[App_rpt-users] Tone Levels

[Ken]

I assume you mean the Morse ID?

That would be in the Morse stanza.

 

; Morse code parameters, these are common to all repeaters.

;

;

[morse]

;

speed=22                           ; Approximate speed in WPM

frequency=800                      ; Morse Telemetry Frequency

amplitude=4096                     ; Morse Telemetry Amplitude

idfrequency=880                    ; Morse ID Frequency 

idamplitude=1024                   ; Morse ID Amplitude

 

 

 

As far as PL goes, that is set when you do the audio calibration routine
(radio tune txtone).

 

73

 

Ken

 

 

 

 

From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Jim W7RY
Sent: Friday, November 16, 2012 8:38 PM
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] Tone Levels

 

Is there a separate setting for the identifier level?  What command controls
it.  Does this level also control the PL transmit level?

 

Thanks!

73

Jim W7RY

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20121116/bd3725f0/attachment.html>