[App_rpt-users] Switching to app_rpt only no more controler.

[Keith Goobie]

This MSR2000 diagram you might find handy.   It helped us a lot.

Keith


On 1/16/13 12:37 PM, "pete M" <petem001 at hotmail.com> wrote:

> Hi, In the last few weeks I¹ve been into connecting our club node 27821 to our
> rc-210 controler.
>  
> Now we allways had some memory corruption problem with our controler (have to
> do with some ground loops, thats what I¹ve been told..)
>  
> Now I have the OK from the club president to swith this whole thing to
> Allstar!
>  
> But before doing so I have a few question. Anyone have schematics to connect a
> URI to a MSR2000? same with MSF5000 and Desktrak. (we have a desktrac, and we
> will receive soon a MSF5000 to replace it, and I dont know if I will contect
> this to the msf or the desktrak )
>  
> what computer power I should be looking for, I will use the DSP fonction to do
> the cor ctcss... there will be a third node on the computer that will also do
> a remote base..
>  
> Thanks for your time.
>  
>  
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-- 
keith at goobie.org
Keith Goobie
Richmond Hill, ON, CANADA

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130116/a9c16717/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: wiring-4.pdf
Type: application/octet-stream
Size: 30824 bytes
Desc: not available
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130116/a9c16717/attachment.obj>