[App_rpt-users] Don't have much hair left.

[Jeff Carrier]

>From the console on your server enter nodesetup.sh that should download the
info from the web portal.  That being said, I can't remember if there is a
way to set up an rtcm via the portal.

73 de k0jsc
On Apr 2, 2013 10:57 PM, "R.K." <vk3ant at optusnet.com.au> wrote:

>
> Hello group,
>
> Name is Ron, VK3ANT from Melbourne, Australia.
>
> I am new to the group so please take it easy on me when I goof up here
>
> I set up a AllStar server and a node here at home, well I didn’t do much,
> a chap ( Tony )  in Arkansas did most of it and it was working pretty well
> until a few days ago. One thing he couldn’t get going was the time and
> there was an issue with the status page where my node ( 28467 ) could not
> be seen.
>
> Anyway, he sent me some info to try a few things and well, you guessed it,
> I muffed the server, you might say I murdered it, now I have nothing.
>
> I am using an RTCM here ( well I was ) and all was working pretty well as
> I said. I have never messed around with the Linux system and hence I
> was/are very unfamiliar playing with it. Tony, being a guru knew what he
> was doing and so when he configured my server he did so manually and
> outside the AllStar Portal.
>
> Now that all that configuration has gone, well I am “trying” ( read hair
> pulling ) to reconfigure my server within the pages of the portal, but when
> I download the information it just gives me all these hundreds of error
> messages.
>
> I ran the Acid disc over my server PC again which takes about an hour, I
> don’t have a static IP address so when it asked the question, I answered
> “N”, it goes through quite a process until it gives me more questions
> wanting my Portal Log In and Password, continues with the server config for
> a while longer and finally comes to the “ test login “ page.
>
> To this point I figured I was going OK. Back in the Portal now and I
> created and submitted the server details, got the reply of Congratulations
> ...etc. then I continue to fill in the pages as required and submitting
> them at the end of the process. After all that I try to download the server
> information, click the “initiate” button, then I see nothing, not a thing
> happens. I can leave things running all night and when I get up in the
> morning, still nothing.
>
> Where I am thinking my problem lies is that Tony set the server up
> manually, and I have read somewhere on the portal pages that I am now not
> able to reconfigure the server from the portal pages, is this correct, if
> so, am I able to delete my old server information from the main AllStar
> server itself then setup a whole new server using the setup pages on the
> Portal ?
>
> Getting to be a little bit desperate here as, like I say, it takes a good
> hour to set up the server each time I run the Acid disc over it again, so I
> am now trying to not have to do that again. Can any of you guys give me any
> information where things are going wrong or maybe point me toward a page
> that I can read about it.
>
> Thanks people.
>
> 73
> de Ron.
> VK3ANT
>
>
>
>
>
>
> =======
> Email scanned by PC Tools - No viruses or spyware found.
> (Email Guard: 9.0.0.2308, Virus/Spyware Database: 6.21080)
> http://www.pctools.com<http://www.pctools.com/?cclick=EmailFooterClean_51>
> =======
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130403/44d46c6e/attachment.html>