[App_rpt-users] Voter Question

Tim Sawyer tim.sawyer at me.com
Sat Apr 20 03:27:19 UTC 2013


Yes, ACID is the distro that is used with RTCM voting. The difference between a URI and a RTCM set up is minimal. Only one line in rpt.conf needs to be changed.  One file, voter.conf is added to the ACID config. That's the entire difference. There is an example voter.conf here: http://ohnosec.org/drupal/node/180. Complete RTCM documentation is available from the micro-node site here: http://206.212.254.21/unode_docs/rtcm_%20manual.pdf

--
Tim
:wq

On Apr 19, 2013, at 6:37 PM, Corey Dean <n3fe at repeater.net> wrote:

> Hopefully this will change the subject at hand...
> 
> I was reading about the acid voters and had a question or more.
> 
> I currently run the voting in Zipar so I am not familiar with the way the voter works in the ACID distro.  I am trying to understand a few thing in ACID to help a friend.  I have seen the rtcm that will act as a voting interface as well as the voting card.  Can a regular acid install on a computer be used as a voter as well?  If so is their any documentation for this?  I know a GPS could be connected up to the computer and a radio with true discriminator audio should do the job.  I am just curious if the computer with the ACID distro can also be used as a voter with the right configuration.
> 
> Corey  N3FE
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users




More information about the App_rpt-users mailing list