[App_rpt-users] How to set MAC address on Beagleboard xM with Pickle Linux?

[Bob]

OK... found it and I figured it out. 

Edited /etc/network/interfaces

ADDED the following at the end of the file:

  hwaddress ether xx:xx:xx:xx:xx:xx

After rebooting, the "permanent" MAC address is on the card, so it now acts
as a hardware MAC on bootup. Saved the SD card image as my new baseline
backup for Pickle should I mess something up :-)

Now I can set a static address in my router for the Beagleboard-xM.

Still learning as I go

Thanks,
Bob
KK6ECM

-----Original Message-----
Date: Sat, 30 Nov 2013 21:28:00 -0800
From: kk6ecm <kk6ecm at gmail.com>
To: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
Subject: [App_rpt-users] How to set MAC address on Beagleboard xM with
	Pickle Linux?
Message-ID: <9C81A5D0-EFCE-432E-B91F-27B99572E300 at gmail.com>
Content-Type: text/plain; charset="us-ascii"

> 
> Is there a way of setting the MAC address on a Beagleboard xM with Pickle
Linux? The Beagleboard xM MAC address is generated each time it boots to a
random configuration.

Thanks,
Bob
KK6ECM