[App_rpt-users] Question Regarding My Node Connectivity

[Ramesh Dhami]

Sounds like the system may be configured for full duplex, with a single radio attached (more than likely for a simplex application).

Check the duplex value in rpt.conf

Ramesh.

Sent from my iPhone

On 2013-08-07, at 2:56 PM, pete M <petem001 at hotmail.com> wrote:

> what radio are you using for your test, receiver and transmiter. 
> 
> did you do the audio level tuning?
> 
> are you using radio usb or simple usb?
> 
> 
> 
> Envoyé de mon iPad
> 
> Le 2013-08-07 à 14:35, "David Dean" <david at k0pwo.com> a écrit :
> 
>> Hello to the group.
>> 
>> I am working on my first node and I am unable to make a connection to another node using my radio. I am able to connect to other nodes when using the CLI without problem. But when using the keypad on a radio I get nothing.
>> 
>> When transmitting tones on a radio keypad and watching the CLI instead of seeing the coorect dtmf tone I see the following message
>> 
>> "-- Hungup 'Zap/pseudo-879579846'
>> -- Hungup 'Zap/pseduo-1210393799'
>> -- Hungup 'Zap/pseduo-441974974'
>> 
>> And that is it.
>> 
>> Can someone tell me if I have a file that is messed up, missing or possibly it is my host radio connected to the node.
>> 
>> Thanks,
>> 
>> David
>> -- 
>> David Dean, K0PWO Arapahoe County, Colorado (720) 350-2053 cell
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users