[App_rpt-users] SIP smart phone client

[Jeffrey S. Carrier]

Ok, 
 
I've found the post (copied below) I was looking for but I'm still
messing with this and I don't seem to be making any progress.  I may
have something amiss in either sip.conf or extensions.conf?  Is there a
good tutorial for asterisk/centos challenged users like myself?
 
 
 
in your Asterisk Dialplan, you need to invoke Rpt like this:
 
exten => Something,1,rpt,1234|P   (for Phone with function controlled
PTT)
 
-or-
 
exten => Something,1,rpt,1234|Pv (for Voice-controlled PTT)
 
(examples given for node number 1234)
 
JIM WB6NIL
 
> Date: Sat, 14 Jan 2012 13:16:33 -0500
> From: wolthui3 at msu.edu
<http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> 
> To: app_rpt-users at ohnosec.org
<http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> 
> Subject: Re: [App_rpt-users] Softphone to the repeater Ports...
> 
> I would like to do this also.  Is there a document somewhere that
shows 
> how to set it up for private LAN or for direct connection from a SIP 
> trunk?  I would like to tie my local Asterisk phone system into my 
> repeater, but not sure on the setup for the Allstar side.
> 
> Mike
> kb8zgl
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
<http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> 
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
                                        
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://ohnosec.org/pipermail/app_rpt-users/attachments/20120114/d60aafa
9/attachment.html>

 

 

________________________________

From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Jeffrey S.
Carrier
Sent: Tuesday, May 08, 2012 6:40 PM
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] SIP smart phone client

 

I know I've seen this before but I can't locate it after searching for
nearly an hour.  The question; which android sip client is "best" with
app_rpt and can anyone advise on the setup required on the allstar
server?  Again, I apologize but I can't seem to locate the original post
anywhere.

 

73 de K0JSC

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20120508/f21951c4/attachment.html>