[App_rpt-users] Voter Question

[Bill Hurlock]

I have a node setup with 2 RTCM modules, One for Main TX/RX and System timing/GPS and the second is handling the voter with RX on the system. I have GPS and it is working and enabled properly on both RTCM's. All radios are the same and everything is currently running on the same LAN for testing. The voting is seamless, however when the node is voted to the voter RX it sounds like there is some packet loss on its audio. I have tweeked buffer delay and nothing fixes this problem. I have tried a different RTCM with the same results. The main RX audio sounds very clean. The switching is clean with no repeat words or missing words. The other thing that shows up is on a unkey to the repeater it echos about the last word sent to the repeater just prior to unkey. I can tweek that out but than the missing packet issue is worse. Any ideas on this one? I'm sure this is just something stupid on my part in the configs.

Bill Hurlock
CPCommunications
856-234-1661 Office
856-264-1010<http://www.totalrf.com/> Cell
www.cpcomms.com<http://www.cpcomms.com/>
WA2TQI

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130718/467010db/attachment.html>