[App_rpt-users] Re : Re: Asterisk ended with exit status 1

[C B]

Thank you
 
Sounds like I should be ok running that way as I do not think I need any power control.
 
Could a BIOS setting in power management  somehow conflict with ACPI, perhaps a dumb question however I thought I would ask it.
 
Chris 

________________________________
 From: pete M <petem001 at hotmail.com>
To: C B <harvard5362 at yahoo.com>; David Osborn <david.osborn at manx.net>; app_rpt-users at ohnosec.org 
Sent: Monday, August 26, 2013 1:48 PM
Subject: Re : Re: [App_rpt-users] Asterisk ended with exit status 1
  


 
acpi is power management...

Without acpi you have full power all the time. No powee saving stuff. I think it is used to monitor fan speed bur not sure.



--- Message initial ---

De : "C B" <harvard5362 at yahoo.com>
Envoyé : 26 août 2013 15:04
A : "David Osborn" <david.osborn at manx.net>, app_rpt-users at ohnosec.org
Objet : Re: [App_rpt-users] Asterisk ended with exit status 1

 
Hi 
  
I tried the following and it did stop the error massages. 
  
- Disable ACPI and reboot your system. You need to edit /boot/grub/grub.conf and modify kernel parameters as follows:

kernel /vmlinuz-2.6.18-53.1.4.el5 ro root=LABEL=/ vga=0x314 acpi=off 
  
However I am not sure what ACPI does for the allstar link. 
  
will this have any negative impacts? 
  
or does this tell anyone what the problem may be? 
  
Chris 
 

________________________________
 From: David Osborn <david.osborn at manx.net>
To: app_rpt-users at ohnosec.org 
Sent: Monday, August 26, 2013 10:10 AM
Subject: [App_rpt-users] Asterisk ended with exit status 1
 


 


I claim no expert knowledge here but I was mucking around trying to get Acid running on a thin client – just for the heck of it really. Anyway, I got this error message, along with the log messages about a problem with the Zaptel Configuration, and I found a reference to this issue here: http://www.easyasterisk.org/modules/smartfaq/faq.php?faqid=1 

Booting the thin client with ACPI disabled cured the problem with Zaptel, but then the LAN port wouldn’t come up L so I was still stymied! 

Anyway I don’t know if this will help, but it might be worth a go. 

David Osborn 

GD4HOZ 
   
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users


      
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130826/ff2c590f/attachment.html>