[App_rpt-users] Something is rotten in the state of Denmark

[Scott Weis]

Can you post the output when you run radio tune rxnoise?

 

From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Pierre Martel
Sent: Wednesday, March 27, 2013 10:39 PM
To: APP RPT
Subject: [App_rpt-users] Something is rotten in the state of Denmark

 

Got that phrase in the head, and could not find a good title for the mail
;-)

 

Ok Here I am again.

 

Still with my project to have a full App_rpt controler for my 2 repeater
system.

 

 

I manage to have our msr 2000 in the shack today cause the exiter is giving
us some trouble.

 

so I said, lets fix the exiter AND plug in the URI so that I wont have to do
this on site.

 

exiter is ok, well for now...

 

So I connect the URI pin 22 (mic AC) to pin 5 of the receiver inside the
msr2000, why 22 there is a big dc bias at this place so uning the mic dc
would nt be wise, I beleive..

 

now I go to the computer set active radio usb 28739

 

now I do radio tune rxnoise.. It fail.

 

there is at leat 200 mv of audio there. changed rxboosst in usbradio.conf
for that node, reload, no difference.

 

still did the radio tune rxvoice and rxtone.

 

then tested without saving , I have a big white noise at the end of every
receiption before the coutesy tone..

 

what Am I doing wrong?

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130328/33392085/attachment.html>