[App_rpt-users] Repeater Issue

[Scott Weis]

Recompile zaptel. Your kernel was updated, and as such a reinstall of zaptel
is needed. If you are running yum to update your system you should add a
line like exclude=kernel* and remove that line only when prepared to
recompile zaptel.

-----Original Message-----
From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Travis Best
Sent: Monday, June 11, 2012 11:50 PM
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] Repeater Issue

Is there anyone that can help me my node wont start keeps give me the
following issues


[Jun 11 23:47:55] NOTICE[6101] app_rpt.c: RPT thread restarted on 28168
[Jun 11 23:47:55] WARNING[6101] app_rpt.c: rpt_thread restarted on node 
28168
[Jun 11 23:47:55] NOTICE[6101] app_rpt.c: RPT thread restarted on 28169
[Jun 11 23:47:55] WARNING[6101] app_rpt.c: rpt_thread restarted on node 
28169
[Jun 11 23:47:55] WARNING[6133] channel.c: No channel type registered 
for 'Zap'
[Jun 11 23:47:55] WARNING[6134] channel.c: No channel type registered 
for 'Zap'
[Jun 11 23:47:55] WARNING[6136] chan_usbradio.c: Loaded parameters from 
usbradio_tune_usb28169.conf for device usb28169 .
[Jun 11 23:47:57] NOTICE[6101] app_rpt.c: RPT thread restarted on 28168
[Jun 11 23:47:57] WARNING[6101] app_rpt.c: rpt_thread restarted on node 
28168
[Jun 11 23:47:57] NOTICE[6101] app_rpt.c: RPT thread restarted on 28169
[Jun 11 23:47:57] WARNING[6101] app_rpt.c: rpt_thread restarted on node 
28169
[Jun 11 23:47:57] WARNING[6152] channel.c: No channel type registered 
for 'Zap'
[Jun 11 23:47:57] WARNING[6153] channel.c: No channel type registered 
for 'Zap'
[Jun 11 23:47:59] NOTICE[6101] app_rpt.c: RPT thread restarted on 28168
[Jun 11 23:47:59] WARNING[6101] app_rpt.c: rpt_thread restarted on node 
28168


     1. You only have to compile Zaptel support into Asterisk if you 
need 
it.

One option is to recompile without Zaptel support.
         2. You only have to load Zaptel drivers if you want to take 
advantage 
of

Zaptel services.  One option is to unload zaptel modules if you don't 
need 
them

.
         3. If you need Zaptel services, you must correctly configure 
Zaptel.
[Jun 10 23:29:52] ERROR[6124] asterisk.c: Asterisk has detected a 
problem with 
y

our Zaptel configuration and will shutdown for your protection.  You 
have 
option

s:
         1. You only have to compile Zaptel support into Asterisk if you 
need 
it.

One option is to recompile without Zaptel support.
         2. You only have to load Zaptel drivers if you want to take 
advantage 
of

Zaptel services.  One option is to unload zaptel modules if you don't 
need 
them

.
         3. If you need Zaptel services, you must correctly configure 
Zaptel.
[Jun 10 23:29:53] ERROR[6131] asterisk.c: Asterisk has detected a 
problem with 
y

our Zaptel configuration and will shutdown for your protection.  You 
have 
option

s:


Anyone have any ideas????  Just started out of the blue