[App_rpt-users] Parallel Port manipulation when using Quad PCI Card

[David KE6UPI]

Sorry Ron I have been every busy.

This is from a post sometime ago.

921=cop,61,GPIO1=1            ; Turn on GPIO 1
920=cop,61,GPIO1=0            ; Turn off GPIO 1

This should give you some idea. Search the email post for "GPIO"


David


On Tue, Mar 27, 2012 at 4:22 PM, Ron Simpson <n6gkj.cm98 at yahoo.com> wrote:

> Hey Guys!,
>
> I am looking to use the Parallel Port to control some hardware funtions on
> my node, I am using the Quad PCi card, I am looking for the command string
> to do this. Has anyone done this with a Quad Card and maybe point me in the
> right direction?
>
> Thanks!!
>
> Ron Simpson,
> N6GKJ Amateur Radio
> ...................
>
> Have you ever noticed that when you are looking for something,
> it is always found in the last place you look?
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20120327/c0ada157/attachment.html>