help. In-Reply-To: <4E97E718-BC09-4930-B116-891C89C5B460@gmail.com> References: <4E97E718-BC09-4930-B116-891C89C5B460@gmail.com> Message-ID: ON Pin 8 of the DMK URI it says CTCSS_DET... I know what it says but i guess i am not quite sure on what it should be hooked to. Should it be hooked up to an OUTPUT of the repeater, input? That would be hooked to the PL decoder. 73 Jim W7RY Bradley _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users From kc9gqr at gmail.com Sun Jun 24 04:03:41 2012 From: kc9gqr at gmail.com (Bradley Haney) Date: Sat, 23 Jun 2012 23:03:41 -0500 Subject: [App_rpt-users] DMK URI Help. In-Reply-To: References: <4E97E718-BC09-4930-B116-891C89C5B460@gmail.com> Message-ID: ok.. must not be used on a vx7000 install. don't see anything the Manual about PL decoder pin on the assy port.. On Jun 23, 2012, at 11:01 PM, Jim W7RY wrote: > > ON Pin 8 of the DMK URI it says CTCSS_DET... I know what it says but i guess i am not quite sure on what it should be hooked to. Should it be hooked up to an OUTPUT of the repeater, input? > > That would be hooked to the PL decoder. > > 73 > Jim W7RY > > > Bradley > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users From wb6egr at gmail.com Sun Jun 24 04:18:42 2012 From: wb6egr at gmail.com (Kirk) Date: Sat, 23 Jun 2012 18:18:42 -1000 Subject: [App_rpt-users] DMK URI Help. In-Reply-To: References: <4E97E718-BC09-4930-B116-891C89C5B460@gmail.com> Message-ID: <165EA4FE-0509-4EC3-A728-105DEC540446@gmail.com> Just tie the PL and carrier sq inputs together and to the same point.... Sent from my iPhone 4, I am out and about..... On Jun 23, 2012, at 6:03 PM, Bradley Haney wrote: > ok.. must not be used on a vx7000 install. don't see anything the Manual about PL decoder pin on the assy port.. > > > On Jun 23, 2012, at 11:01 PM, Jim W7RY wrote: > >> >> ON Pin 8 of the DMK URI it says CTCSS_DET... I know what it says but i guess i am not quite sure on what it should be hooked to. Should it be hooked up to an OUTPUT of the repeater, input? >> >> That would be hooked to the PL decoder. >> >> 73 >> Jim W7RY >> >> >> Bradley >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users From ea8ee1 at gmail.com Sun Jun 24 09:08:14 2012 From: ea8ee1 at gmail.com (ea8ee) Date: Sun, 24 Jun 2012 09:08:14 +0000 Subject: [App_rpt-users] DMK uri FT8900 help Message-ID: Any info about the wiring to minidin 6pind yaesu ? -------------- next part -------------- An HTML attachment was scrubbed... URL: From ke2n at cs.com Sun Jun 24 11:33:12 2012 From: ke2n at cs.com (Ken) Date: Sun, 24 Jun 2012 07:33:12 -0400 Subject: [App_rpt-users] Distorted audio - no explanation In-Reply-To: <4FE68942.8040508@gmail.com> References: <4FE56A84.4010706@gmail.com> , <4FE5DB70.2040103@gmail.com> <016101cd515a$3f294c30$bd7be490$@hotmail.com> <4FE68942.8040508@gmail.com> Message-ID: <009501cd51fd$239ed540$6adc7fc0$@cs.com> My system began having some latency issues (that you could see by monitoring jitterbuffer) when I connected a F.O. media converter elsewhere on the same LAN. The problems went away when I replaced the device with another one. Apparently the first device was flakey and interfered with local internode comms in some way. Did you make any changes to your LAN or could some other device on it have failed? Ken From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of (KP4TR)Ramon Gonzalez Sent: Saturday, June 23, 2012 11:28 PM To: 'app_rpt mailing list' Subject: Re: [App_rpt-users] Distorted audio - no explanation I am almost 98% sure my problem is related to the IAX jitterbuffer feature The reason I say this is because it happened suddenly, and it was occurring on 2 separate servers within the same network. Also the Remoterig device that allows me to remote control/use a radio uses SIP and has similar features as Allstar/Asterisk that I adjust based on bandwidth. Now I need to understand why this has changed and how to solve it. My Allstar node(s) are currently unusable because I sound with lots of packet loss. But I can hear everyone well, and the echolink connection via Allstar sounds fine. On 6/23/2012 12:31 PM, Alan Adamson wrote: Ok, I *want* video!!! Doesn't allstar support that already? :).. Alan From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Jim Duuuude Sent: Saturday, June 23, 2012 11:58 AM To: kp4tr.ramon at gmail.com Cc: app_rpt mailing list Subject: Re: [App_rpt-users] Distorted audio - no explanation Well, maybe we should get together, bring up a connection, and swap some tone. Please (off list, of course), send me your phone number and login info to your system (so that I can see it from both ends while we are testing). Time-wise today things are not looking good. It's definitely a majorly serious skater day. My friend and I are going to Westchester and also check out the old (rather bowly) park at Venice. So if I get back soon enough (keeping in mind the time difference there) I will call. However, realistically, we went to bed at about 0200 our time last night (er, this morning I guess). Jim _____ Date: Sat, 23 Jun 2012 11:06:24 -0400 From: kp4tr.ramon at gmail.com To: telesistant at hotmail.com CC: app_rpt-users at ohnosec.org Subject: Re: [App_rpt-users] Distorted audio - no explanation Yes, audio levels are set perfectly. Believe me, I am totally perplexed as to what is causing this as it just happened out of nowhere. I can connect from one node to another and audio sound great both ways. It's only when I connect outside my network using Allstar. If I use echolink from the one node that has it configured, to the node in Chicago I'm testing with, audio sounds great. Same hardware. It is not an audio level setting problem. It is not a usbradio option setting, as I use 2 entirely different radios and both have same situation. It is not a server setting, as I have tested on 2 separate servers, and same problem. I rebooted both servers several times. No change. The only common thing is my network and ISP. Tested with my IRLP node, all is ok. Tested bandwidth, everything looks good (average 40MBPS up/ 5MBPS down). On 6/23/2012 4:51 AM, Jim Duuuude wrote: have you set your audio levels to the standard app_rpt/Allstar TLP? Jim WB6NIL _____ Date: Sat, 23 Jun 2012 03:04:36 -0400 From: kp4tr.ramon at gmail.com To: app_rpt-users at ohnosec.org Subject: [App_rpt-users] Distorted audio - no explanation Hello, I have an interesting situation. I have been using Allstar for over a month discovering its capabilities. Tonite a friend on node 28679 tells me my audio is distorted. Im puzzled because I haven't changed any settings on my node in a few days, although I did setup a new server that will go next week to Puerto Rico. So I turn on a remoterig radio in Chicago (independent of Allstar) to listen to myself, and indeed my audio sounds awful. So I check for all possible causes, but nothing changes. I switched radios, power supplies, moved cables around, but problem continues. I even reset my network and changed switch. Yet I decided to use echolink to connect to same exact hardware/URI FOB etc, and audio sounds perfect. I thought it was my friends radio, but I connected his radio to the WINS network during a net, and audio was fine. So my question is this. My 2 nodes on same server can connect to each other (28532 -> 28689), audio sounds great. I connect to node in Chicago, and audio is awful. I use echolink with same exact hardware on both ends, audio is perfect. So it is not a hardware or audio setting problem. It seems to be network and/or related to VOIP audio. I have yet to test with someone else other then KP4EOP. I even tested with the new server I am setting up, and it also has same issues. Even changed ports. Anyone seen this happen? _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From kp4tr.ramon at gmail.com Sun Jun 24 15:04:32 2012 From: kp4tr.ramon at gmail.com ((KP4TR)Ramon Gonzalez) Date: Sun, 24 Jun 2012 11:04:32 -0400 Subject: [App_rpt-users] DMK uri FT8900 help In-Reply-To: References: Message-ID: <4FE72C80.6000505@gmail.com> The wiring is same as Kenwood TM-D700 and Icom IC880H (i have used both radios with same cable wiring as Yaesu 8800) Go to page 10: http://www.yaesu.com/downloadFile.cfm?FileID=754&FileCatID=150&FileName=FT%2D8900R%5FSpanish.pdf&FileContentType=application%2Fpdf If using URI FOB and COS from radio, use carrierfrom=usb Make your own cable, or order at http://uricables.com/Yaesu-FT8800R.html On 6/24/2012 5:08 AM, ea8ee wrote: > Any info about the wiring to minidin 6pind yaesu ? > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From adamson_alan at hotmail.com Sun Jun 24 16:40:36 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Sun, 24 Jun 2012 12:40:36 -0400 Subject: [App_rpt-users] Compromise? Message-ID: Anyone know if there is a way to compromise on the telemetry options. I want the node to act like a simplex link with no CT or hang time, when it's keyed local, but when it's keyed remote (from another node), I want HT and CT or at least the option to one tweak them. Duplex=0 kills both but I need the flexibility to set either *or* both. I'm running on a digital repeater, that uses it's built in controller (no this isn't D-Star), I've figure out how to pick of the transcoded audio such that I can send it to allstar, but what I don't want is the HT and CT coming back to the repeater with the delay from allstar on local traffic through the repeater only. But, when a signal comes from allstar, from another link or node, I *do* want at lease the CT. I'll have to see if the HT on the local controller is still in effect. I've just about got my NXDN repeater functional as an NXDN to Allstar bridge (in fact that works today), without double transcoding the digital audio at the repeater (first test were to pick off the transcoded audio from the repeater RX, and let allstar duplex it back. well as you might imagine, lossy transcoded audio, then sent back in to be re-transcoded to a lossy process, to then be decoded by the user radio, didn't