[App_rpt-users] PL Encode Disable

[Robert Garcia]

Matthew,

That is correct, sorry for having so much trouble trying to explain.

Robert
N5QM

On Fri, Jul 26, 2013 at 9:44 PM, Matthew Pitts
<daywalker_blade_2004 at yahoo.com> wrote:
> In essence, what you want is to allow PL for normal operation, but have
> repeater ID an "random announcements" not have it, so users only hear actual
> repeater activity if they have a receive PL tone set, correct?
>
> Matthew Pitts
> N8OHU
>
>
> ________________________________
> From: Robert Garcia <robert at n5qm.com>
> To: Tim Sawyer <tim.sawyer at me.com>
> Cc: APP_RPT <app_rpt-users at ohnosec.org>
> Sent: Friday, July 26, 2013 10:25 PM
> Subject: Re: [App_rpt-users] PL Encode Disable
>
> Tim,
>
> My goal is to not have IDs encoded with a PL tone.
>
> I need to trigger an output pin on the URI to do so using SimpleUSB to tell
> the repeater not to send a PL with the current audio.
>
> I hope that is a better explanation.
>
> Robert
> N5QM
>
> On Friday, July 26, 2013, Tim Sawyer wrote:
>
> IDs and system messages can be disabled with configuration setting in
> rpt.conf. But, from your email, it's not clear what you want to do.
> --
> Tim
> :wq
>
> On Jul 26, 2013, at 4:12 PM, Robert Garcia <robert at n5qm.com> wrote:
>
>> All,
>>
>> I have sifted through the documentation, but I haven't been able to
>> find much that directly relates to this.
>>
>> When using simpleusb as an interface, can you setup one of the I/Os to
>> trigger a PL enable or disable input on a radio?  The goal would be to
>> disable IDs and system messages from being encoded as is normally
>> configured on external controllers.
>>
>> Robert
>> N5QM
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>