[App_rpt-users] Node cannot connect

[FERNANDO VILLARROEL]

Dear.

I have a ACID succesfully installed with URI connected to Motorola GM300

I cannot connect my local node (1999) to my ACID server.

If i run:

test*CLI> radio tune rxnoise
tune rxnoise maxtries=12, target=27000, tolerance=2750
tries=0, setting=2, meas=7336
tries=1, setting=7, meas=17695
tries=2, setting=11, meas=26213
tries=3, setting=11, meas=25994
tries=4, setting=11, meas=26186
tries=5, setting=11, meas=26213
tries=6, setting=11, meas=26186
DONE tries=6, setting=688, meas=26186, sqnoise=0
INFO: RX INPUT ADJUST SUCCESS.


test*CLI> radio tune rxvoice
INFO: RX VOICE ADJUST START.
target=7200 tolerance=360
tries=0, setting=1.000000, meas=27537
tries=1, setting=0.261466, meas=7468
tries=2, setting=0.252083, meas=7586
tries=3, setting=0.239256, meas=7164
tries=4, setting=0.239256, meas=6969
tries=5, setting=0.239256, meas=6558
tries=6, setting=0.262679, meas=6628
tries=7, setting=0.285348, meas=8243
tries=8, setting=0.249242, meas=7582
tries=9, setting=0.236685, meas=6607
tries=10, setting=0.257928, meas=7100
DONE tries=10, setting=0.257928, meas=7100.000000
INFO: RX VOICE GAIN ADJUST SUCCESS.


test*CLI> radio tune rxtone
INFO: RX CTCSS ADJUST START.
target=2400 tolerance=100
tries=0, setting=1.000000, meas=6244
tries=1, setting=0.384369, meas=2587
tries=2, setting=0.356585, meas=2628
tries=3, setting=0.325648, meas=1980
tries=4, setting=0.394725, meas=2555
tries=5, setting=0.370779, meas=2191
tries=6, setting=0.406148, meas=2456
DONE tries=6, setting=0.406148, meas=2456.00
INFO: RX CTCSS GAIN ADJUST SUCCESS.


But when i run:

test*CLI> rpt nodes 1999
test*CLI>
************************* CONNECTED NODES *************************

<NONE>LI>

test*CLI>


Any idea what i am doing wrong or how i can solve this issue?

Regards