sounds so good :). ). Anyway, I'm all most there, just need this last piece of the puzzle. Thanks again, Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From tim.sawyer at me.com Mon Jun 25 15:29:12 2012 From: tim.sawyer at me.com (Tim Sawyer) Date: Mon, 25 Jun 2012 08:29:12 -0700 Subject: [App_rpt-users] Distorted audio - no explanation In-Reply-To: <4FE56A84.4010706@gmail.com> References: <4FE56A84.4010706@gmail.com> Message-ID: <61E7F8B2-B23F-4B2C-A5F5-930FB3E4468B@me.com> Does rebooting the computer fix it? We get an under water sound from time to time on our older computers. Rebooting fixes it. -- Tim :wq On Jun 23, 2012, at 12:04 AM, (KP4TR)Ramon Gonzalez wrote: > Hello, > > I have an interesting situation. I have been using Allstar for over a month discovering its capabilities. Tonite a friend on node 28679 tells me my audio is distorted. Im puzzled because I haven't changed any settings on my node in a few days, although I did setup a new server that will go next week to Puerto Rico. > > So I turn on a remoterig radio in Chicago (independent of Allstar) to listen to myself, and indeed my audio sounds awful. So I check for all possible causes, but nothing changes. I switched radios, power supplies, moved cables around, but problem continues. I even reset my network and changed switch. Yet I decided to use echolink to connect to same exact hardware/URI FOB etc, and audio sounds perfect. I thought it was my friends radio, but I connected his radio to the WINS network during a net, and audio was fine. > > So my question is this. My 2 nodes on same server can connect to each other (28532 -> 28689), audio sounds great. I connect to node in Chicago, and audio is awful. I use echolink with same exact hardware on both ends, audio is perfect. So it is not a hardware or audio setting problem. It seems to be network and/or related to VOIP audio. I have yet to test with someone else other then KP4EOP. > > I even tested with the new server I am setting up, and it also has same issues. Even changed ports. Anyone seen this happen? > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From kb8pmy at kb8pmy.net Tue Jun 26 01:53:50 2012 From: kb8pmy at kb8pmy.net (Ryan Collier) Date: Mon, 25 Jun 2012 21:53:50 -0400 Subject: [App_rpt-users] USB Keying Message-ID: <1340675630325222500@kb8pmy.net> Greetings, I have usb keying on one usb and rx audio and tx audio on another usb. Is there a way I can get the software to do this? I am having a hard time getting the fobs to work. So I have this working in my windows machine and wanted to see If I can transfer the setup to asterisk. Ryan? -------------- next part -------------- An HTML attachment was scrubbed... URL: From g4rky at yahoo.co.uk Tue Jun 26 09:41:46 2012 From: g4rky at yahoo.co.uk (Matt Beasant) Date: Tue, 26 Jun 2012 10:41:46 +0100 Subject: [App_rpt-users] DMK uri FT8900 help In-Reply-To: <4FE72C80.6000505@gmail.com> References: <4FE72C80.6000505@gmail.com> Message-ID: I seem to remember using my 8900 for a link once and found that the COS output was exactly that, simply an output from the carrier squelch. What I am saying is that the COS output is not subject to CTCSS, so even if the tone decoder in the 8900 is set up for decode, the COS line still just follows the carrier squelch. Matt G4RKY Currently in Alcaniz! On 24 June 2012 16:04, (KP4TR)Ramon Gonzalez wrote: > > The wiring is same as Kenwood TM-D700 and Icom IC880H (i have used both > radios with same cable wiring as Yaesu 8800) > > Go to page 10: > http://www.yaesu.com/downloadFile.cfm?FileID=754&FileCatID=150&FileName=FT%2D8900R%5FSpanish.pdf&FileContentType=application%2Fpdf > > If using URI FOB and COS from radio, use carrierfrom=usb > > Make your own cable, or order at http://uricables.com/Yaesu-FT8800R.html > > > > On 6/24/2012 5:08 AM, ea8ee wrote: > > Any info about the wiring to minidin 6pind yaesu ? > > > _______________________________________________ > App_rpt-users mailing listApp_rpt-users at ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From adamson_alan at hotmail.com Tue Jun 26 11:54:38 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Tue, 26 Jun 2012 07:54:38 -0400 Subject: [App_rpt-users] RTCM Question Message-ID: Anyone else noticed this? Maybe my user radio is just a fast switcher. I use and RTCM in conventional mode at my repeater to be the interface for it and Allstar. If I don't remember to keep the PTT held for about a second after I finish talking, as soon as I release the PTT, I get about 1 second (it's actually a smidge shorter than that) of the last few things I said on the air. I'm pretty sure this *repeat* is because of the approx 1 second delay that the RTCM instills in the system. It's about 400ms of startup delay, and about the same of system delays, so the live release of the PTT sees approx 800ms of delayed audio. If I remember to keep the PTT pressed for approx 1 second when I finish talking I don't see this. I'm using a commercial radio, so maybe I'll need to see about a programmed setting to do that for me automagically. Just wondering if others are seeing it as well or if I just have a fast switcher. Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From ke2n at cs.com Tue Jun 26 12:26:23 2012 From: ke2n at cs.com (Ken) Date: Tue, 26 Jun 2012 08:26:23 -0400 Subject: [App_rpt-users] RTCM Question In-Reply-To: References: Message-ID: <003c01cd5396$e6752890$b35f79b0$@cs.com> I have seen this kind of thing between servers at the same location - without an RTCM - when something was causing some latency issues on my LAN. in iax.conf I found the default resyncthreshold= was 1000 ms so I reduced it. I have since fixed the problem with the LAN, but still run resyncthreshold at 300 ms to avoid ever building up a lot of delay in the system. 73 Ken From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Alan Adamson Sent: Tuesday, June 26, 2012 7:55 AM To: app_rpt-users at ohnosec.org Subject: [App_rpt-users] RTCM Question Anyone else noticed this? Maybe my user radio is just a fast switcher. I use and RTCM in conventional mode at my repeater to be the interface for it and Allstar. If I don't remember to keep the PTT held for about a second after I finish talking, as soon as I release the PTT, I get about 1 second (it's actually a smidge shorter than that) of the last few things I said on the air. I'm pretty sure this *repeat* is because of the approx 1 second delay that the RTCM instills in the system. It's about 400ms of startup delay, and about the same of system delays, so the live release of the PTT sees approx 800ms of delayed audio. If I remember to keep the PTT pressed for approx 1 second when I finish talking I don't see this. I'm using a commercial radio, so maybe I'll need to see about a programmed setting to do that for me automagically. Just wondering if others are seeing it as well or if I just have a fast switcher. Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From adamson_alan at hotmail.com Tue Jun 26 12:50:22 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Tue, 26 Jun 2012 08:50:22 -0400 Subject: [App_rpt-users] RTCM Question In-Reply-To: <005301cd5397$ca95bb70$5fc13250$@cs.com> References: <005301cd5397$ca95bb70$5fc13250$@cs.com> Message-ID: Thanks Ken, I suspect that with the RTCM and the 2 buffers that need to be filled, I'm not sure this can be resolved so easily. It's talked about in the manual, and you wouldn't think you wouldn't notice a second of delay (finger being that quick to unkey - now key, sheesh, I think there is lightning responsiveness there :)), but it bites me every time. it's just become my "oh the allstar is functioning" detector, then I get the CT :). Alan From: Ken [mailto:ke2n at cs.com] Sent: Tuesday, June 26, 2012 8:26 AM To: 'Alan Adamson'; app_rpt-users at ohnosec.org Subject: RE: [App_rpt-users] RTCM Question I have seen this kind of thing between servers at the same location - without an RTCM - when something was causing some latency issues on my LAN. in iax.conf I found the default resyncthreshold= was 1000 ms so I reduced it. I have since fixed the problem with the LAN, but still run resyncthreshold at 300 ms to avoid ever building up a lot of delay in the system. 73 Ken From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Alan Adamson Sent: Tuesday, June 26, 2012 7:55 AM To: app_rpt-users at ohnosec.org Subject: [App_rpt-users] RTCM Question Anyone else noticed this? Maybe my user radio is just a fast switcher. I use and RTCM in conventional mode at my repeater to be the interface for it and Allstar. If I don't remember to keep the PTT held for about a second after I finish talking, as soon as I release the PTT, I get about 1 second (it's actually a smidge shorter than that) of the last few things I said on the air. I'm pretty sure this *repeat* is because of the approx 1 second delay that the RTCM instills in the system. It's about 400ms of startup delay, and about the same of system delays, so the live release of the PTT sees approx 800ms of delayed audio. If I remember to keep the PTT pressed for approx 1 second when I finish talking I don't see this. I'm using a commercial radio, so maybe I'll need to see about a programmed setting to do that for me automagically. Just wondering if others are seeing it as well or if I just have a fast switcher. Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From rpt2 at chuck.midlandsnetworking.com Tue Jun 26 13:08:21 2012 From: rpt2 at chuck.midlandsnetworking.com (Chuck Henderson) Date: Tue, 26 Jun 2012 08:08:21 -0500 Subject: [App_rpt-users] RTCM Question In-Reply-To: <003c01cd5396$e6752890$b35f79b0$@cs.com> References: <003c01cd5396$e6752890$b35f79b0$@cs.com> Message-ID: in voter.conf try setting buflen = 200 and in the RTCM configuration try setting 7 - Tx Buffer Length (1200) These settings work for me and reduce the latency. I have less than 10ms of network latency between the RTCM and the server, if you have more latency in your network then reducing these settings could prevent your system from working correctly. I found that I could reduce the buflen to 120 but with that setting reliability suffered when there was any extra network latency. 