[App_rpt-users] RTCM simulcast help

Tue Aug 13 16:41:37 UTC 2013

Chuck,

Set the buflen to 1000 and both of the rtcms to 3000. still not working.

Mike

On Mon, Aug 12, 2013 at 12:06 AM, Chuck Henderson <
rpt2 at chuck.midlandsnetworking.com> wrote:

> in  voter.conf, set bufflen higher like this, then reload.  After it
> is working you can always trim the value down a little at a time till
> it quits working, then increase it about 40 from that. Menu 18 should
> be 0. works here.
>
> port = 667
> ; buflen = 120 min value that works at all
> buflen = 400
>
>
> On Sun, Aug 11, 2013 at 11:21 PM, Michael Hebert <mhebert1975 at gmail.com>
> wrote:
> > I know, really weird. If i just change client 2 rtcm menu item 18=0 it
> will
> > start transmitting and it is still voting.
> >
> >
> > On Sun, Aug 11, 2013 at 11:16 PM, Tim Sawyer <tim.sawyer at me.com> wrote:
> >>
> >> That's weird, so only the master transmits. Hmmmm...
> >>
> >> what happens when you do *CLI>voter display 28304? Are they both there?
> >>
> >> You do have different passwords for each client, right?
> >> --
> >> Tim
> >> :wq
> >>
> >> On Aug 11, 2013, at 9:11 PM, Michael Hebert <mhebert1975 at gmail.com>
> wrote:
> >>
> >> Yes, I have 2 clients and the first 1 is transmitting. What is also
> >> interesting is client 2 will transmit telemetry. ie CW ID, anything
> using
> >> rpt fun 28304 like COP 4
> >>
> >> [28304]
> >> KD5DFB_main=xxx,transmit,master
> >> KD5DFB_site1=xxx,transmit
> >>
> >>
> >> On Sun, Aug 11, 2013 at 10:58 PM, Tim Sawyer <tim.sawyer at me.com> wrote:
> >>>
> >>> Are other clients supposed to transmit, and do they?
> >>> --
> >>> Tim
> >>> :wq
> >>>
> >>> On Aug 11, 2013, at 8:46 PM, Michael Hebert <mhebert1975 at gmail.com>
> >>> wrote:
> >>>
> >>> I just changed menu 18=0 on both rtcms. I also changed the menu 7 to
> >>> 3000.
> >>>
> >>> No strange messages on level 3. Standard  Hungup
> 'Zap/pseudo-1855322317'
> >>>
> >>> No TX on client 2 now
> >>>
> >>>
> >>> On Sun, Aug 11, 2013 at 10:34 PM, Tim Sawyer <tim.sawyer at me.com>
> wrote:
> >>>>
> >>>> Menu 18 = 1 will be making local PTT. You want 18 = 0 with duplex=2.
> >>>> Leave the TX buffers long - around 2000 or 3000 until you figure out
> what is
> >>>> wrong.
> >>>>
> >>>> Are you getting any strange message on the Asterisk console with
> verbose
> >>>> level 3?
> >>>> --
> >>>> Tim
> >>>> :wq
> >>>>
> >>>> On Aug 11, 2013, at 7:58 PM, Michael Hebert <mhebert1975 at gmail.com>
> >>>> wrote:
> >>>>
> >>>> Very interesting. Playing around with the settings on both RTCMs and
> >>>> found it works with menu 7 set for 600 and menu 18 set for 1.
> >>>>
> >>>> If I set menu 18 to 0 the non master client, it will not transmit.
> >>>>
> >>>> Also, I checked my rpt.conf and duplex=2
> >>>>
> >>>>
> >>>> On Sun, Aug 11, 2013 at 9:01 PM, Matthew <n8ohu at yahoo.com> wrote:
> >>>>>
> >>>>> This might sound like an odd question, but did chan_voter compile
> >>>>> cleanly for you? I just grabbed the latest svn code and it did not
> compile
> >>>>> for me at all. The error it gave me I would need to check tomorrow,
> as I'm
> >>>>> currently not at the computer.
> >>>>>
> >>>>> Matthew Pitts
> >>>>> N8OHU
> >>>>>
> >>>>> Sent from my Verizon Wireless 4G LTE smartphone
> >>>>>
> >>>>> -------- Original Message --------
> >>>>> Subject:Re: [App_rpt-users] RTCM simulcast help
