[App_rpt-users] courtesy tone issue when linked

[Scott Weis]

It would appear the telemetry= is not implemented in the code.  So there can
be only one [telemetry] stanza.

-----Original Message-----
From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Sione Ragle
Sent: Thursday, May 24, 2012 11:45 PM
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] courtesy tone issue when linked


I am struggling trying to figure this out.

I have 2 repeaters on the same box, and each one of the have a unique
courtesy tone. But when I link them, they loose that courtesy tone and start
using remotetx which makes it so both repeaters have the same CT. 
So I went in to the rpt.conf file and under the nodes I change
"telemetry=telemetry1" for node 1 and "telemetry=telemetry2" for node 2.
Then under "[telemetry1]" I define a diffrent remotetx ct. but that did not
work. It seems that the line "telemetry=telemetry1" does not work.

Thanks
--Sione



_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users