140 seemed to be reliable enough but I set it to 200 just to be sure. Chuck On Tue, Jun 26, 2012 at 7:26 AM, Ken wrote: > I have seen this kind of thing between servers at the same location - > without an RTCM - when something was causing some latency issues on my LAN. > **** > > ** ** > > in iax.conf I found the default resyncthreshold= was 1000 ms so I reduced > it.**** > > ** ** > > I have since fixed the problem with the LAN, but still run resyncthreshold > at 300 ms to avoid ever building up a lot of delay in the system.**** > > ** ** > > 73**** > > Ken**** > > ** ** > > ** ** > > *From:* app_rpt-users-bounces at ohnosec.org [mailto: > app_rpt-users-bounces at ohnosec.org] *On Behalf Of *Alan Adamson > *Sent:* Tuesday, June 26, 2012 7:55 AM > *To:* app_rpt-users at ohnosec.org > *Subject:* [App_rpt-users] RTCM Question**** > > ** ** > > Anyone else noticed this? Maybe my user radio is just a fast switcher.*** > * > > I use and RTCM in conventional mode at my repeater to be the interface for > it and Allstar. If I don't remember to keep the PTT held for about a > second after I finish talking, as soon as I release the PTT, I get about > 1 second (it's actually a smidge shorter than that) of the last few things > I said on the air.**** > > I'm pretty sure this *repeat* is because of the approx 1 second delay that > the RTCM instills in the system. It's about 400ms of startup delay, and > about the same of system delays, so the live release of the PTT sees approx > 800ms of delayed audio.**** > > If I remember to keep the PTT pressed for approx 1 second when I finish > talking I don't see this. I'm using a commercial radio, so maybe I'll need > to see about a programmed setting to do that for me automagically.**** > > Just wondering if others are seeing it as well or if I just have a fast > switcher.**** > > Alan**** > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From adamson_alan at hotmail.com Wed Jun 27 01:46:58 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Tue, 26 Jun 2012 21:46:58 -0400 Subject: [App_rpt-users] Repeater Audio? Message-ID: isn't exactly Allstar related, but sorta. I've got a challenge that I'm not sure how to resolve. I think I've said this prior. I've successfully glued an RTCM to a New Icom NXDN repeater. This repeater is running in mixed analog mode and the Allstar is gated to analog only. There is no external controller running other than the RTCM. The internal controller functions when there is a digital signal and that doesn't come across allstar. For now that's an issue I'm willing to accept on that repeater. By using the Disc Out and the Mod in, this setup sounds *awesome*, I'm just blown away at how good it all sounds end to end. I'm about to head down this path on a second repeater, but this one I want to bring up as either Digital only or mixed digital. The controller has the above mentioned Disc out, but that only works with an analog signal. To get *transcoded * audio out, you have to use a pin called AF OUT, it's fixed level, but it's not discriminator, at best it sounds like speaker level. This is the only way to get an intelligent audio signal to feed to allstar when running in digital mode, there is no equivalent of discriminator out when in digital mode. Because I'm using an RTCM, I also can't *process the audio* or at least it's not obvious. And putting that audio back out into the network, it sounds really bad. it's too bassy, and muddy, basically it's de-emphasized and it really needs to be pre-emphasized. Is there any way with an RTCM to tell anything that I've got de-emphasized audio and to help it out? (it really needs some form of low pass put on it and the mid/high frequencies boosted). Also for note, I'm running my RTCM in conventional mode, not voter mode. and I have a CTCSS gate that is valid with COR *AND* CTCSS (in digital in NXDN they call that RAN codes). So I either need to filter between the radio and the RTCM or in the Allstar code if possible. BTW, I really have the same problem coming the other way, FM audio coming from Allstar and being then digitized to NXDN digital (AMBE+2 for those that want to know) *can* sound *really* good, but can also sound really crappy. If the person on the talking end is mumbling, or has a very deep voice, it doesn't sound worth crap, if on the other hand the person has a bright voice and talks clearly, it sounds amazing. This has nothing to do with the *emphasis* of this audio, it's FLAT going into the discriminator, the radio from there handles the transcoding. So, as a start, I'm looking for a relatively easy (and cheap) way to take speaker quality audio from the repeater and put it out *improved* on allstar with a RTCM. Note, with a URI, I could do that, but I don't seem to know how if possible with the RTCM/Voter/Rpt.conf stuff. Anyone faced a similar challenge and found an acceptable approach? I thought about trying one of the CAT audio boards, or maybe building a 3 or 5 band graphic equalizer, but I can't be the only person who's had this issue and solved it? Thanks in advance, and let me know your thoughts. ps. I'm happy to give anyone a demo, just let me know and I'll reconfigure my repeater for digital and show you. I'm testing some analog stuff at the moment, and the new repeater is setting on my floor currently. Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From ea8ee1 at gmail.com Wed Jun 27 13:49:57 2012 From: ea8ee1 at gmail.com (ea8ee) Date: Wed, 27 Jun 2012 13:49:57 +0000 Subject: [App_rpt-users] DMK uri FT8900 help In-Reply-To: References: <4FE72C80.6000505@gmail.com> Message-ID: I Ordered the cable to ke6pcv but the answer arrived with this email is not registered 2012/6/26 Matt Beasant > I seem to remember using my 8900 for a link once and found that the COS > output was exactly that, simply an output from the carrier squelch. > > What I am saying is that the COS output is not subject to CTCSS, so even > if the tone decoder in the 8900 is set up for decode, the COS line still > just follows the carrier squelch. > > Matt > G4RKY > Currently in Alcaniz! > > > On 24 June 2012 16:04, (KP4TR)Ramon Gonzalez wrote: > >> >> The wiring is same as Kenwood TM-D700 and Icom IC880H (i have used both >> radios with same cable wiring as Yaesu 8800) >> >> Go to page 10: >> http://www.yaesu.com/downloadFile.cfm?FileID=754&FileCatID=150&FileName=FT%2D8900R%5FSpanish.pdf&FileContentType=application%2Fpdf >> >> If using URI FOB and COS from radio, use carrierfrom=usb >> >> Make your own cable, or order at http://uricables.com/Yaesu-FT8800R.html >> >> >> >> On 6/24/2012 5:08 AM, ea8ee wrote: >> >> Any info about the wiring to minidin 6pind yaesu ? >> >> >> _______________________________________________ >> App_rpt-users mailing listApp_rpt-users at ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> >> >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dwainegarden at rogers.com Wed Jun 27 17:04:44 2012 From: dwainegarden at rogers.com (Dwaine Garden VE3GIF) Date: Wed, 27 Jun 2012 10:04:44 -0700 (PDT) Subject: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. In-Reply-To: References: Message-ID: <1340816684.67807.YahooMailNeo@web88604.mail.bf1.yahoo.com> This is what I have with my SIP provider. ? I can dial "9" on the pad and get the sip trunk out. exten => _9.,1,1Ringing exten => _9.,2,Dial(SIP/YOUROUTSIDESIPTRUNK/${EXTEN}) exten => _9.,3,Congestion ________________________________ From: Bradley Haney To: Monty Dana Cc: app_rpt-users at ohnosec.org Sent: Monday, June 11, 2012 2:54:43 PM Subject: Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT.. Would anyone know how to intergate this? if you already use? the allstarlink autopatch?? ? OUr club? is using the alltarlink autopatch for 5.00 a month and we would like to add a few SIP/IAX extensions so the Rf users? coudl dial? out on autopatch and then also dial the extension numbers.? Is it possible to have both or would i have to get rid of the allstarlink autopatch? Or is there an easy way to configure it? so if you wanted to dial out on the autopatch you have to do a *6 for autopatch and then lets say? 9 for an? outside line? Bradley On Mon, Jun 11, 2012 at 1:41 PM, Monty Dana wrote: > This is what I used from Keith KF7DRV: > > http://ohnosec.org/pipermail/app_rpt-users/2010-February/000787.html > > Monty > > > On Sat, Jun 9, 2012 at 9:11 PM, Bradley Haney wrote: >> >> Hello all.. ?looked up the great info on getting a ?iax client working >> ?on our repeater.. I can dial our node number now from a IAX client on >> my phone and ? use *99 to tx and # to ?stop ?Tx and listen.. ? ?Now I >> would like to be able to ?"Call" my phone from the repeater. ? We are >> currently using allstarlink's ?Autopatch also.. ?so would i just dial >> *6 and then the extension number i created? >> ?or would i have to do more work ?in the extensions.conf dept. >> >> Thanks for all the help in advance.. >> >> Bradley >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From n6gkj.cm98 at yahoo.com Wed Jun 27 17:16:46 2012 From: n6gkj.cm98 at yahoo.com (Ron Simpson) Date: Wed, 27 Jun 2012 10:16:46 -0700 (PDT) Subject: [App_rpt-users] Audio delay Message-ID: <1340817406.17610.androidMobile@web125906.mail.ne1.yahoo.com> Hey guys, Have been running my nodes for several months now. Several users complain to me that my aux receiver node audio is delayed and an echo is heard when you try to listen to the repeater output when using the aux receiver node. The aux receiver node is co-located with the server. I am running a quad PCI card in my server. My system consist of a full duplex UHF link on node 27936, my aux receiver is on 147.6900 mhz, 27937. Node 27937 is a receive only link to node 27936. Node 27936 is setup as a mode "0" simplex link running full duplex. (No repeat audio). Is