[App_rpt-users] Question regarding interfacing to a Kenwood Nextedge Repeater NXR-710/810

[Ed Wilhelm]

Haven't hooked up a URI to one but have done some other things.
Your transmit audio should be "microphone" audio, not pre-emphasized. Pin 9.
Rx audio is at 11, squelched. PTT at 16 and TOR can be assigned under 
function port to whatever pin you like.

In KPG-129D go to channel edit and set operation mode to duplex not 
repeater. Now the URI should control and handle audio.

Should work on analog or digital. Use simple USB not dsp.

Ed W8VT
Nodes 27849, 29496



On 12/29/2013 10:28 PM, Lu Vencl wrote:
>
> I know this is a shot in the dark and I am probably the only one 
> trying this, but is there by chance anyone that has successfully 
> interfaced a URI to a Kenwood NEXEDGE® Repeater NXR-710/810?
>
> My challenge is this.
>
> 1.Can't seem to find a way to feed in pre-emphasize TX audio.. Not a 
> show stopper, but sure would be nice if I could. I can always run 
> regular mode.. Tried the TX data input but got no audio
>
> 2.When using external PTT, it mutes the TX audio for some reason. 
> Seems as when the repeater is receiving audio, and the URI bring PTT 
> low on the External PTT, it mutes the audio completely. You hear no 
> repeat audio.
>
> I am using in rpt.conf,  Duplex =1.. If I do Duplex =0, then I get the 
> internal repeat audio, but it does not take advantage of the Allstar 
> processed audio such as audio delay and DTMF muting.
>
> There has to be a better way and has hoping someone has already 
> succeeded in this challenge. I can email you the programming file to 
> the repeater if you wish.
>
> Thanks in advance.
>
> Lu, KA4EPS
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20131230/d59aa6e3/attachment.html>