[App_rpt-users] Access Command Mode With A Macro

[Jon Rorke]

Ok my original answer is not correct.

it should be like this:

1=*425555*327999#

So if you execute macro *51, you node will command node 25555 to connect 
to 27999.
This works as long as your node is already connected to node 25222.

Jon RQ



On 7/31/2013 2:43 PM, Jon Rorke wrote:
> yes
> On 7/31/2013 2:38 PM, Johnny Keeker wrote:
>> The question is, can a macro be created to connect to a node and then 
>> put it in the command mode?I've tried creating the usual macro example.
>> [macro]
>> 1=*325555*425555#
>> *51 only calls the 25555 node yet it does not take into account the 
>> *425555
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130731/9ee9a5c5/attachment.html>