[App_rpt-users] Compiling app_rpt with Fedora 18 on Cubieboard

[Peter Watkins]

Dear all,

I've purchased a Cubieboard to connect with a URI and app_rpt.

I've been attempting to compile the software using Fedora 18 (for Cubieboard), largely step-by-step with phase1.sh, and using a slightly modified phase2.sh.

All went well with phase1.sh but I have an error with the phase2.sh script - the output is as follows:
...

    Generating input for menuselect ...
    make[1]: Entering directory `/usr/src/astsrc/zaptel'
    echo "You do not appear to have the sources for the 3.4.24-1.0.a10.fc18.armv7hl.a10 kernel installed."
    You do not appear to have the sources for the 3.4.24-1.0.a10.fc18.armv7hl.a10 kernel installed.
    exit 1
    make[1]: *** [modules] Error 1
    make[1]: Leaving directory `/usr/src/astsrc/zaptel'
    make: *** [all] Error 2
    Failure: Unable to compile Zaptel 2
    Fatal error: Unable to install Asterisk!

I checked the kernel headers, and these are later than those shown above;


    [root at cubie-f18-v7hl ~]# yum -y install kernel-devel kernel-headers
    Loaded plugins: langpacks, presto, refresh-packagekit
    Package kernel-imx-devel-3.6.10-8.fc18.armv7hl already installed and latest version
    Package kernel-headers-3.9.4-200.fc18.armv7hl already installed and latest version
    Nothing to do

I think that the obvious thing is to install the above kernel sources, but I'm not quite certain how to do this>
Can someone point me in the right direction? Or suggest a workaround?

Thanks Peter
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130607/a0bfe924/attachment.html>