[App_rpt-users] Looking for a hardwired rpt.conf section

[Neal Garbenis]

If you don't want to here the connect and disconnect messages you'll need to turn telemetry off.  If I recall you can do that with a cop command

Neal Garbenis Jr.
NG8Y

 

On Jun 1, 2012, at 12:19 AM, Tim Sawyer <tim.sawyer at me.com> wrote:

> duplex = 0         ; Half duplex with no telemetry, courtesy tones or hang time 
> linktolink = yes  ; in case whatever you're hooking to likes full duplex
> 
> ; these attempt to kill IDs but I have no idea if they would work. experiment!
> totime=0
> idrecording=|i
> idtalkover=|i
> 
> Can't think of anything else you have to stop at the moment. Maybe others will chime in.
> --
> Tim
> :wq
> 
> On May 31, 2012, at 7:47 PM, Alan Adamson wrote:
> 
>> I want to create a completely tone(s) less connection on a uri.  It’s a hardwired connection that I don't want ID's, announcements, hangtime, CT's etc… Besides using the duplex=0, what else do I need to do to turn all of that off on that node? 
>> 
>> If you have rpt.conf section that you could share it would be appreciated.
>> 
>> 
>> Thanks
>> 
>> Alan
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20120601/a21d3ea1/attachment.html>