there a buffer setting I can change to reduce that delay time? Any help would be appreciated Thanks!! Sent from Yahoo! Mail on Android -------------- next part -------------- An HTML attachment was scrubbed... URL: From adamson_alan at hotmail.com Thu Jun 28 01:07:40 2012 From: adamson_alan at hotmail.com (Alan Adamson) Date: Wed, 27 Jun 2012 21:07:40 -0400 Subject: [App_rpt-users] Repeater Audio? In-Reply-To: <00a901cd5407$8427af70$8c770e50$@hotmail.com> References: <00a901cd5407$8427af70$8c770e50$@hotmail.com> Message-ID: Yeah, Mark to the rescue. My audio problem is solved. There was a nodeemp parameter that I missed on the voter.conf configuration. This means that NXDN digital is up and functional on Allstar via an RTCM :). bet I sound pretty funky too in my best synthesized voice :). If you want to hear it. Node 28656 is setting here on my floor, no duplexer and hooked to a dummy load and my service monitor :). I'll be playing with a Beaglebone and carrying an HT so I can listen to the system for a while. I'll leave that node down off my normal hookup so it's just an island. I can hook it to my remote base if you want to hear A vs. B. Levels were set with analog, so no promises of what they might be on digital, but I suspect they will be very close. Alan From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Alan Adamson Sent: Tuesday, June 26, 2012 9:47 PM To: app_rpt-users at ohnosec.org Subject: [App_rpt-users] Repeater Audio? isn't exactly Allstar related, but sorta. I've got a challenge that I'm not sure how to resolve. I think I've said this prior. I've successfully glued an RTCM to a New Icom NXDN repeater. This repeater is running in mixed analog mode and the Allstar is gated to analog only. There is no external controller running other than the RTCM. The internal controller functions when there is a digital signal and that doesn't come across allstar. For now that's an issue I'm willing to accept on that repeater. By using the Disc Out and the Mod in, this setup sounds *awesome*, I'm just blown away at how good it all sounds end to end. I'm about to head down this path on a second repeater, but this one I want to bring up as either Digital only or mixed digital. The controller has the above mentioned Disc out, but that only works with an analog signal. To get *transcoded * audio out, you have to use a pin called AF OUT, it's fixed level, but it's not discriminator, at best it sounds like speaker level. This is the only way to get an intelligent audio signal to feed to allstar when running in digital mode, there is no equivalent of discriminator out when in digital mode. Because I'm using an RTCM, I also can't *process the audio* or at least it's not obvious. And putting that audio back out into the network, it sounds really bad. it's too bassy, and muddy, basically it's de-emphasized and it really needs to be pre-emphasized. Is there any way with an RTCM to tell anything that I've got de-emphasized audio and to help it out? (it really needs some form of low pass put on it and the mid/high frequencies boosted). Also for note, I'm running my RTCM in conventional mode, not voter mode. and I have a CTCSS gate that is valid with COR *AND* CTCSS (in digital in NXDN they call that RAN codes). So I either need to filter between the radio and the RTCM or in the Allstar code if possible. BTW, I really have the same problem coming the other way, FM audio coming from Allstar and being then digitized to NXDN digital (AMBE+2 for those that want to know) *can* sound *really* good, but can also sound really crappy. If the person on the talking end is mumbling, or has a very deep voice, it doesn't sound worth crap, if on the other hand the person has a bright voice and talks clearly, it sounds amazing. This has nothing to do with the *emphasis* of this audio, it's FLAT going into the discriminator, the radio from there handles the transcoding. So, as a start, I'm looking for a relatively easy (and cheap) way to take speaker quality audio from the repeater and put it out *improved* on allstar with a RTCM. Note, with a URI, I could do that, but I don't seem to know how if possible with the RTCM/Voter/Rpt.conf stuff. Anyone faced a similar challenge and found an acceptable approach? I thought about trying one of the CAT audio boards, or maybe building a 3 or 5 band graphic equalizer, but I can't be the only person who's had this issue and solved it? Thanks in advance, and let me know your thoughts. ps. I'm happy to give anyone a demo, just let me know and I'll reconfigure my repeater for digital and show you. I'm testing some analog stuff at the moment, and the new repeater is setting on my floor currently. Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From ea8ee1 at gmail.com Thu Jun 28 07:28:53 2012 From: ea8ee1 at gmail.com (ea8ee) Date: Thu, 28 Jun 2012 07:28:53 +0000 Subject: [App_rpt-users] DMK uri FT8900 help In-Reply-To: <1340805889.59630.androidMobile@web160704.mail.bf1.yahoo.com> References: <1340805889.59630.androidMobile@web160704.mail.bf1.yahoo.com> Message-ID: the email ke6pcv from website uricable refused the order 2012/6/27 Eric Harrison > That being the case you can still use the dsp to detect ctcss. Providing > your audio coming from the 8900 will pass ctcss. > > Eric > > Sent from Yahoo! Mail on Android > > ------------------------------ > * From: * ea8ee ; > * To: * Matt Beasant ; > * Cc: * ; > * Subject: * Re: [App_rpt-users] DMK uri FT8900 help > * Sent: * Wed, Jun 27, 2012 1:49:57 PM > > I Ordered the cable to ke6pcv but the answer arrived with this email is > not registered > > 2012/6/26 Matt Beasant > >> I seem to remember using my 8900 for a link once and found that the COS >> output was exactly that, simply an output from the carrier squelch. >> >> What I am saying is that the COS output is not subject to CTCSS, so even >> if the tone decoder in the 8900 is set up for decode, the COS line still >> just follows the carrier squelch. >> >> Matt >> G4RKY >> Currently in Alcaniz! >> >> >> On 24 June 2012 16:04, (KP4TR)Ramon Gonzalez wrote: >> >>> >>> The wiring is same as Kenwood TM-D700 and Icom IC880H (i have used both >>> radios with same cable wiring as Yaesu 8800) >>> >>> Go to page 10: >>> http://www.yaesu.com/downloadFile.cfm?FileID=754&FileCatID=150&FileName=FT%2D8900R%5FSpanish.pdf&FileContentType=application%2Fpdf >>> >>> If using URI FOB and COS from radio, use carrierfrom=usb >>> >>> Make your own cable, or order at http://uricables.com/Yaesu-FT8800R.html >>> >>> >>> >>> On 6/24/2012 5:08 AM, ea8ee wrote: >>> >>> Any info about the wiring to minidin 6pind yaesu ? >>> >>> >>> _______________________________________________ >>> App_rpt-users mailing listApp_rpt-users at ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> >>> >>> >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users at ohnosec.org >>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From w9drr.ham at gmail.com Fri Jun 29 16:45:56 2012 From: w9drr.ham at gmail.com (Don Russell) Date: Fri, 29 Jun 2012 11:45:56 -0500 Subject: [App_rpt-users] For Thunderbolt GPS users Message-ID: http://www.ke5fx.com/heather/readme.htm New version of Lady Heather is out. That is a nice monitoring/control program for them. -- Don Russell, CBRE CBNT W9DRR - ARRL OES, Technical Specialist http://www.socialengineer.us From telesistant at hotmail.com Fri Jun 29 17:19:56 2012 From: telesistant at hotmail.com (Jim Duuuude) Date: Fri, 29 Jun 2012 10:19:56 -0700 Subject: [App_rpt-users] For Thunderbolt GPS users In-Reply-To: References: Message-ID: oooo.. whip me, beat me, make me keep accurate time... :-) > Date: Fri, 29 Jun 2012 11:45:56 -0500 > From: w9drr.ham at gmail.com > To: app_rpt-users at ohnosec.org > Subject: [App_rpt-users] For Thunderbolt GPS users > > http://www.ke5fx.com/heather/readme.htm > > New version of Lady Heather is out. That is a nice monitoring/control > program for them. > > > -- > Don Russell, CBRE CBNT > W9DRR - ARRL OES, Technical Specialist > http://www.socialengineer.us > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From bdboyle at bdboyle.com Fri Jun 29 18:35:52 2012 From: bdboyle at bdboyle.com (Bryan D. Boyle) Date: Fri, 29 Jun 2012 14:35:52 -0400 Subject: [App_rpt-users] For Thunderbolt GPS users In-Reply-To: References: Message-ID: <4FEDF588.4030002@bdboyle.com> On 6/29/12 1:19 PM, Jim Duuuude wrote: > > oooo.. whip me, beat me, make me keep accurate time... :-) > If you insist...;) -- Bryan In this world, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant. You may quote me. Sent from my MacBook Pro. From telesistant at hotmail.com Fri Jun 29 22:27:25 2012 From: telesistant at hotmail.com (Jim Duuuude) Date: Fri, 29 Jun 2012 15:27:25 -0700 Subject: [App_rpt-users] For Thunderbolt GPS users In-Reply-To: <4FEDF588.4030002@bdboyle.com> References: , , <4FEDF588.4030002@bdboyle.com> Message-ID: cmon... if you *really* wanted to be funny you should have said... NO! :-) > Date: Fri, 29 Jun 2012 14:35:52 -0400 > From: bdboyle at bdboyle.com > To: app_rpt-users at ohnosec.org > Subject: Re: [App_rpt-users] For Thunderbolt GPS users > > On 6/29/12 1:19 PM, Jim Duuuude wrote: > > > > oooo.. whip me, beat me, make me keep accurate time... :-) > > > > If you insist...;) > > -- > Bryan > In this world, you must be oh so smart or oh so pleasant. > Well, for years I was smart. I recommend pleasant. > You may quote me. > > Sent from my MacBook Pro. > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From w7ry at centurytel.net Sat Jun 30 20:17:31 2012 From: w7ry at centurytel.net (Jim W7RY) Date: Sat, 30 Jun 2012 13:17:31 -0700 Subject: [App_rpt-users] IC Node Message-ID: <8881F769B8F9473EB59AA5476DB72590@JimsLaptop> Does anyone remember who was selling the ?IC NODE? ? It was an IRLP box that I want to convert to a Allstar node. I cant seem to find the persons name or call. He was in the mid-west somewhere. Thanks! 73 Jim W7RY -------------- next part -------------- An HTML attachment was scrubbed... URL: