[App_rpt-users] Double ID's

[Tony KT9AC]

It's been like this for a while now (check the archives). Just comment out the "talkover" one.

--- On Fri, 6/8/12, Buddy Brannan <buddy at brannan.name> wrote:

> From: Buddy Brannan <buddy at brannan.name>
> Subject: Re: [App_rpt-users] Double ID's
> To: "app_rpt mailing list" <App_rpt-users at ohnosec.org>
> Date: Friday, June 8, 2012, 11:38 AM
> This is a sort of long-standing
> thing, I'm also still seeing it. You'll get the talk over ID
> folioed by the regular ID, though not every time. 
> --
> Buddy Brannan, KB5ELV - Erie, PA
> Phone: (814) 860-3194 or 888-75-BUDDY
> 
> 
> 
> On Jun 8, 2012, at 12:16 PM, Alan Adamson <adamson_alan at hotmail.com>
> wrote:
> 
> > HMM…
> > 
> > NOTE, I've recently updated to the latest svn and since
> then noticed this…
> > 
> > Anyone noticed that on an initial ID after setting idle
> for some time, when you have 2 nodes connected.  When a
> signal comes in on the remote node, it causes the local node
> to start the ID, about 2/3 through, it cuts off the first
> one and immediately generates a second as if it were one
> complete ID.
> > 
> > 
> > Doesn't do it all the time… ….
> > 
> > Any idea what change in the code may have done this?
> > 
> > Alan
> > 
> > 
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>