[App_rpt-users] Looking for the XIPAR experts

[Corey Dean]

I run it on my UHF machine and am quite happy with it.  Randy, KB3HJC, also runs it on his Carlisle, PA repeater with 2 voting receivers.  Once I get data to my VHF repeater site that will also have voting receivers attached to it.  It works quite well!

Corey N3FE
________________________________________
From: app_rpt-users-bounces at ohnosec.org [app_rpt-users-bounces at ohnosec.org] On Behalf Of Robert a. Poff [wb3awj at comcast.net]
Sent: Friday, March 15, 2013 10:55 PM
To: Ron Simpson; app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Looking for the XIPAR experts

I ran some tests using the XIPAR voting.
Works just fine. I'd say equivalent performance to a Doug Hall voter.

Not very hard at all to set up.
Just follow what it says here:
http://www.xelatec.com/xipar/simplevoter
or here:
http://www.allstarnode.com/viewtopic.php?f=5&t=33


WB3AWJ
Allstar 27784, etc.
--
Sent from my Android phone with K-9 Mail. Please excuse my brevity.
--
This message was scanned and is believed to be clean.
Click here to report this message as spam.<http://simba.repeater.net:8080/cgi-bin/learn-msg.cgi?id=5C3B71FA3.AE1D2>