[App_rpt-users] RTCM simulcast help

[Jim Duuuude]

well, why dont you try something higher then 480...

Date: Sun, 11 Aug 2013 20:37:49 -0500
Subject: Re: [App_rpt-users] RTCM simulcast help
From: mhebert1975 at gmail.com
To: telesistant at hotmail.com
CC: app_rpt-users at ohnosec.org

1) S/W Version: 1.26 08/10/2013 on both of them
2) 480 on both of them

On Sun, Aug 11, 2013 at 8:34 PM, Jim Duuuude <telesistant at hotmail.com> wrote:




1) What version of RTCM firmware are you running?

2) What do you have your TxBufferLength set to (in the RTCM) ?

Jim

Date: Sun, 11 Aug 2013 19:43:36 -0500
From: mhebert1975 at gmail.com

To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] RTCM simulcast help

All,
I am trying to enable simulcast on my system. I have gone into the voter.conf and added the "transmit" statement. The 2nd repeater is not transmitting. I am using menu 98 and do not see the "PTT : 0" changing to 1 or the red TX indicator lighting up 


I have done a astres.sh and rebooted both RTCMs
Here is my voter.conf
[general]port = 667buflen = 120password = xxx


[28304]KD5DFB_main=xxx,transmit,masterKD5DFB_site1=xxx,transmit

Here is my menu 98 on the RTCM 
GPS Lock: 1

Connected: 1COR: 1EXT CTCSS IN: 0PTT: 0RSSI: 255Current Samples / Sec.: 8000Current Peak Audio Level: 1496Squelch Noise Gain Value: 21, Diode Cal. Value: 36, SQL pot 134

Current Time: Mon  Aug 12, 2013  00:40:50.800Last Rx Pkt System time: 08/12/2013 00:40:50.800, diff: 0 msecLast Rx Pkt Timestamp time: 08/12/2013 00:40:50.780, diff: 20 msecLast Rx Pkt index: 0, inbounds: 0




_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users 		 	   		  

 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130811/50a9f4f3/attachment.html>