> >>>>> From :Michael Hebert
> >>>>> Date :Sun, 11-Aug-2013 21:54
> >>>>> To :Jim Duuuude
> >>>>> CC :app_rpt mailing list
> >>>>>
> >>>>> Just changed both of them to 3000 and rebooted. Also, rebooted the
> >>>>> asterisk machine.
> >>>>>
> >>>>> Still no TX on KD5DFB_site1=xxx,transmit
> >>>>>
> >>>>>
> >>>>> On Sun, Aug 11, 2013 at 8:39 PM, Jim Duuuude <
> telesistant at hotmail.com>
> >>>>> wrote:
> >>>>>>
> >>>>>> well, why dont you try something higher then 480...
> >>>>>>
> >>>>>> ________________________________
> >>>>>> Date: Sun, 11 Aug 2013 20:37:49 -0500
> >>>>>> Subject: Re: [App_rpt-users] RTCM simulcast help
> >>>>>> From: mhebert1975 at gmail.com
> >>>>>> To: telesistant at hotmail.com
> >>>>>> CC: app_rpt-users at ohnosec.org
> >>>>>>
> >>>>>> 1) S/W Version: 1.26 08/10/2013 on both of them
> >>>>>>
> >>>>>> 2) 480 on both of them
> >>>>>>
> >>>>>>
> >>>>>> On Sun, Aug 11, 2013 at 8:34 PM, Jim Duuuude <
> telesistant at hotmail.com>
> >>>>>> wrote:
> >>>>>>
> >>>>>> 1) What version of RTCM firmware are you running?
> >>>>>>
> >>>>>> 2) What do you have your TxBufferLength set to (in the RTCM) ?
> >>>>>>
> >>>>>> Jim
> >>>>>>
> >>>>>> ________________________________
> >>>>>> Date: Sun, 11 Aug 2013 19:43:36 -0500
> >>>>>> From: mhebert1975 at gmail.com
> >>>>>> To: app_rpt-users at ohnosec.org
> >>>>>> Subject: [App_rpt-users] RTCM simulcast help
> >>>>>>
> >>>>>> All,
> >>>>>>
> >>>>>> I am trying to enable simulcast on my system. I have gone into the
> >>>>>> voter.conf and added the "transmit" statement. The 2nd repeater is
> not
> >>>>>> transmitting. I am using menu 98 and do not see the "PTT : 0"
> changing to 1
> >>>>>> or the red TX indicator lighting up
> >>>>>>
> >>>>>> I have done a astres.sh and rebooted both RTCMs
> >>>>>>
> >>>>>> Here is my voter.conf
> >>>>>>
> >>>>>> [general]
> >>>>>> port = 667
> >>>>>> buflen = 120
> >>>>>> password = xxx
> >>>>>>
> >>>>>> [28304]
> >>>>>> KD5DFB_main=xxx,transmit,master
> >>>>>> KD5DFB_site1=xxx,transmit
> >>>>>>
> >>>>>>
> >>>>>> Here is my menu 98 on the RTCM
> >>>>>>
> >>>>>> GPS Lock: 1
> >>>>>> Connected: 1
> >>>>>> COR: 1
> >>>>>> EXT CTCSS IN: 0
> >>>>>> PTT: 0
> >>>>>> RSSI: 255
> >>>>>> Current Samples / Sec.: 8000
> >>>>>> Current Peak Audio Level: 1496
> >>>>>> Squelch Noise Gain Value: 21, Diode Cal. Value: 36, SQL pot 134
> >>>>>> Current Time: Mon  Aug 12, 2013  00:40:50.800
> >>>>>> Last Rx Pkt System time: 08/12/2013 00:40:50.800, diff: 0 msec
> >>>>>> Last Rx Pkt Timestamp time: 08/12/2013 00:40:50.780, diff: 20 msec
> >>>>>> Last Rx Pkt index: 0, inbounds: 0
> >>>>>>
> >>>>>>
> >>>>>> _______________________________________________ App_rpt-users
> mailing
> >>>>>> list App_rpt-users at ohnosec.org
> >>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >>>>>>
> >>>>>>
> >>>>>
> >>>>
> >>>> _______________________________________________
> >>>> App_rpt-users mailing list
> >>>> App_rpt-users at ohnosec.org
> >>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >>>>
> >>>>
> >>>>
> >>>> _______________________________________________
> >>>> App_rpt-users mailing list
> >>>> App_rpt-users at ohnosec.org
> >>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >>>>
> >>>
> >>>
> >>
> >>
> >
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130813/3b1660e8/attachment.html>