[App_rpt-users] usb fobs lights out....

[Ramesh Dhami, VA3UV/M]

To close the loop on this - I installed a new PCI based USB card into the box and connected the fobs to it - booted up - Voila!

So the onboard USB ports seem to be damaged somehow!

LEDs are flashing away, life is good once again, snow is still falling in Toronto!

Cheers,

Ramesh.

Sent on the TELUS Mobility network with BlackBerry

-----Original Message-----
From: "Ramesh Dhami (VA3UV)" <Ramesh at va3uv.com>
Sender: app_rpt-users-bounces at ohnosec.org
Date: Thu, 18 Apr 2013 11:13:03 
To: app_rpt<app_rpt-users at ohnosec.org>
Subject: [App_rpt-users] usb fobs lights out....

Hi All;

I noticed last night that my app_rpt box with 3 fobs (the LEDs on which 
usually flash away), all had lights out yesterday.

Interestingly, when I do an 'lsusb' - I don't see them:

[root at ve3rsd-ast ~]# lsusb
Bus 002 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
[root at ve3rsd-ast ~]#



The USB controllers seem to be there:

[root at ve3rsd-ast ~]# lspci | grep USB
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI 
Controller #1 (rev 01)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI 
Controller #2 (rev 01)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI 
Controller #3 (rev 01)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI 
Controller #4 (rev 01)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI 
Controller (rev 01)


dmesg lists them too...

[root at ve3rsd-ast ~]# dmesg | grep USB
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
hub 5-0:1.0: USB hub found


I recall having an issue like this on my D-STAR box some time ago... a 
yum update fixed it (I think it was an issue with udev.... not sure) - I 
have done a 'yum update' on this box and I'm no further ahead.


Environment specifics:

[root at ve3rsd-ast ~]# cat /etc/*release*
cat: /etc/lsb-release.d: Is a directory
CentOS release 5.9 (Final)
[root at ve3rsd-ast ~]#
[root at ve3rsd-ast ~]# uname -r
2.6.18-308.8.2.el5



Anyone have any ideas?

Thx,

Ramesh.



_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users