[App_rpt-users] Avoid squelch noise after receiving a signal

[Ken]

It can be made to cover up any tail that the repeater is repeating, but the
real reason for it is to help you eliminate the tail that your *own* radio
is generating when the repeater carrier drops.

 

73

 

Ken

 

From: Shane Morris [mailto:edgecomberts at gmail.com] 
Sent: Sunday, February 17, 2013 12:29 PM
To: Ken
Cc: Thomas Delmonego; app_rpt mailing list
Subject: Re: [App_rpt-users] Avoid squelch noise after receiving a signal

 

So, you're saying the tail is still there, but you don't hear it because
Asterisk stops transmitting the CTCSS tone just before the tail starts,
meaning the receiving radios actually "don't" hear it?

Interesting way of looking at the issue, thats for sure...!

On 18/02/2013 4:26 AM, "Ken" <ke2n at cs.com> wrote:

Ciao Thomas

 

The squelch "tail" is usually eliminated by using CTCSS (so called PL) on
the transmitted signal and corresponding PL detection on receive.  I am not
sure how common that is in EU though .

 

On the repeater you need (usbradio.conf)

 

txtoctype=notone

 

With this, Asterisk stops transmitting the CTCSS tone about 600 milliseconds
before dropping the carrier - radios that are using tone squelch will not
hear any noise at all when the other station stops transmitting.  

 

Some receivers need > 600 milliseconds for the tone squelch action. It is
possible to make this time delay longer, if needed.

 

73

 

Ken

 

From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Thomas Delmonego
Sent: Sunday, February 17, 2013 11:53 AM
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] Avoid squelch noise after receiving a signal

 


Hi,
it's possible to avoid the typical squelch noise after the reception of a
valid signal from a repeater RX? Is there a specific setting, if yes in what
file?
Many thanks for help!
73! Thomas, IW3AMQ


_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130217/8149130c/attachment.html>