[App_rpt-users] Receive Adjustment Failed

[Jim W7RY]

Also, what is the parameter for?

rxnoisefiltype=0

I don’t see it anywhere in the documentation.

Thanks again!
73
Jim W7RY


From: Jim W7RY 
Sent: Friday, November 16, 2012 8:29 PM
To: app_rpt-users at ohnosec.org 
Subject: [App_rpt-users] Receive Adjustment Failed

Any idea guys?
I tried rxboost=1 and rxboots=0 and same results.  I know there is audio at the receive input because I have good quality repeater audio. But have a long squelch burst on dekay of the subscriber. 

This is a modified CM108 USB fob. 


Thanks for all the great help!
73
Jim W7RY



Please enter your selection now: 2
tune rxnoise maxtries=12, target=27000, tolerance=2750
tries=0, setting=2, meas=32767
tries=1, setting=2, meas=32767
tries=2, setting=2, meas=32767
tries=3, setting=2, meas=32767
tries=4, setting=1, meas=32767
tries=5, setting=1, meas=32767
tries=6, setting=1, meas=32767
tries=7, setting=1, meas=32767
tries=8, setting=1, meas=32767
tries=9, setting=1, meas=32767
tries=10, setting=1, meas=32767
tries=11, setting=1, meas=32767
DONE tries=12, setting=63, meas=32767, sqnoise=13206
ERROR: RX INPUT ADJUST FAILED.


--------------------------------------------------------------------------------
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20121116/78035f46/attachment.html>