[App_rpt-users] mpg123: no process killed - Asterisk endedwith exit status 1

[Lu Vencl]

I don't have Jim's email in this phone and I am traveling this weekend. Can someone fwd this concern to him? Unless of course he is monitoring this list then that would not be necessary. 
Thanks
Lu
KA4EPS

Sent from my iPhone, Lu Vencl

On Oct 6, 2012, at 1:44 AM, "Steve Agee" <n5zua at earthlink.net> wrote:

> I'm having this issue as well on a fresh install. The machine is 64 bit:
>  
> [Oct  5 22:42:47] ERROR[23279] asterisk.c: Asterisk has detected a problem with your Zaptel configuration and will shutdown for your protection.  You have options:
>         1. You only have to compile Zaptel support into Asterisk if you need it.  One option is to recompile without Zaptel support.
>         2. You only have to load Zaptel drivers if you want to take advantage of Zaptel services.  One option is to unload zaptel modules if you don't need them.
>         3. If you need Zaptel services, you must correctly configure Zaptel.
> mpg123: no process killed
> Asterisk ended with exit status 1
> Asterisk died with code 1.
> Automatically restarting Asterisk.
>  
> N5ZUA
> 
> ----- Original Message -----
> From: Scott Weis
> To: 'Lu Vencl' ; app_rpt-users at ohnosec.org
> Sent: Friday, October 05, 2012 9:23 PM
> Subject: Re: [App_rpt-users] mpg123: no process killed - Asterisk endedwith exit status 1
> 
> Your system most likely updated it’s kernel.. So you need to rebuild/install    zaptel.
>  
> From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Lu Vencl
> Sent: Friday, October 05, 2012 9:42 PM
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] mpg123: no process killed - Asterisk ended with exit status 1
>  
> Anyone know why a new node I just built goes through several of these before settling down after a reboot?
> I have hear this complaint from someone else before, but he can’t remember what he did to fix his node.
> Thanks
> Lu
> KA4EPS
>  
> Automatically restarting Asterisk.
> mpg123: no process killed
> Asterisk ended with exit status 1
> Asterisk died with code 1.
> Automatically restarting Asterisk.
> mpg123: no process killed
> Asterisk ended with exit status 1
> Asterisk died with code 1.
> Automatically restarting Asterisk.
> mpg123: no process killed
> Asterisk ended with exit status 1
> Asterisk died with code 1.
> Automatically restarting Asterisk.
> mpg123: no process killed
> Asterisk ended with exit status 1
> Asterisk died with code 1.
> Automatically restarting Asterisk.
> mpg123: no process killed
> Asterisk ended with exit status 1
> Asterisk died with code 1.
> Automatically restarting Asterisk.
> mpg123: no process killed
> Asterisk ended with exit status 1
> Asterisk died with code 1.
> Automatically restarting Asterisk.
> mpg123: no process killed
> Asterisk ended with exit status 1
> Asterisk died with code 1.
> Automatically restarting Asterisk.
> mpg123: no process killed
> Asterisk ended with exit status 1
> Asterisk died with code 1.
> Automatically restarting Asterisk.
> mpg123: no process killed
> Asterisk ended with exit status 1
> Asterisk died with code 1.
> Automatically restarting Asterisk.
> mpg123: no process killed
> Asterisk ended with exit status 1
> Asterisk died with code 1.
> Automatically restarting Asterisk.
> mpg123: no process killed
> Asterisk ended with exit status 1
> Asterisk died with code 1.
> Automatically restarting Asterisk.
> mpg123: no process killed
> Asterisk ended with exit status 1
> Asterisk died with code 1.
> Automatically restarting Asterisk.
> mpg123: no process killed
> Asterisk ended with exit status 1
> Asterisk died with code 1.
> Automatically restarting Asterisk.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20121007/c0f03551/attachment.html>