[App_rpt-users] Audio level test tone with Beagleboard xm and LOX board.

[Jim Duuuude]

Why dont you try that from the Asterisk CLI???

(do "asterisk -r" from the Linux command line)

Jim

Date: Mon, 19 Aug 2013 16:24:22 -0700
From: harvard5362 at yahoo.com
To: tim.sawyer at me.com
CC: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Audio level test tone with Beagleboard xm and	LOX board.

Hi  I made the edit to the file, however it still did not work. Here is the response I got. Perhaps I am not executing it from the correct place? root at N6LXX-1:~# rpt fun 29876 *989
-bash: rpt: command not found thank you Chris        From: Tim Sawyer <tim.sawyer at me.com>
 To: C B <harvard5362 at yahoo.com> 
Cc: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org> 
 Sent: Monday, August 19, 2013 3:45 PM
 Subject: Re: [App_rpt-users] Audio level test tone with Beagleboard xm and LOX board.
   

Take the semicolon off the *989 line, restart asterisk and you'll be able to make tone.

--Tim:wq



On Aug 19, 2013, at 1:55 PM, C B <harvard5362 at yahoo.com> wrote: Hi Tried to get the test tone as per some of the instructions I have read thus far. I have looked at the rpt.conf file and it looks like it is set up to use *99 as it has the line in it *99=cop,6. The line with *989=cop,4 had a ; (semicolon) in for of it so I assume it is disabled. When I type on the CLI rpt fun 29876 *99 it does not send tone. Please tell me what I have done
 wrong. Thank you in advance for your help. Chris    _______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users



    
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130819/451e479a/attachment.html>