[App_rpt-users] Re : Re: Need connection for msf5000.

[pete M]

Thats the info I have!.. but cant find the physical place on the board!....

Unless I dont look at the good board.. ;-)

--- Message initial ---

De : "Bryan D. Boyle" <bdboyle at bdboyle.com>
Envoyé : 2 juin 2013 17:01
A : "pete M" <petem001 at hotmail.com>
Cc: App_rpt-users at ohnosec.org
Objet : Re: [App_rpt-users] Need connection for msf5000.

from my notes:

all on control board.

tp3: discriminator rx
tp4: tx in
tp9: ptt active low
ag: ground

there's extensive docs on repeater-builder.com, free for the asking, that goes into EVERYTHING you may need to know about interfacing to the 5k.
--
Bryan
Sent from my iPhone 5...small
keyboard, big fingers...please
forgive misspellings...



On Jun 2, 2013, at 16:36, pete M <petem001 at hotmail.com> wrote:

> Been looking all over the place for a good info on how to interface my msf5000 to my URI.
>
> Got some stuff that point to some test point, but I just cant find them on the digital control board.
>
> Anyone have a photo or a service manual the point where are the test point on the controler so that I can find them? Getting pretty frustrated here...
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users